zhangwenjian
7aa1871664
note:support filter for each note channel
...
Signed-off-by: zhangwenjian <zhangwenjian@xiaomi.com>
2024-10-13 14:05:50 +08:00
yinshengkai
c018be66bd
note: merge nc_systime_nsec and sec
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-13 14:05:50 +08:00
zhaoxingyu1
0be1196046
note_driver: time_t outputs in 64-bit format
...
Signed-off-by: zhaoxingyu1 <zhaoxingyu1@xiaomi.com>
2024-10-13 14:05:50 +08:00
cuiziwei
19851c0979
note: Move the instrument register to note_initialize
...
avoid the instrument doesn't get registered in some case
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-13 14:05:50 +08:00
Xiang Xiao
08829bd388
mtd/nvs: Trigger recovery process in nvs_startup
...
when mtd driver return -EBADMSG
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-10-13 03:10:19 +08:00
Xiang Xiao
7b2dbcf50a
drivers/optee: Return error if optee_recv return prematurely
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-10-13 02:48:29 +08:00
Bowen Wang
143466baed
drivers/pci: fix pci framework warning in 32bit chip
...
In file included from pci/pci.c:30:
pci/pci.c: In function 'pci_setup_device':
pci/pci.c:449:66: warning: right shift count >= width of type [-Wshift-count-overflow]
449 | pci_write_config_dword(dev, base_address_1, res->start >> 32);
| ^~
pci/pci.c: In function 'pci_presetup_bridge':
pci/pci.c:541:51: warning: right shift count >= width of type [-Wshift-count-overflow]
541 | ctrl->mem_pref.start >> 32);
| ^~
pci/pci.c: In function 'pci_postsetup_bridge':
pci/pci.c:604:57: warning: right shift count >= width of type [-Wshift-count-overflow]
604 | (ctrl->mem_pref.start - 1) >> 32);
| ^~
CC: pthread/pthread_release.c pci/pci_ecam.c:71:12: warning: initialization of 'int (*)(struct pci_bus_s *, unsigned int, int, int, uint32_t *)' {aka 'int (*)(struct pci_bus_s *, unsigned int, int, int, long unsigned int *)'} from incompatible pointer type 'int (*)(struct pci_bus_s *, uint32_t, int, int, uint32_t *)' {aka 'int (*)(struct pci_bus_s *, long unsigned int, int, int, long unsigned int *)'} [-Wincompatible-pointer-types]
71 | .read = pci_ecam_read_config,
| ^~~~~~~~~~~~~~~~~~~~
pci/pci_ecam.c:71:12: note: (near initialization for 'g_pci_ecam_ops.read')
pci/pci_ecam.c:72:12: warning: initialization of 'int (*)(struct pci_bus_s *, unsigned int, int, int, uint32_t)' {aka 'int (*)(struct pci_bus_s *, unsigned int, int, int, long unsigned int)'} from incompatible pointer type 'int (*)(struct pci_bus_s *, uint32_t, int, int, uint32_t)' {aka 'int (*)(struct pci_bus_s *, long unsigned int, int, int, long unsigned int)'} [-Wincompatible-pointer-types]
72 | .write = pci_ecam_write_config,
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-13 02:28:32 +08:00
xuxin19
4667163152
cmake:add driver thermal CMake scripts
...
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
2024-10-13 02:25:06 +08:00
Xiang Xiao
a5aea61537
driver: Post sempahore only when it's value is smaller than one
...
to avoid waking up the waiting thread redundantly.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-10-13 02:12:01 +08:00
fangpeina
3f1fd42f73
drivers/input: fix complie err about undefined
...
There will be compilation errors about undefined reference to `enter_critical_section'.
Fixed by include irq.h
Signed-off-by: fangpeina <fangpeina@xiaomi.com>
2024-10-13 02:03:40 +08:00
wangyongrong
ad2e6fb2ba
pci_ivshmem.c: ivshmem_support_irq API support
...
ivshmem based driver can use this api to judge weather current
ivshmem device support irq or not, and use polling mode or irq
mode to process the event.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-10-12 12:13:23 +08:00
Bowen Wang
99b6c77c79
drivers/rptun: minor fix about rptun
...
1. follow the nxstyle, change formot of rptun_init();
2. remove used wqueue header file;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-12 12:12:00 +08:00
xuxingliang
62f0126b06
drivers/segger: add note vprint support
...
Print note log to sysview terminal.
See https://www.segger.com/products/development-tools/systemview/#logging-output
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
2024-10-12 09:58:00 +08:00
buxiasen
c4f82c1f66
drivers/timer: fix goldfish timer did not included in cmake
...
