According RFC793,p72~p73 In states from ESTABLISHED to LASTACK:"If the ACK acks something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return"
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
in the current process, if tcpstate is at TCP_FIN_WAIT_1, TCP_CLOSING,
and TCP_LAST_ACK, and the peer does not reply TCP_ACK, it will be
retransmitted permanently. to avoid continuous occupation of resources,
now when the retransmission equals TCP_MAXRTX, a reset message will be
sent and the conn resources will be reclaimed in tcp_close_work.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
since we added TCP_TXCLOSE and TCP_RXCLOSE, only RST-like exception
flows now trigger TCP_CLOSE events, so replace the remaining
TCP_CLOSE with TCP_ABORT.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
notify the local waiting recv process; otherwise, after the peer TX
is closed, the wait of the recv process will continue to wait.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
shutdown should send TCP_FIN packet.
close should send TCP_RST packet when the data in readahead has not been
read and NEW_DATA has arrived.
send TCP_FIN packet when in other cases.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
after the listener fd is closed, the half-open connections associated
with the listener are not reclaimed. According to the protocol standard,
they should be reclaimed in a timely manner.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
According RFC1122 3.2.2.1, A host SHOULD generate Destination Unreachable messages with code: 2(Protocol Unreachable), when the designated transport protocol is not supported.
Signed-off-by: wenquan1 <wenquan1@xiaomi.com>
When compiling with O2 optimization, the compiler optimizes the code
in a way that causes irq variable to be corrupted. The getipsr()
function reads IPSR into r0, but the subsequent inline assembly that
sets FPSCR also uses r0 without declaring it as clobbered. This causes
the compiler to reuse r0 for the immediate value (0x40000), overwriting
the IRQ number read from IPSR.
The issue manifests as:
- getipsr() correctly reads IPSR (e.g., 0xf for IRQ 15)
- Compiler optimizes and reuses r0 for ARM_FPSCR_LTPSIZE_NONE (0x40000)
- irq variable gets the wrong value 0x40000 instead of actual IRQ number
- This leads to assertion failures in irq_dispatch due to invalid IRQ
Root cause analysis from disassembly:
mrs r0, IPSR ; Read IPSR to r0
mov.w r0, #262144 ; Compiler overwrites r0 with 0x40000!
vmsr fpscr, r0 ; Set FPSCR
str r0, [sp, #4] ; Store corrupted 0x40000 as irq
...
ldr r0, [sp, #4] ; Load corrupted value
bl irq_dispatch ; Call with wrong IRQ number 0x40000
Fix by adding r0 to the clobber list in the inline assembly, which
forces the compiler to save irq value before using r0 for FPSCR setup.
This issue only occurs at O2 optimization level and affects ARMv8-M
architecture with FPU enabled.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Update io_len to 0 when pktlen is 0. otherwise, io_pktlen and io_len will be inconsistent, cause free check failure.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
avoid packet processing delays caused by task switching,
to support those applications that are extremely time-sensitive.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
lfs_fs_size() can return more blocks than block_count during active
writes due to copy-on-write blocks. This caused f_bavail to underflow
to a large positive number. Add clamping to prevent this.
Signed-off-by: Julian Oes <julian@oes.ch>
UDP and PKT will hold the dev lock and conn lock when calling back the
protocol stack from the network dirver. At this time, if the poll_notify
notifies usrsock_server and executes poll_teardown, a conn double lock
will appear. so we changed the lock to a recursive lock
sched_dumpstack
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/Libs/libc/sched/sched_dumpstack.c:71
__assert
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/libs/libc/assert/lib_assert.c:49
nxsem_wait_slow
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/semaphore/sem_wait.c:102 (discriminator 1)
nxmutex_lock
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/include/nuttx/mutex.h:514
udp_pollteardown
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:278
usrsock_rpmsg_poll_setup
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1232
usrsock_rpmsg_poll_cb
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/usrsock/usrsock_rpmsg_server.c:1299
poll_notify
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_poll.c:296
udp_poll_eventhandler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_netpoll.c:105
devif_conn_event
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/devif_callback.c:481
udp_callback
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_callback.c:324
udp_input_conn
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/udp/udp_input.c:150
ipv4_in
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:425
ipv4_input
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/net/devif/ipv4_input.c:533
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
tun_net_receive_tun
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/net/tun.c:574
file_writev_compat
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/fs/vfs/fs_write.c:89
rpmsgdev_write_handler
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/misc/rpmsgdev_server.c:354
rpmsg_virtio_process_rx_buffer
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:256
rpmsg_virtio_rx_worker
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/drivers/rpmsg/rpmsg_virtio.c:291
work_dispatch
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:233
work_thread
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/wqueue/kwork_thread.c:293
nxtask_start
/home/work/ssd1/workspace/MiRTOS-062-dev-system-CI/nuttx/sched/task/task_start.c:99
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
add net_lock in the tcp_callback_cleanup & Set the devif_callback_s of
tcp_callback_s to a two-dimensional pointer.
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Optimize the processing logic of UDP TXDrain, reduce thread switching,
and improve timeliness and CPU consumption.
Signed-off-by: wangchen <wangchen41@xiaomi.com>
use netdev_list_lock to protect all network card traversal, registration,
and deregistration operations.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
the maximum retransmission interval allowed for car projects
cannot exceed 6 seconds, and allows for fixed retransmission intervals.
according to the previous algorithm, the retransmission interval
may be 0.5 * 2 ^ 4 = 8 seconds, which does not meet the requirements.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
CLOSE-WAIT - represents waiting for a connection termination request
from the local user.
TCP A TCP B
1. ESTABLISHED ESTABLISHED
2. (Close)
FIN-WAIT-1 --> <SEQ=100><ACK=300><CTL=FIN,ACK> --> CLOSE-WAIT
3. FIN-WAIT-2 <-- <SEQ=300><ACK=101><CTL=ACK> <-- CLOSE-WAIT
4. (Close)
TIME-WAIT <-- <SEQ=300><ACK=101><CTL=FIN,ACK> <-- LAST-ACK
5. TIME-WAIT --> <SEQ=101><ACK=301><CTL=ACK> --> CLOSED
6. (2 MSL)
CLOSED
in the current state, we can continue to send data until the user
calls shutdown or close, then directly enter the TCP_LAST_ACK state
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
According to RFC768 page 2, length feild is the length in octets of this user datagram including this header and the data.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
Documentation for the NuttX Unit Test Selection (NUTS) app. Includes
information about the configuration options, build dependencies,
currently included test cases and how to extend the test collection with
new unit tests.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
