Toolchain.defs adds --fixed-r10 to CFLAGS under CONFIG_PIC, but nearly
every board Make.defs includes that file and then assigns
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) ...
with ':=', which discards it. 266 of the 269 ARM board files assign
CFLAGS that way; the remaining three delegate to a shared makefile that
does the same thing.
The flag is what keeps the base firmware from allocating r10, the
register a PIC module reaches its own data through. Losing it is silent
and the symptom is remote from the cause: the build succeeds, and only a
callback from base firmware into module code -- qsort() with a module
comparison function is the standard case -- misbehaves, reading its data
through a register the firmware has since felt free to reuse.
Adding it to ARCHCFLAGS puts it on the far side of that ':=', which
re-expands ARCHCFLAGS, so every board picks it up with no board changes
at all.
A module is the other side of the --fixed-r10 contract: it gets r10 via
-mpic-register=r10, and GCC rejects both on one command line with
"unable to use 'r10' for PIC register". Every ARM board carried the
same three lines to set that up:
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
They move to arch/arm/src/common/Toolchain.defs, which also filters
--fixed-r10 back out of CPICFLAGS, CXXPICFLAGS, CELFFLAGS and
CXXELFFLAGS in one place instead of each board having to know about the
interaction. ARCHPICFLAGS uses '?=' and the derived flags use deferred
'=', so a board can still override or append after including the file,
and CFLAGS is whatever the board finally set it to.
Two boards keep a definition because they genuinely differ: am67 adds
-ffixed-r10 and tiva conditionally adds -mno-pic-data-is-text-relative.
tlsr82 previously appended -fpic to an unset variable, so only -fpic
ever reached its compiler; it now inherits the standard set, verified
against tc32-elf-gcc 4.5.1.tc32-elf-1.5 (Telink TC32 v2.0), whose
ARM-derived backend honors -msingle-pic-base and -mpic-register=r10.
The mps2, mps3, qemu-armv7a, qemu-armv7r, fvp and mcx-nxxx families
referenced ARCHPICFLAGS without ever defining it, so their CPICFLAGS
carried no PIC flags at all; they get the standard set too.
Also adds the missing space in
CXXELFFLAGS = $(CXXFLAGS)-fvisibility=hidden -mlong-calls
which ran the last token of CXXFLAGS into -fvisibility=hidden, yielding
a single malformed token such as -DNDEBUG-fvisibility=hidden.
Also exempts the pre-existing "*.siz" gsize comment in Toolchain.defs
from codespell, which reads "siz" as a misspelling and fires for any
patch touching the file, since checkpatch scans whole files rather than
changed lines.
Before, with CONFIG_PIC=y: CFLAGS has --fixed-r10: NO
After: CFLAGS has --fixed-r10: YES
CPICFLAGS/CELFFLAGS: filtered out
Assisted-by: Claude Code:claude-opus-4-8
Assisted-by: Claude Code:claude-fable-5
Signed-off-by: Marco Casaroli <marco.casaroli@gmail.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Correct duplicate "is is" word found in 181 files throughout the
codebase.
In most cases "is is" was changed to "is", but in contexts like
"MCU is is sleep mode" it was corrected to "MCU in sleep mode".
Also fixes a "the the" typo in net/inet/inet_sockif.c.
This is a pure style/documentation fix that improves code readability.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Remove unnecessary parentheses around case labels in switch statements
for power management callback functions. This fixes checkpatch style
violations for case statement formatting.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This commit cleans up redundant header file includes throughout the codebase.
The changes include:
- Removing duplicate #include directives that were present in the same file
- Consolidating includes that were split across multiple lines unnecessarily
- Removing unused includes that were no longer needed
- Fixing some formatting issues with includes
The changes improve code organization and maintainability by:
- Reducing unnecessary dependencies
- Making include dependencies more explicit
- Following consistent include patterns
- Removing dead code
No functional changes are made - this is purely a code cleanup commit.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Old upstream from @acassis:
d97227eddd/nuttx/configs/efm32gg-pnbfano/include/board.h
chip/efm32_clockconfig.c:860:24: error: 'BOARD_SWOPORT_LOCATION' undeclared (first use in this function);
did you mean 'BOARD_UART0_ROUTE_LOCATION'?
