Nothing in the controller driver is PCI-specific beyond finding the
registers and the interrupt, so an SoC wiring an xHCI controller
directly could not use any of it.
usbhost_xhci.c is now the driver; usbhost_xhci_pci.c is the PCI
attachment, holding the ID table, the BAR mapping and the MSI-X vector.
include/nuttx/usb/xhci.h carries what passes between them: the register
base, a way to attach the interrupt, and a name to report the controller
by, since a system may have more than one.
The interrupt belongs to the bus: the bus attaches and detaches it, and
the driver never holds an interrupt number.
USBHOST_XHCI is the driver and is not selectable on its own;
USBHOST_XHCI_PCI selects it. Another bus adds its own symbol beside it.
No functional change intended.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Justin Hammond <justin@dynam.ac>
HIDKBD_NOGETREPORT reads keyboard reports with DRVR_ASYNCH(), and that
macro is only defined when USBHOST_ASYNCH is set. The option selected
neither, so turning it on by itself fails at the call site with no hint
that a second option was meant to come with it.
Select it. Every in-tree configuration that sets NOGETREPORT already
resolves USBHOST_ASYNCH: ci20:jumbo and sama5d3-xplained:bluetooth
through USBHOST_HUB, and the two linum-stm32h753bi configurations by
setting it directly. No existing build changes.
The two that set it directly no longer can, since a selected symbol is
no longer settable, so savedefconfig drops the line. Their defconfigs
are normalized here to keep them canonical.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Justin Hammond <justin@dynam.ac>
A host that enumerates a device says nothing about it unless the whole of
CONFIG_DEBUG_USB_INFO is on, and then it says a great deal else besides.
The quietest case is the one that matters most: a device no class driver
claims produces no output at all, so a user with an unsupported device
sees exactly what a user with no device sees.
Add CONFIG_USBHOST_ANNOUNCE, reporting each device once, in the shape a
reader is likely to recognise from other systems: where it is, what it is,
its vendor, product and release, and the maker, product and serial number
it reports in its own string descriptors. Those cost a control transfer
each, so they are read only where a report was asked for, and only once
the device is addressed.
The report is made after binding rather than from within it, because a
composite device never reaches the class lookup: usbhost_composite() is
tried first and binds it. Whether a driver claimed the device is tracked
rather than read from the returned status, which the per interface loop
sets to OK whatever happened.
The port is given as the path from the root hub, and the path names the
bus, because a device on the first port of a hub and one on the first port
of a controller are otherwise reported identically. struct
usbhost_roothubport_s gains that bus number for the purpose; a driver that
does not set it reports zero, which is the only bus it has.
Class codes are translated where a name is more use than a number, which
includes the HID boot protocols, so a keyboard is reported as a keyboard.
Default n, so no existing configuration changes.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Justin Hammond <justin@dynam.ac>
A drive that has been anywhere near another operating system almost
always carries a partition table rather than a filesystem starting at
sector zero, so the single block device this driver registers is usually
the one thing nobody can mount. A USB stick written with an installer
image is a good example: sector zero holds a protective MBR, and what
somebody wants is the EFI system partition several gigabytes in.
Read the table and give each partition a block device of its own beside
the whole drive, named the way every other system names them. The
parsing is already in the tree and understands both MBR and GPT; this
only calls it and registers what it finds.
The whole-drive node stays exactly where it was, for anyone who wants
the raw thing or whose drive really does hold a bare filesystem.
Assisted-by: Claude:claude-opus-5
Signed-off-by: Justin Hammond <justin@dynam.ac>
The driver kept a character device, a ring buffer, a poll waiter list
and an encoder of its own, in parallel with everything the keyboard
upper half already provides. A USB keyboard was therefore the one
keyboard an application could not read like any other.
Register with keyboard_register() and report with keyboard_event(),
which removes the private character device and the four hundred lines
that served it. Special keys are reported with the SPEC event types
carrying a keycode, so an application no longer has to guess whether a
value in the character range is a character or an arrow key.
HIDKBD_ENCODED and HIDKBD_NODEBOUNCE go away with the code they guarded.
Encoding is now inherent to the event, and the previous report is no
longer an optimisation: a HID keyboard reports the keys that are down
rather than the transitions, so it is what tells a new press from a key
still held, and what tells that a key has been released.
Reporting the modifiers as keys is new, so it is behind
HIDKBD_REPORT_MODIFIERS and off by default.
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
Added support for USB host to use an USB CDC-ECM device.
