Modifies Kconfig and build tools to support flash encryption
and E-Fuse burning when flash encryption is enabled.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
The efuse initialization requires critical section to avoid a very
hidden corner case when flash encryption is enabled.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Moves the clearing of global variables to the very start
of the chip start up process. This avoids clearing some
globals that are initialized between the new location and
previous location.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
- Re-select LCD after soft reset during init. It looks that (soft) reset
affects SPI communication.
- Clear display during the initialization.
Signed-off-by: Jiri Vlasak <jvlasak@elektroline.cz>
Some display drivers, like ILI9341, support 3-wire 9-bit SPI. In
contrast to 4-wire 8-bit SPI, which uses dedicated CMD/DATA pin to
distinguish between CMD and DATA, 3-wire 9-bit SPI uses MSB of 9-bit
frame for this purpose.
Signed-off-by: Jiri Vlasak <jvlasak@elektroline.cz>
Ref: https://man7.org/linux/man-pages/man7/packet.7.html
1. For `socket(AF_PACKET, int socket_type, int protocol)`: When `protocol` is set to `htons(ETH_P_ALL)`, then all protocols are received. If `protocol` is set to zero, no packets are received.
2. For `bind`: `bind` can optionally be called with a nonzero `sll_protocol` to start receiving packets for the protocols specified.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
When app send a pkt-packet, then it will read back it and case some problem. Connection should not read back the message sent by itself.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
note/note_driver.c:2440:45: error: implicit declaration of function 'note_find_taskname'; did you mean 'note_get_taskname'? [-Werror=implicit-function-declaration]
2440 | FAR struct note_taskname_info_s *ti = note_find_taskname(pid);
| ^~~~~~~~~~~~~~~~~~
| note_get_taskname
note/note_driver.c:2440:45: error: initialization of 'struct note_taskname_info_s *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
note/note_driver.c:2444:26: error: invalid use of undefined type 'struct note_taskname_info_s'
2444 | strlcpy(buf, ti->name, len);
| ^~
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
The function sched_note_add should not be in the code
section of #ifdef CONFIG_SCHED_INSTRUMENTATION_SWITCH
Signed-off-by: yukangzhi <yukangzhi@xiaomi.com>
When tcb may has been released in caller, the return pointer to tcb->name is dangling pointer. So add a buffer in caller, even if tcb is released, buffer is still valid.
Signed-off-by: wangzhi16 <wangzhi16@xiaomi.com>
When opening the file succeeds but reading the file fails in
modlib_initialize, this will result in the open file not be closed.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
The clang compiler has also defined `__GNUC__`, which can't be used to
decide the compiler version.
And the version used to decide whether the builtin function
`__builtin_dynamic_object_size` exist is not correct.
Signed-off-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
avoid illegal address access caused by removing vlan
network cards during the traversal of vlan network cards
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
1. We add default PCP because some of our apps may not want to set PCP
manually (e.g. Our user may just ping with pre-set PCP)
2. The `vlan_qos` is used as PCP when setting Linux's priority mapping:
https://github.com/torvalds/linux/blob/v6.12/net/8021q/vlan.c#L590
Although `vlan_qos` is not used when creating VLAN on Linux, we can
use it as PCP on creating VLAN (without changing its meaning), and
keep compatible with Linux's creating (Exactly the same when
`vlan_qos` is 0).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Inspired by Linux's way, we also create VLAN devices for managing VLAN,
which will become interfaces like `eth0.58`.
QinQ is also supported, we can create VLAN devices above another VLAN
devices, like `eth0.100.101` (or even `eth0.1.2.3.4`, also supported on
Linux).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Disable configuration options that are not needed for MCUboot loader
- Disable floating point and long long support in libc
- Disable libm
- Disable POSIX features: environment variables, message queues, timers
and pthreads
- Disable RAMTEST app to save code space
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
