This commit updates the common-source integration for Xtensa-based
Espressif devices (ESP32, ESP32-S2, and ESP32-S3). This is part of a larger
common-source update split by architecture for better maintainability.
Major components updated:
- IRQ allocator refactoring with intr_alloc integration
- Common-source drivers (GPIO, RMT, I2C, SPI, UART, etc.)
- Espressif components upgrade to release/master.b-test
- Peripheral drivers (ADC, PWM, LEDC, MCPWM, PCNT, Temperature Sensor, etc.)
- Wireless adapters (Wi-Fi and BLE)
- esp_timer migration to the common-source path for Xtensa devices
- Common-source power management implementation (auto-sleep and wakeup paths)
- Board defconfigs for all Xtensa Espressif boards
- SMP support improvements for ESP32-S3
- Critical section handling improvements
Key architectural changes:
- IRQ Allocator: The new interrupt allocator enables multiple mapping
options from interrupt sources to CPU interrupts, providing flexibility
required by modern peripherals. Although this introduces breaking changes
to the interrupt handling API, the required ARCH_MINIMAL_VECTORTABLE
Kconfig option is explicitly checked during startup to ensure proper
configuration. This validation prevents runtime issues from configuration
mismatches.
- Xtensa-specific interrupt handling via esp_xtensa_intr.c providing
NuttX-native implementations of xt_ints_on/off and interrupt handlers,
avoiding conflicts with NuttX's core Xtensa macros.
- Timer/RTC unification: ESP32/ESP32-S2/ESP32-S3 move from chip-specific
RTC/RT-timer code to common-source Espressif integration, including
esp_timer_adapter/esp_rtc paths and the required bringup/defconfig updates.
- Power management consolidation: Xtensa PM follows the common-source
implementation, including common-source auto-sleep behavior, UART/Wi-Fi
wakeup coordination, and tickless-safe sleep flow compatibility.
Note: This is a large commit to maintain bisectability. Breaking the
changes into smaller commits would result in non-building intermediate
states across the common-source infrastructure update.
Tested configurations:
- All defconfigs were tested, including `ostest`.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
- Added esp32s3_board_spislavedev.c with board-level SPI slave logic
- Added esp32s3_board_spislavedev.h public header in common/include
- Updated Make.defs to include the new source when CONFIG_SPI_SLAVE_DRIVER=y
- Adding spislv board config to esp32s3-devkit
- Adding documentation of esp32s3 devkit spi slv
- Fixing path include in esp32s3_board_spislavedev.c
- Fixing relative path in the header of esp32s3_board_spislavedev.h
- Removing neasted check in Make.defs, consistency reasons
This provides initial support for SPI slave device initialization
on ESP32-S3 boards, making the feature available under conditional
build configuration.
Signed-off-by: Thiago Finelon <thiago.sfinelon@gmail.com>
Adds adc defconfig and board support for: esp32-devkitc, esp32s2-saola-1 and esp32s3-devkit.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Update the wireless symbols from ESP32S3_* to ESPRESSIF_* for using common layer.
Remove ESP32S3 specific WiFi files and edit build system to use common layer.
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
1) Wi-Fi driver libs from Espressif ESP-IDF release/v5.0;
2) Station mode only;
3) WPA2-PSK and WPA3-SAE enabled;
Not yet supported (WIP):
- SoftAP mode;
- 802.11k, 802.11v and 802.11R;
- Power Save mode;
- BLE Coexistance;
