Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
4b738ba7cc
SAMV7 QSPI: Fix some compiler problems when SPI debug is enabled
2015-08-31 08:57:30 -06:00
Gregory Nutt
409262a8ef
Update ChangeLog/sub-module version
2015-08-31 08:41:17 -06:00
Gregory Nutt
70f1a49fbe
arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)).
2015-08-31 08:40:02 -06:00
Gregory Nutt
ed750f3600
ST25FL1: Changes after review of ST24FL1 clocking
2015-08-29 18:54:20 -06:00
Gregory Nutt
b6515bbd4d
SAMV71 QSPI: Changes resulting removing of clocking
2015-08-29 18:53:27 -06:00
Gregory Nutt
d6b0a8fe72
ST25FL1 driver is code complete
2015-08-29 15:58:54 -06:00
Gregory Nutt
b94eef2f19
SAMV71 QSPI: Driver is code complete
2015-08-29 15:57:20 -06:00
Gregory Nutt
bfc3c98e12
Move MTD ioctls commands from include/nuttx/fs/fs.h to include/nuttx/mtd/mtd.h. Add commands to protect and unprotect memory
2015-08-29 10:54:38 -06:00
Gregory Nutt
3877cb09d9
Trivial renaming
2015-08-29 10:04:36 -06:00
Gregory Nutt
b887d39d2e
SAMV7 QSPI: Add DMA transfer support
2015-08-29 10:02:59 -06:00
Gregory Nutt
e392471dc2
QSPI interface: Add support for dual and quad read transfers; Add support for dummy read cycles.
2015-08-28 12:00:06 -06:00
Gregory Nutt
0b1bd46e24
SAMV71 QSPI: Add support for dual and quad data transfers and dummy read cycles
2015-08-28 11:58:19 -06:00
Gregory Nutt
70bdf682af
QSPI: Add support for data vs command transfer
2015-08-28 10:15:08 -06:00
Gregory Nutt
3e0affba86
SAMV71 QSPI: Add support for non-DMA memory transfers
2015-08-28 10:13:46 -06:00
Gregory Nutt
361e35a7be
QSPI: Make changes to interface to better work with the SAMV71
2015-08-27 14:16:51 -06:00
Gregory Nutt
8aefb9d139
SAMV71 QSPI: Redesign some functions to better matched new interface definition
2015-08-27 14:15:23 -06:00
Gregory Nutt
d06b709652
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-27 12:12:24 -06:00
Gregory Nutt
71bbe5b48d
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-27 12:08:04 -06:00
Gregory Nutt
3bcdb218ff
Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on
2015-08-27 08:39:17 -06:00
Gregory Nutt
926f3aa9af
Update some comments
2015-08-27 08:19:26 -06:00
Gregory Nutt
7936819fcc
ST25FL1: Flesh out more initialization logic
2015-08-26 14:16:45 -06:00
Gregory Nutt
45a6f79eeb
SAMV71 QSPI: Flesh out most of the initialization logic
2015-08-26 14:15:40 -06:00
Gregory Nutt
768aba20ad
SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different
2015-08-25 15:23:59 -06:00
Gregory Nutt
4d040d572a
Networking: Eliminate recursion from the local loopback driver
2015-08-24 15:16:03 -06:00
Gregory Nutt
fa9522da41
Missed one file in last commit
2015-08-24 14:30:58 -06:00
Gregory Nutt
d99e217906
Urefresh submodule
2015-08-24 14:26:12 -06:00
Gregory Nutt
01cfe8c315
Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically
2015-08-24 14:25:49 -06:00
Gregory Nutt
0732914d09
Merged in david_s5/arch/upstream_446_clock (pull request #9 )
...
Upstream_446_clock
2015-08-24 14:13:51 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
706d50d97a
Merge branch 'master' of bitbucket.org:nuttx/arch
2015-08-24 13:46:19 -06:00
Gregory Nutt
c9603b27c0
sim: Add logic to initialize the local loopback device is so configured
2015-08-24 13:46:05 -06:00
David Sidrane
98ce2b2912
Fixed Mask and made configuration macros consistant
2015-08-24 08:56:24 -10:00
David Sidrane
b95c642a88
Added Kconfig Enable Support for SAI and I2S PLL
2015-08-24 08:55:45 -10:00
Gregory Nutt
47bab42498
Update submodules
2015-08-23 17:21:34 -06:00
Gregory Nutt
bddc4dbd6a
LPC17: Fix RAM vector table alignment for the LPC17 family. The ARMv7-M TRM only requires 128-byte alignment for vector tables; the LPC17, however, requires 256 byte alignment
2015-08-23 17:17:14 -06:00
Gregory Nutt
64cff54894
Upate submodules
2015-08-22 10:16:51 -06:00
Gregory Nutt
065f2d6057
SAMV7 USBHS DCD: Add logic to detect high speed mode; use DEBUGASSERT to check input parameters
2015-08-22 08:58:38 -06:00
David Sidrane
6559c8994a
Remove the word NOT - that was used to test the fix.
2015-08-21 18:51:28 -06:00
David Sidrane
390c777a2a
Removed the word NOT - that was used to test the fix.
2015-08-21 18:40:20 -06:00
Pavel Pisa
23035ca68d
[PATCH] gethostbyname(): correct returned address format when DNS is used. The hostent.h_addr_list should point to raw in_addr or in6_addr as defined in the standard. Original implementation used that
...
for numeric addresses but for DNS lookup returned pointer to whole sockaddr_in or sockaddr_in6.
getaddrinfo() should be preferred in a long term perspective. Return of complete addresses from the lookup would be better in such case but it requires significant changes anyway - multiple addresses support and most probably dynamic memory allocation which is bad for many RT applications. So gethostbyname() is sufficient for most applications now.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
2015-08-21 18:33:03 -06:00
Pavel Pisa
2fafe1c817
arch/arm/src/lpc17: Actually implement options to use external SDRAM and or SRAM for the heap. From Pavel Pisa
2015-08-21 18:28:59 -06:00
Gregory Nutt
4c0d36740d
Some of the last review chnages were still in the editor
2015-08-21 18:25:10 -06:00
Gregory Nutt
9a32e907df
Trivial, cosmetic changes from review of merge
2015-08-21 18:22:57 -06:00
Gregory Nutt
4e347080e6
Update comments in Kconfig file
2015-08-21 18:15:09 -06:00
Gregory Nutt
16c5be9767
Merged in david_s5/arch/upstream_446 (pull request #7 )
...
Upstream_446
2015-08-21 18:11:05 -06:00
David Sidrane
9d64050d68
Added Changes to support for the new USB OTG controller for F446 register map
2015-08-21 13:57:08 -10:00
David Sidrane
7c96342c63
Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions
2015-08-21 13:55:06 -10:00
David Sidrane
5d1ff3f7e1
Use read modify write on PLL and CFG registers
2015-08-21 13:22:09 -10:00
David Sidrane
1c746edceb
Added PLL P constants
2015-08-21 13:20:16 -10:00
