ice40_endwrite() computes how many dummy SPI bytes to clock out after
the bitstream to finish FPGA configuration with:
for (size_t i = 0; i < ICE40_SPI_FINAL_CLK_CYCLES + 7 / 8; i++)
`/` binds tighter than `+` in C, so this parses as
ICE40_SPI_FINAL_CLK_CYCLES + (7 / 8) = 160 + 0 = 160, i.e. the "+ 7 / 8"
is a silent no-op. The macro name and the classic `(n + 7) / 8`
ceiling-division idiom (used elsewhere in embedded code to convert a
bit/cycle count into a byte count) make clear the intent was to send
ceil(ICE40_SPI_FINAL_CLK_CYCLES / 8) = 20 bytes (160 SPI clock cycles,
matching the macro name). Instead the unmodified code sends 160 bytes,
i.e. 1280 clock cycles - 8x more than intended.
Fix by parenthesizing the ceiling-division: (ICE40_SPI_FINAL_CLK_CYCLES
+ 7) / 8, which evaluates to 20, restoring the intended 160-clock-cycle
finalization sequence.
Fixes#19367
Assisted-by: Claude Code:claude-sonnet-5
Signed-off-by: yi chen <94xhn1@gmail.com>
Permissions (Part 2)
Description:
In kernel builds, any unprivileged process running on the NuttX
device can open /dev/efuse and attempt to read/write fuse content.
Reading the fuses may provide valuable information to an attacker
controlling the user process. The write operation, in extreme cases
where the fuse blocks are not locked, may brick the device.
DISCLAIMER: I tried to be strict with the settings, better to relax them
later if it's needed.
This is part of https://github.com/apache/nuttx/issues/19410
See https://github.com/apache/nuttx/issues/19410
Compiles ok.
Signed-off-by: Catalin Visinescu <catalin_visinescu@yahoo.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Copyright and Author information is missing from the License and was filled with
commit authorship
Signed-off-by: Jakub Janousek <janouja9@fel.cvut.cz>
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