This class is used for usb-ethernet adapters as well as many modems.
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Added support for selecting a different USB configuration.
Certain USB devices offer different classes using different
configurations. This allows a board file to provide a callback
to select the proper configuration for a given USB device.
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
This change adds support for the USB Transport Layer as described
in the bluetooth spec. Isochronous endpoints are not yet supported.
Because of limitations in the NuttX bluetooth stack, only one USB
device can be used. This driver will only allow one USB dongle to
use bluetooth.
A Laird USB BT4.2 dongle (from Mouser) was used for testing:
M/N BT851 1.0 1829, FCC ID:SQGBT850
lsusb: 04b4:f901 Cypress Semiconductor Corp. CYW20704A2
The following commands were used to test from the nsh prompt:
bt bnep0 scan start
bt bnep0 scan stop
bt bnep0 scan get
bt bnep0 info
The Linux gatttool was used to connect over wireless.
With the BDAddr found by "bt bnep0 info", start gatttool using:
gatttool -b BDAddr -I
Connect to the device using:
connect
Read the device name using the GAP device name UUID:
char-read-uuid 2a00
Part of the response is:
value: 41 70 61 63 68 65 20 4e 75 74 74 58
which is the string "Apache NuttX"
Using the interrupt pipe is recommended in the Get_Report
request section of the HID standard. This option has been
added to support some keyboards that refuse to return valid
keys when polled using the Get_Report request. Support for
the Caps Lock key, including LED, has also been added.
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit does two things:
1. First, it reorganizes the driver Kconfig files so that each is self contained. Before, a part of the driver configuration was in drivers/Kconfig and the rest was in in drivers/xyz/Konfig. Now, all of the driver configuration is consolitated in the latter.
2. Second, this commit correct numerous serious errors introduced in a previous reorganization of the driver Kconfig files. This was first noted by Nicholas Chin in PR270 for the case of the drivers/i2c/Kconfig but some examination indicates that the error was introduced into several other Kconfig files as well.
The nature of the introduced error was basically this:
- Nothing must intervene between the menuconfig selection and the following conditional configuration otpions.
- A previous PR erroneously introduced unconditional options between the menuconfig and the following confditional logic, thus corrupting the driver menus.
This error was easy to make because the driver Kconfig files were not well modularized. Making them fully self-contained should eliminate this kind of error in the future.
arch/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
sched/ audio/ crypto/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
Documentation/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
fs/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
graphics/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
net/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
drivers/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
include/, syscall/, wireless/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled.
configs/: Remove all references to CONFIG_DISABLE_POLL. Standard POSIX poll can no longer be disabled.
libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
Squashed commit of the following:
drivers/usbhost/usbhost_max3421e.c: Add USB tracing support. Fix compilation errors when assertions and debug is enabled.
drivers/usbhost/usbhost_max3421e.c: Fixes to get a clean compilation.
drivers/usbhost/usbhost_max3421e.c: Drivers is basically code complete.
drivers/usbhost/usbhost_max3421e.c: Missed a little bit of logic in the last commit.
drivers/usbhost/usbhost_max3421e.c: Completes implementatin of control transfers.
drivers/usbhost/usbhost_max3421e.c: Implements low-level part of packet receive.
drivers/usbhost/usbhost_max3421e.c: Reorder some functions add a little more transfer-related logic.
drivers/usbhost/usbhost_max3421e.c: Completes basic logic path for sending normal packets.
drivers/usbhost/usbhost_max3421e.c: Correct handling of SNDFIFO double buffering.
drivers/usbhost/usbhost_max3421e.c: Not necessary to set the ACKSTAT bit in host mode. Clean up some comments.
drivers/usbhost/usbhost_max3421e.c: Mostly cosmetic cleanup
drivers/usbhost/usbhost_max3421e.c: Revise some previous logic. Looks like the MAX3421E can handle 16 channels in host mode. A little bit of work on packet transfer logic.
Copy paste error fix
drivers/usbhost/usbhost_max3421e.c: Add some channel allocation logic.
drivers/usbhost/usbhost_max3421e.c: Add some initialization logic.
drivers/usbhost/usbhost_max3421e.c: Add logic to determine if a full or low speed device has been connected.
drivers/usbhost/usbhost_max3421e.c: Add interrupt handling and bus reset logic.
drivers/usbhost/usbhost_max3421e.c: Add framework for an MAX3421E host driver. Initial commit is just the STM32 OTGFS host driver with a few new SPI-related functions.