860 | regval |= ((uint32_t)BOARD_SWOPORT_LOCATION <<
| ^~~~~~~~~~~~~~~~~~~~~~
| BOARD_UART0_ROUTE_LOCATION
chip/efm32_clockconfig.c:860:24: note: each undeclared identifier is reported only once for each function it appears in
chip/efm32_clockconfig.c:866:20: error: 'BOARD_GPIO_SWOPORT' undeclared (first use in this function)
866 | efm32_configgpio(BOARD_GPIO_SWOPORT);
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@lixiang.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
- migrated /README are removed from /boards
- there are a lot of READMEs that should be further converted to rst.
At the moment they are moved to Documentation/platforms and included in rst files
When I try to set priorities in certain programs, such as init_priority(HIGH_PRIORITY), I've noticed that during linking, there's no guarantee that the programs will be compiled in the sequence I've specified based on priority. This has led to some runtime errors in my program.
I realized that in the ld file, when initializing dynamic arrays, there's no assurance of initializing init_array.* before init_array. This has resulted in runtime errors in the program. Consequently, I've rearranged the init_array.* in the ld file of NuttX to be placed before init_array and added a SORT operation to init_array.* to ensure accurate initialization based on priorities during linking.
replace *(.init_array .init_array.*) with KEEP(*(.init_array .init_array.*)).
The KEEP statement within a linker script will instruct the linker to keep the specified section, even if no symbols inside it are referenced. This statement is used within the SECTIONS section of the linker script. This becomes relevant when garbage collection is performed at link time, enabled by passing the --gc-sections switch to the linker. The KEEP statement instructs the linker to use the specified section as a root node when creating a dependency graph, looking for unused sections. Essentially forcing the section to be marked as used.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
since the related code was removed by:
commit 4d5a964f29
Author: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
Date: Tue Feb 23 18:04:13 2021 +0800
net: unify socket into file descriptor
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
In the current compilation environment, the recursive assignment(=) for compile
flags will be delayed until every file is actually need to be compile.
For example:
--------------------------------------------------------------------------------
arch/arm/src/Makefile:
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)$(ARCH_SUBDIR)}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched}
CPPFLAGS += $(INCLUDES) $(EXTRAFLAGS)
CFLAGS += $(INCLUDES) $(EXTRAFLAGS)
CXXFLAGS += $(INCLUDES) $(EXTRAFLAGS)
AFLAGS += $(INCLUDES) $(EXTRAFLAGS)
--------------------------------------------------------------------------------
All compilation options will be included recursively,
which will be delayed until the compilation options are actually used:
tools/Config.mk:
--------------------------------------------------------------------------------
define COMPILE
@echo "CC: $1"
$(Q) $(CC) -c $(CFLAGS) $($(strip $1)_CFLAGS) $1 -o $2
endef
--------------------------------------------------------------------------------
All compile flags to be reexecuted $(INCDIR) as long as one file needs to be compiled,
but in fact, the compilation options have not changed in the current directory.
So the we recommand to change the syntax of assignment
From
Recursive (=)
To
Simple (:=)
In this way, we can ensure that all compilation options are expanded only once and reducing repeated works.
Signed-off-by: chao.an <anchao@xiaomi.com>
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
Change the preallocated message and descriptor from 32/24 to 4.
The total size is reduce from 1892 to 532
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I79d199465daef678986868f773876289859f42fc
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
1.It make sense to let Toolchain.defs give the default value
2.The board can still change if the default isn't suitable
3.Avoid the same definition spread more than 200 Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
Make.defs under board folder can still overwrite the default as needed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1c300a8ace4b54d475ef8d398661ed65ca273a2e
so all boards support uClibc++/libc++ automatically
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ibe6fafbec57f7acb26ea6188a3e9923ea82295c5