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
2024-10-12 09:31:15 +08:00
buxiasen
9ea38368ad
goldfish_timer: fix interrupt not cleared
...
will cause a loop interrupt handler, in some new version qemu
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
2024-10-12 09:31:15 +08:00
ligd
3479622fec
serial: use nxsig_tgkill instead of nxsig_kill
...
Caused nxsig_tgkill is for the one thread, nxsig_kill for the group
Signed-off-by: ligd <liguiding1@xiaomi.com>
2024-10-12 09:30:37 +08:00
Bowen Wang
313d6df787
include/nuttx.h: replace all the align macros to nuttx version
...
1. add IS_ALIGNED() definitions for NuttX;
2. replace all the ALIGN_UP() and ALIGN_DOWN() to use common
align implementation;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-11 16:55:43 +08:00
Yongrong Wang
976c4173f0
rpmsg_ping.c: fix msg data memset length
...
The range of memset exceeds the size of the buffer
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
2024-10-11 14:59:26 +08:00
Yongrong Wang
4b77dd03db
rpmsg_ping.c: change msg cmd type for more compatible
...
Use bit mask method to represent the command, because it's more
convenient to express multiple characteristics simultaneously.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
2024-10-11 14:59:26 +08:00
Yongrong Wang
1cf97ac4d0
rpmsg_ping.c: improve log level to LOG_EMERG
...
Usually rpmsg ping logs are needed during testing,
but too many other module logs can easily overwrite it,
so improve the rpmsg ping log level, later we can setlogmask to
a higher log level to mask other modules' logs.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
2024-10-11 14:59:26 +08:00
Yongrong Wang
b96ad59d69
rpmsg_ping.c: change check data to fluctuation value
...
We can found the error happend packet more accurately based
on the data value.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
2024-10-11 14:59:26 +08:00
yinshengkai
c83858bbb6
note: fix note_common unaligned access
...
Data in ARMV8-M may be aligned with less than 4 bytes, resulting in USAGE FAULT
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 11:55:17 +08:00
yinshengkai
464d284587
drivers/note: simplify notesnap_dump logic
...
RTOSXMDPYX-969
Crash at startup, index is 0 will cause loop printing
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 11:55:17 +08:00
yinshengkai
a70175ea06
note: make sched_note_start depend on INSTRUMENTATION_SWITCH
...
In some cases, we only need to use INSTRUMENTATION_DUMP to record custom data,
and we don't want the thread start and end information
Move this part to INSTRUMENTATION_SWTICH for recording
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 11:55:17 +08:00
yinshengkai
453cde945f
note: add note stream drivers
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 11:55:17 +08:00
yinshengkai
43d96a5d9e
note: Increase crash dump buffer
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 11:55:17 +08:00
zhangwenjian
aec44de921
ICANON mode need echo every bytes
...
Signed-off-by: zhangwenjian <zhangwenjian@xiaomi.com>
2024-10-11 03:11:26 +08:00
zhangwenjian
7532a0e833
serial:need check old config before setting tty
...
Signed-off-by: zhangwenjian <zhangwenjian@xiaomi.com>
2024-10-11 03:11:26 +08:00
zhangwenjian
df5c876932
libc:getline support backspace
...
Signed-off-by: zhangwenjian <zhangwenjian@xiaomi.com>
2024-10-11 03:11:26 +08:00
yinshengkai
ec691cc5e4
tools: prasetrace.py supports parsing syslog
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 01:30:11 +08:00
yinshengkai
211a56910a
syslog: support syslog redirection to sched_note
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-11 01:30:11 +08:00
ligd
e608d5522d
syslogmask: add default value Kconfig to syslogmask
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2024-10-11 01:30:11 +08:00
yinshengkai
02eb280302
arch/perf: modify the return value of up_perf_gettime to clock_t
...
When using alarm_arch implementation, 64-bit time can be returned. Using unsign long will cause precision loss.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-10 23:17:14 +08:00
yintao
37a30023f5
nuttx/drivers: add ept_release_cb for destroy server resource
...
use ept_release_cb to destory rpmsg services server dile resource
to avoid the used-after-free issue
Signed-off-by: yintao <yintao@xiaomi.com>
2024-10-10 08:44:29 +08:00
hujun5
e249dd2672
arch: support customized up_cpu_index() in AMP mode
...
Some app with same code runs on different cores in AMP mode,
need the physical core on which the function is called.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
2024-10-10 02:38:40 +08:00
Bowen Wang
092bdec20b
drivers/serial: support force panic only when repeat the panic char
...
