Align the NuttX open(2) flag constants with the Linux asm-generic
values so that the FUSE wire protocol and other cross-platform
interfaces work without conversion.
All code that used '(flags & O_RDONLY)' as a bitmask check (always 0
now that O_RDONLY=0) has been updated to use '(flags & O_ACCMODE)'
comparisons.
The NUTTX_O_* constants in include/nuttx/fs/hostfs.h are updated to
match, and the sim hostfs open flag mapping is fixed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
O_RDOK and O_WROK are non-standard aliases for O_RDONLY and O_WRONLY
respectively. Having two names for the same flag creates confusion,
especially when aligning the flag values with Linux. Remove the
aliases and replace all uses with the standard O_RDONLY/O_WRONLY.
No functional change — O_RDOK was defined as O_RDONLY and O_WROK as
O_WRONLY, so the replacement is a pure text substitution.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
The internal implementation of `file_mq_receive` did not allow
receiving a message from an interrupt handler. Although it is not
possible to wait for a message in an interrupt context, it is
perfectly possible to retrieve already-existing messages from the
message queue. This commit modifies file_mq_timedreceive_internal
to enable checking the message list and, if no messages exist, it
returns immediately. This enables receiving any existing messages
in an interrupt context.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
1. mainly for long time within critical_section
2. move out memcpy buffer from enter_critical_section()
3. let mq_send() return fail when mq buffer full in ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
In POSIX testcase "open_posix_testsuite/conformance/interfaces/mq_receive/11-2.c", it will return "EPERM" when message queue is not opened for reading, but the standard POSIX specification in URL “https://pubs.opengroup.org/onlinepubs/9699919799/functions/mq_receive.html” requires that "EBADF" be returned.So in this change, i update it.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
1. remove descript management in mqueue, save code size
2. use i_ops instead of i_mqueue to remove the dup logic
Change-Id: Ie88960e50ddcae9c87977c9ad65a45297c663291
Signed-off-by: ligd <liguiding1@xiaomi.com>
PR #488 introduced an error in a file license header in file sched/mqueue/mqueue.h. This commit fixe that error and in the course of doing that, changing the license header to the standard Apache 2.0 header. I am the author and copyright hold of all modified files.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Change all calls to mq_receive() and mq_timedreceive() in the OS to calls to nxmq_receive() and nxmq_timedreceive(), making appropriate changes for differences in return values.
sched/mqueue: Add nxmq_receive() and mxmq_timedreceive() which are functionally equivalent to the standard mq_receive and mq_timedreceive() except that (1) they do not create cancellation points, and (2) the do not modify the application's errno variable.
sched/mqueue: Rename all private static functions for use the nxmq_ vs. mq_ naming.
sched/mqueue: Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_. The mq_ prefix is reserved for standard application interfaces.
