Gregory Nutt
|
a585669ccc
|
Update ChangeLog
|
2015-02-09 16:37:01 -06:00 |
|
Gregory Nutt
|
f3427cb32a
|
mtd/ramtron.c: Table of parts is not terminated properly if CONFIG_RAMTRON_FRAM_NON_JEDEC is not defined
|
2015-02-09 16:35:58 -06:00 |
|
Gregory Nutt
|
67bc1d465b
|
Update ChangeLog
|
2015-02-09 16:18:24 -06:00 |
|
Gregory Nutt
|
f0d318c124
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
Gregory Nutt
|
4f9998b4a8
|
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
|
2015-02-09 16:12:11 -06:00 |
|
Gregory Nutt
|
3080ed6549
|
Update ChangeLog
|
2015-02-09 15:30:09 -06:00 |
|
Gregory Nutt
|
44f09a084c
|
SAMA5D4-EK: CONFIG_NET_NOINTS is now enabled in the nsh and ipv6 configurations.
|
2015-02-09 15:27:14 -06:00 |
|
Gregory Nutt
|
96589ad16a
|
SAMA5D4-EK: CONFIG_NET_NOINTS is now enabled in the nsh and ipv6 configurations.
|
2015-02-09 15:27:14 -06:00 |
|
Gregory Nutt
|
08677542dc
|
SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level.
|
2015-02-09 15:26:05 -06:00 |
|
Gregory Nutt
|
25067a58e8
|
SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level.
|
2015-02-09 15:26:05 -06:00 |
|
Gregory Nutt
|
25f187d754
|
ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts.
|
2015-02-09 15:24:31 -06:00 |
|
Gregory Nutt
|
ac2a1f0bb1
|
ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts.
|
2015-02-09 15:24:31 -06:00 |
|
Gregory Nutt
|
fa580e17cf
|
Oops... Conditioned on IPv4 wheren IPv6 was intended
|
2015-02-09 14:16:32 -06:00 |
|
Gregory Nutt
|
94d3c68013
|
Oops... Conditioned on IPv4 wheren IPv6 was intended
|
2015-02-09 14:16:32 -06:00 |
|
Gregory Nutt
|
987715e8a3
|
Fix IPv4-dependend debug output
|
2015-02-09 13:18:31 -06:00 |
|
Gregory Nutt
|
3384274087
|
Fix IPv4-dependend debug output
|
2015-02-09 13:18:31 -06:00 |
|
Gregory Nutt
|
b285162e79
|
Fix some warnings in audio code causing by fixing the prototypes of mq_send() and mq_receive()
|
2015-02-09 12:50:04 -06:00 |
|
Gregory Nutt
|
8a28f7fc5d
|
Networkin: Fix an error in network driver skeleton file
|
2015-02-09 12:49:09 -06:00 |
|
Gregory Nutt
|
7c22824981
|
Oop.. forgot a semicolon in a preceding commit
|
2015-02-09 11:16:01 -06:00 |
|
Gregory Nutt
|
b78a9fc290
|
Update ChangeLog
|
2015-02-09 10:53:22 -06:00 |
|
Gregory Nutt
|
62666a030b
|
SAMA5D4-EK: Add a configuration for testing IPv6
|
2015-02-09 10:51:05 -06:00 |
|
Gregory Nutt
|
fc04eec306
|
SAMA5D4-EK: Add a configuration for testing IPv6
|
2015-02-09 10:51:05 -06:00 |
|
Gregory Nutt
|
09b356c497
|
SAMA5D4 EMAC: Add support for Multicast address matching and IPv6
|
2015-02-09 10:50:38 -06:00 |
|
Gregory Nutt
|
66e456161f
|
SAMA5D4 EMAC: Add support for Multicast address matching and IPv6
|
2015-02-09 10:50:38 -06:00 |
|
Gregory Nutt
|
3b61f2c734
|
Update ChangeLog
|
2015-02-09 08:53:52 -06:00 |
|
Gregory Nutt
|
26e1327462
|
execl(): Fix bad logic in counting the number of arguments. This could never have worked. Noted by Pierre-noel Bouteville
|
2015-02-09 08:53:00 -06:00 |
|
Gregory Nutt
|
e845d73818
|
Update TODO
|
2015-02-09 08:51:27 -06:00 |
|
Gregory Nutt
|
7403121729
|
Update ChangeLog
|
2015-02-09 08:37:28 -06:00 |
|
Gregory Nutt
|
e8b4f474d3
|
Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing).
|
2015-02-09 08:34:52 -06:00 |
|
Gregory Nutt
|
0195049165
|
Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing).
|
2015-02-09 08:34:52 -06:00 |
|
Gregory Nutt
|
67f0563fad
|
Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread.
|
2015-02-09 08:33:29 -06:00 |
|
Gregory Nutt
|
ef2d314235
|
Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread.
|
2015-02-09 08:33:29 -06:00 |
|
Gregory Nutt
|
559f1ef825
|
Networking: Clean up and consolidate some clunky stuff by adding new net_timedwait() function
|
2015-02-09 07:50:10 -06:00 |
|
Gregory Nutt
|
f33a9f0626
|
Correct a attribution in a comment
|
2015-02-09 07:27:43 -06:00 |
|
Gregory Nutt
|
e218f620ac
|
Correct a attribution in a comment
|
2015-02-09 07:27:43 -06:00 |
|
Gregory Nutt
|
2ae737f906
|
Update ChangeLog
|
2015-02-08 06:58:23 -06:00 |
|
Gregory Nutt
|
8bac6b71ce
|
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
|
2015-02-08 06:53:24 -06:00 |
|
Gregory Nutt
|
3465cb6138
|
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
|
2015-02-08 06:53:24 -06:00 |
|
Gregory Nutt
|
b2ed249b42
|
STM32 SPI: Clean-up asymmetric configuration of SPI6
|
2015-02-07 18:59:06 -06:00 |
|
Gregory Nutt
|
93ed9dc8d3
|
STM32 SPI: Clean-up asymmetric configuration of SPI6
|
2015-02-07 18:59:06 -06:00 |
|
Gregory Nutt
|
7ac36f7de6
|
Update ChangeLog
|
2015-02-07 14:02:08 -06:00 |
|
Gregory Nutt
|
706f01b8a2
|
STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane.
|
2015-02-07 13:59:45 -06:00 |
|
Gregory Nutt
|
6f335dc6c6
|
STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane.
|
2015-02-07 13:59:45 -06:00 |
|
Gregory Nutt
|
e9e9892646
|
Updated Tiva ADC files
|
2015-02-06 16:56:12 -06:00 |
|
Gregory Nutt
|
9318121175
|
Updated Tiva ADC files
|
2015-02-06 16:56:12 -06:00 |
|
Gregory Nutt
|
8f4bbdd057
|
Updated Tiva ADC files
|
2015-02-06 16:56:12 -06:00 |
|
Gregory Nutt
|
1928feafca
|
Networking: Fix some errors that crept in with IPv6
|
2015-02-06 13:34:19 -06:00 |
|
Gregory Nutt
|
f1a524e9ee
|
Remove nutts/tools/astyle.sh
|
2015-02-06 12:48:01 -06:00 |
|
Gregory Nutt
|
252802d1cd
|
Remove inclusion of some un-necessary header files.
|
2015-02-06 08:50:53 -06:00 |
|
Gregory Nutt
|
3e6705b526
|
IPv6: Separate function that converts prefix lengths to a netmask
|
2015-02-06 08:11:09 -06:00 |
|