This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
N/A
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: 丁欣童 <dingxintong@xiaomi.com>
Change-Id: If428e5fc65ace053420cc85c809ed7010b3df7d1
N/A
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found that sim_cpu_start() calls pthread_attr_init()
which locates not on the host OS but on the NuttX
- This commit fixes this issue by adding the symbol names
to nuttx-names.in
Impact:
- sim in SMP mode
- NOTE: stack usage for CPU1/2/3 IDLE is still incorrect on macOS
Testing:
- Tested with ostest on Ubuntu 18.04 (x86_64) and macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since this macro isn't check from host side after:
commit cee43ce280
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Fri Jul 16 02:23:59 2021 +0800
arch/sim: Initialize the idle thread stack info correctly
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that sim:smp does not work correctly on macOS
due to the recent changes
- Actually, it can not receive the IPI host signal, so if
a new task is scheduled on CPU1/2/3, it hangs.
- Finally, I found the issue depends on pthread stack settings
and perhaps it might affect the host signal handling.
- This commit fixes this issue by just reverting the pthread
stack setting only for macOS.
Impact:
- sim:smp on macOS
- Stack usage for CPU1/2/3 IDLE will be incorrect
Testing:
- Tested with ostest on macOS 11.4 (x86_64)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Cleaning during `clean_context` had the issue of remaking everything
when `menuconfig` was issued. That's because `menuconfig` has a
`clean_context` on its way.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
use the same condition check in declaration and reference
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7b05316e914708fceeddac394d784ee3720a3c1b
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia54efbbca4b69706150bc4178844b316688a104e
and change the default value of IDLETHREAD_STACKSIZE to 65536
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia54efbbca4b69706150bc4178844b316688a104e
1.Move all special process to mm_takesemaphore
2.Remove the support of recurive lock
3.Remove mm_trysemaphore function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie216a6294ab67c5d427f31b089beb15c532f08fe
1.Move all special process to mm_takesemaphore
2.Remove the support of recurive lock
3.Remove mm_trysemaphore function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie216a6294ab67c5d427f31b089beb15c532f08fe
