Commit graph

30 commits

Author SHA1 Message Date
Marin Doetterer
b4f04a8560 rtc/ptc85263A: Add handling of stop_enable flag.
On some boards, the PCF85263 RTC does not count between reboots. Due to STOP_ENABLE (register 0x2E), bit=0 = 1, which freezes the RTC counter.

The exact trigger is unknown - not all boards exhibit the issue. The bit is battery-backed and
persists across reboots, so once set (e.g. by a power glitch or undefined hardware state) the
RTC stays frozen until explicitly cleared. The old driver never did this.

Fix: write `0x00` to `STOP_ENABLE` on init, which is the correct reset value per the datasheet.
Fix: set time properly:
	Due to datasheet the set_time should be as follow:
	1. set stop_enable
	2. clear prescaler
	3. set time
	4. clear stop_enable

Signed-off-by: Marin Doetterer <marin@auterion.com>
2026-05-29 01:27:03 +08:00
Xiang Xiao
c47b1e2c5b !sys/types.h: change time_t and clock_t to int64_t to align with other OSes
POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:

  time_t   : uint64_t  -> int64_t
  clock_t  : uint64_t  -> int64_t
  CLOCK_MAX: UINT64_MAX -> INT64_MAX

This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.

Headers updated:
  - include/sys/types.h, include/limits.h, include/nuttx/clock.h
  - include/nuttx/fs/hostfs.h (nuttx_time_t alias)
  - include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}

Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).

Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.

Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
  - arch RTC / oneshot / tickless lowerhalfs:
      arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
           samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
           xmc4
      mips: pic32mz       sparc: bm3803       x86_64: intel64
      risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
           esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
           mpfs_perf
  - drivers: audio/tone, input/aw86225, power/pm/{activity,
           stability}_governor, rpmsg/rpmsg_ping,
           timers/{ds3231,mcp794xx,pcf85263,rx8010},
           wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
  - core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
          libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
          lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
          net/ipfrag, net/tcp/{tcp.h,tcp_timer},
          net/utils/net_snoop, net/mld/mld_query (drop the now-dead
          mld_mrc2mrd helper since signed math handles it directly),
          sched/clock/{clock,clock_initialize},
          sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
          sched/pthread/pthread_create,
          sched/wdog/{wd_gettime,wd_start,wdog.h},
          sched/timer/timer_gettime, sched/mqueue/*

Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
  * drivers/rpmsg/rpmsg_ping.c                       PRIu64 -> PRId64
  * arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
                                          PRIu32 (already wrong) -> PRId64

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2026-05-19 16:21:28 +08:00
Piyush Patle
0dccc8ba21 include/debug.h: Move to include/nuttx/debug.h
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.

A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.

Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
2026-04-07 07:50:06 -03:00
Alin Jerpelea
286d37026c drivers: migrate to SPDX identifier
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2024-11-06 18:02:25 +08:00
Jukka Laitinen
7ec3cad5af drivers/timers/pcf85263.c: Fix compilation
Add the missing semicolons

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-09-06 12:20:57 +08:00
Alin Jerpelea
ccff570e6f drivers: nxstyle fixes
nxstyle fixes to pass the CI.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-04 18:32:27 -08:00
Alin Jerpelea
e5b6305f4a drivers: Author Gregory Nutt: update licenses to Apache
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-03-04 18:32:27 -08:00
Xiang Xiao
e1ecb3e27c libc: Don't define localtime[_r] to macro when CONFIG_LIBC_LOCALTIME not define
since libc++ declare these function in ctime by:
using ::localtime[_r];

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic0bb68b44c0cab838ab7cc34baee2aaa3ca8a9b5
2020-07-19 19:35:21 -07:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Xiang Xiao
1e3f457c9e Remove TIME_EXTENDED option to more conform C standard
Gregory Nutt <gnutt@nuttx.org>

    Run all .c and .h files modified in this PR through nxstyle and correct all coding standard problems.

Xiang Xiao <xiaoxiang@xiaomi.com>

    Remove TIME_EXTENDED option to more conform C standard

    Note: the code/data size increment is small
2020-01-23 08:17:22 -06:00
Gregory Nutt
2761279839 drivers/bch, pipes, timers: Run drivers through tools/nxstyle, correcting as many complaints as possible. 2019-12-06 23:36:33 -06:00
Gregory Nutt
b7f0fbc073 Centralize definitions associated with CONFIG_DEBUG_RTC 2016-06-16 07:39:23 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
69ce24c70c I2C: Remove the setfrequency method from the interface 2016-02-01 16:31:13 -06:00
Gregory Nutt
6ad641888b Add I2C frequency to the i2c_msg_s structure 2016-02-01 14:17:20 -06:00
Gregory Nutt
f9053182d3 I2C: Remove setaddress method 2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998 I2C: Eliminate the I2C_WRITE and I2C_READ macros 2016-02-01 08:57:22 -06:00
Gregory Nutt
10000841a8 The I2C_TRANSFER method is no longer optional 2016-01-31 14:16:05 -06:00
Gregory Nutt
3a781a2d3f Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:16 -06:00
Gregory Nutt
d4a53ee131 I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:26:16 -06:00
Gregory Nutt
a2e1ece873 RTC: Handle RTC failures. If mktime is called with garbage, it may crash 2015-12-21 14:39:40 -06:00
Gregory Nutt
a696b807fb PCF65263: Correct readback verification of seconds register 2015-12-21 14:00:25 -06:00
Gregory Nutt
8914400750 PCF85163: Correct I2C address 2015-11-21 07:14:36 -06:00
Gregory Nutt
294950ea3d PCF85263: Need to clear the 100ths of second register when setting the time 2015-11-20 17:39:41 -06:00
Gregory Nutt
38c9d42e21 drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC 2015-11-20 17:36:10 -06:00