Adds a configuration that combines the `nimble` example with a SMARTFS
file system configured in the chip's flash.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
* Initial experimental / work in progress implementation.
* New board name is esp32s3-ws-lcd128.
* Supports Kconfig delectable w/wo touch variants (lcd gpios difference).
* IMU QMI8658 bringups is put into esp32s3/common/src to share with other
boards. Pin defines are located at <board>include/board.h and referenced
with `#include <arch/board/board.h>`.
* Supported configurations: nsh, ostest, coremark, touch-lvgl, notouch-lvgl,
imu-qmi8658, watchdog.
* Does not have touch panel driver yet.
* Created board documentation. Added sphinx inline cross-references.
* TODO: Fix SPI GC9A01A LCD pixel format colors.
* TODO: Create I2C CST816S touch panel driver.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
Updated the `rmt` defconfig description for the Espressif's SoCs.
Use the `irtest` testing app (instead of the deprecated `rmtchar`)
to test the RMT peripheral.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This commit adds the Documentation to MPR121 Keypad and the board
profile documentation to STM32F4Discovery board.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Enable USART3 support for STM32F412 and use it as the default NUCLEO-F412ZG nsh console path.
The ST-LINK virtual COM port on this board is wired to USART3 on PD8/PD9. Restore USART2 to its header-pin routing, switch the nsh defconfig to USART3, and update the board documentation to match the shipped solder-bridge configuration described in issue #17722.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
Add board support for on-chip bxCAN: stm32_can.c registers /dev/can0 via stm32_caninitialize() when CONFIG_STM32_CAN_CHARDRIVER is set; stm32_cansock.c calls stm32_cansockinitialize() for the socket-CAN path when CONFIG_STM32_CAN_SOCKET is set.
Signed-off-by: Alexey Matveev <tippet@yandex.ru>
This commit adds an entry for the ESP32-P4-Function-EV-Board's
`psram_usrheap` defconfig on docs.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Added stm32_usbdrdhost.c which adds USB FS host mode support using the
embedded PHY. Added Kconfig to select Device or Host.
Example config nucleo-h563zi:usbmsc added to test functionality
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Document the new mkpasswd-based password generation system and its
integration with the build process.
Changes:
* Add comprehensive mkpasswd tool documentation to components/tools
* Update SIM board docs to explain generated passwd workflow
* Update ESP32-C3-legacy board docs for passwd generation
* Update RX65N board docs with credential handling guidance
* Document how to configure and use BOARD_ETC_ROMFS_PASSWD_* options
* Explain security benefits of build-time generation vs static files
* Update all doc examples from default username "admin" to "root"
BREAKING CHANGE: Boards using static /etc/passwd files in ETC_ROMFS
must migrate to the new build-time generation workflow documented in
Documentation/components/tools/index.rst. The old static passwd files
are no longer present in migrated boards; boards that relied on them
will fail to build until credentials are configured via Kconfig.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
This commit documents the power management defconfig for the
ESP32-P4-Function-EV-Board.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
This adds support for the PBKDF2 algorithm in the ESP32 crypto
driver. Here, it will take advantage of the hardware-accelerated
implementation of SHA.
Signed-off-by: Vlad Pruteanu <pruteanuvlad1611@yahoo.com>
Add board documentation for the Stellaris LM3S6965 Evaluation Kit
including available configurations (nsh, qemu-flat, qemu-protected,
qemu-kostest, qemu-nxflat) and instructions for running and debugging
with QEMU.
Also add a Supported Boards toctree section to the Tiva platform
index to automatically include board documentation.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Add board-level support for ES7210 4-ch ADC on lckfb-szpi-esp32s3:
- configs/es7210/defconfig: Board configuration with I2C0, I2S0,
ES7210 driver enabled. I2S pins: BCLK=14, DIN=12, MCLK=38, WS=13,
sample rate 48kHz.
- src/esp32s3_board_es7210.c: Board init registering ES7210 on I2C0
bus with I2S0 as audio transport
- src/esp32s3_bringup.c: Call ES7210 board init on startup; skip
generic I2S audio device registration on I2S0 when ES7210 is
enabled to avoid conflicting audio device on the same port
- src/esp32s3-szpi.h: ES7210 I2C address and device path defines
- src/Make.defs: Build integration for CONFIG_AUDIO_ES7210
Tested: 48kHz/2ch/16bit recording on ESP32-S3 (lckfb-szpi N16R8),
verified with nxrecorder and es7210_test.
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Use static lower-half instances per timer and select the channel
through Kconfig and board data instead of passing runtime PWM
routing into the driver.
This keeps the HT32 PWM support aligned with the existing NuttX
pattern and documents the esk32 single-device TMR3 routing.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
Document the HT32F491x3 ESK32 board, build steps,
flashing flow, and validation commands. Add WSL and
PowerShell flash backends plus a Python wrapper.
Signed-off-by: Felipe Moura <moura.fmo@gmail.com>
Add UVC configuration for lckfb-szpi-esp32s3 board based on gc0308
camera config, with USB OTG and UVC gadget driver enabled in
standalone (non-composite) mode.
- defconfig: enable ESP32S3_OTG, USBUVC, UVC example app
- board doc: add uvc section with usage and host verification
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
Add detailed steps for copying nuttx.bin to eMMC via u-boot USB Mass
Storage (ums) mode, which exposes the eMMC as a USB drive on the host
PC for easy file transfer.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Fix 269 occurrences of duplicate "the" word typo found in 209 files
across source code, header files, and configuration.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Remove the CONFIG_K210_WITH_QEMU option and associated conditional
code paths. The reasons for removal are:
* Simplifies code path for real hardware by removing QEMU workarounds
* The current QEMU target uses sifive_u machine, which is not designed
for K210 emulation
* For RISC-V QEMU simulation, the qemu-rv (rv-virt) target is a better
choice
* Renode can be used as an alternative for K210 simulation if needed
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add WDT driver for K210 with support for both WDT0 and WDT1 peripherals.
This includes:
- Add k210_wdt.c and k210_wdt.h driver files with interrupt-based
watchdog timer functionality
- Add hardware register definitions in k210_wdt.h
- Add K210_WDT, K210_WDT0, K210_WDT1 Kconfig options
- Add memory map definitions for WDT0 (0x50400000) and WDT1 (0x50410000)
- Reorder WDT IRQ definitions (IRQ 21, 22) before UART0 (IRQ 33) in irq.h
- Add WDT initialization in board bringup for maix-bit
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