We can increase the panic repeat count to avoid abnormal crashes
caused by serial port interference.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-10 02:38:12 +08:00
Bowen Wang
bbb7f436d4
serial.c: should protect the fds when calling poll_notify
...
1. Use critical_section to protect the fds array;
2. Use critical_section and sched lock to protect the poll notify, because
poll notify may cause context switch, delay the context swtich to
sched_unlock();
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-10 02:38:12 +08:00
ligd
0a70235b0c
serial/pl011: fix can't up_putc() after setup
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2024-10-10 02:38:12 +08:00
ligd
94cc99d01b
serial: fix cu ctrl+c crash
...
__assert
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/libs/libc/assert/lib_assert.c:36
nxsem_recover
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/semaphore/sem_recover.c:86 (discriminator 3)
nxtask_recover
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/task/task_recover.c:79
nxtask_exithook
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/task/task_exithook.c:448
nxtask_terminate
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/task/task_terminate.c:110
pthread_cancel
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/pthread/pthread_cancel.c:110
cu_main
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/apps/system/cu/cu_main.c:485
nxtask_startup
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/libs/libc/sched/task_startup.c:70 (discriminator 2)
nxtask_start
/home/work/ssd1/workspace/MiRTOS-N62-Rel-4.0-Pre-Build/nuttx/sched/task/task_start.c:134
Signed-off-by: ligd <liguiding1@xiaomi.com>
2024-10-10 02:38:12 +08:00
sunjikun
ee306d47fd
drivers/serial: Add 16550_DLF_SIZE option for DesignWare UART.
...
Signed-off-by: sunjikun <sunjikun@xiaomi.com>
2024-10-10 02:38:12 +08:00
Bowen Wang
89c49c53a7
virtio-mmio/pci: add alloc_buf/free_buf for mmio and pci transport layer
...
And remove the virtio_alloc/free_buf implementation in virtio.c, because
these two apis has been moved to the OpenAMP
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
2024-10-09 23:32:58 +08:00
wangyongrong
0b1f45d600
rptun: rptun implements notify_wait through rvdev->notify_wait_cb
...
notify_wait has been remove in remoteproc ops and virtio_dispatch and
has been moved to the struct rpmsg_virtio_device in new OpenAMP,
so change the rptun too,
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-10-09 23:32:58 +08:00
Yongrong Wang
1b24139020
virtio-pci/mmio: Features change to 64 bit in all virtio_dispatch and fix compile warning
...
virtio/virtio-pci-legacy.c:399:48: warning: passing argument 2 of ‘pci_bus_write_io_dword’ makes integer from pointer without a cast [-Wint-con>
399 | pci_write_io_dword(vpdev->dev, vpdev->ioaddr + VIRTIO_PCI_GUEST_FEATURES,
| ^
| |
| void *
/home/wyr/work/code/project/vela/nuttx/include/nuttx/pci/pci.h:559:65: note: expected ‘uintptr_t’ {aka ‘long unsigned int’} but argument is of >
559 | int pci_bus_write_io_dword(FAR struct pci_bus_s *bus, uintptr_t where,
| ~~~~~~~~~~^~~~~
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
2024-10-09 23:32:58 +08:00
wangyongrong
5aeb644bc5
virtio: adapt to the new OpenAMP
...
Sync all the virtio api usage to sync with new OpenAMP
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-10-09 23:32:58 +08:00
wangyongrong
8e799ff823
rpmsg: upgrade API passing on parameters with the upgrade of OpenAMP
...
All the rpmsg transport layer and rpmsg services sync the API
with new OpenAMP
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
2024-10-09 23:32:58 +08:00
buxiasen
264252497c
pm: fix pm_wakelock_uninit api block, wd api need irq not disabled
...
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
2024-10-09 23:31:49 +08:00
dongjiuzhu1
a005f4bff1
drivers/power: using baterr/batinfo to avoid frequency log output
...
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2024-10-09 23:31:49 +08:00
zhangshengchao
e26a01d9a6
regulator:add bypass logic when registering
...
do not control regulators when set bypass flag
Signed-off-by: zhangshengchao <zhangshengchao@xiaomi.com>
2024-10-09 23:31:49 +08:00
wanggang26
955a3838f7
mmcsd: refine emmc capacity calculate
...
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
2024-10-09 22:24:18 +08:00
yinshengkai
3271142b87
note: print without relying on format strings
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2024-10-09 22:23:29 +08:00