Gregory Nutt
96cee3709a
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28 )
2015-11-01 16:51:32 -06:00
Lok Tep
08224b8606
after debug
2015-11-01 23:11:37 +01:00
Paul A. Patience
4c2c989838
STM32 PWM: Add support for multiple output channels
2015-11-01 17:11:35 -05:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
pnb
d1b4d55343
pwm duty can by zero
2015-11-01 14:45:12 +01:00
Gregory Nutt
d6d834be5b
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #25 )
...
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 09:07:28 -06:00
pnb
0090cfe6d4
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 16:00:24 +01:00
pnb
668c56b1a6
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:42:00 +01:00
v01d
79fad2843a
lpc4337: WIP
2015-10-30 20:15:18 -03:00
Lok Tep
3a4b0e12a1
tickless
2015-10-30 17:37:40 +01:00
Gregory Nutt
a7a405df00
Update ChangeLog
2015-10-23 07:16:42 +08:00
Gregory Nutt
22ea50464f
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23 )
...
Enhance STM32 QEncoder driver with configurable input filters
2015-10-22 18:28:22 +08:00
Gregory Nutt
e3d44ace60
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22 )
...
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
2015-10-22 18:26:53 +08:00
Gregory Nutt
04705d14df
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21 )
...
Add EXTI definitions for STM32F373
2015-10-22 18:21:45 +08:00
Gregory Nutt
2b078150e8
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20 )
...
Add support for STM32F429N (TFBGA) chip
2015-10-22 18:19:52 +08:00
Gregory Nutt
c87c50df14
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19 )
...
Fix setup of PLLSAI in STM32F4xx.
2015-10-22 18:17:21 +08:00
Lok Tep
b91fbed6a6
address 7->8
2015-10-21 17:35:52 +02:00
Marten Svanfeldt
3299a31b27
Enhance STM32 QEncoder driver with configurable input filters
...
Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can
potentially be insufficient in noisy environments, or too slow for really
fast encoder sources, so let the user set it from the Kconfig file
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 11:06:01 +08:00
Marten Svanfeldt
fdb484f24e
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:56:36 +08:00
Marten Svanfeldt
d1c7e5b5fb
Fix setup of PLLSAI in STM32F4xx.
...
To correctly setup the PLLSAI register it is required to first mask out
the old PLL divisor and multiplier factors before setting new ones
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:33:39 +08:00
Marten Svanfeldt
4d879a33ee
Add support for STM32F429N (TFBGA) chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:30:57 +08:00
Marten Svanfeldt
54b333dcd3
Add EXTI definitions for STM32F373
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:22:41 +08:00
Gregory Nutt
00af71dd78
Update ChangeLog
2015-10-20 06:02:10 +08:00
Frank Benkert
4ac10f53d7
Reconfigure System I/O when using USART1
2015-10-20 05:58:34 +08:00
Gregory Nutt
081fa3e0ec
Update submodules
2015-10-18 08:15:39 +08:00
Frank Benkert
78669f20f2
SAMV7 MCAN: ix switched assertion check for TSEG1 and TSEG2 in CANIOC_SET_BITTIMING
2015-10-18 08:14:10 +08:00
Gregory Nutt
bf99b4e207
Update submodules
2015-10-14 07:15:00 -06:00
Gregory Nutt
c340185cb3
arch/sim: Fix spacing/alignment issues
2015-10-14 07:14:28 -06:00
Gregory Nutt
613798027e
Add a button upper/lower half driver
2015-10-12 14:29:43 -06:00
Gregory Nutt
4a46a872bd
arch/mips: fix some spacing and alignment issues
2015-10-12 08:18:03 -06:00
Gregory Nutt
796d52b3e1
Fix a typo introduced with last commits
2015-10-10 12:24:31 -06:00
Gregory Nutt
e675ddb813
TMPFS: Reported block size is now configurable
2015-10-09 16:57:48 -06:00
Paul A. Patience
08175bef58
STM32 PWM: Add ifdef for STM32F30XX
2015-10-09 17:20:42 -04:00
Gregory Nutt
a326b79b25
Merged in paulpatience/nuttx-arch (pull request #17 )
...
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 14:13:02 -06:00
Paul A. Patience
253e112b4a
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 13:47:22 -04:00
Gregory Nutt
d359a5be13
TMPFS: Code complete, but not yet functional
2015-10-09 11:02:59 -06:00
Max Kriegler
a20a61caef
STM32 F4: Correct pin mapping for TIM12 Channel 2
2015-10-09 10:32:46 -06:00
Gregory Nutt
11a8a01462
TMPFS: Add mkdir and rmdir logic
2015-10-08 20:35:41 -06:00
Gregory Nutt
d90f597a05
More spacing/alignment issues
2015-10-08 19:31:58 -06:00
Gregory Nutt
ef5f3dcff4
SAM3/4 RTC: Fix a bungled change from a recent commit
2015-10-08 19:21:35 -06:00
Lok Tep
5983019a45
merge from nuttx
2015-10-08 22:57:34 +02:00
Gregory Nutt
06cd5b2fcc
mm, audio, crypto, graphics: Fix various spacing/alignment issues
2015-10-08 09:10:22 -06:00
Gregory Nutt
beb060d422
Yet more spacing issues
2015-10-07 20:24:19 -06:00
Gregory Nutt
79d554939e
sched/: Fix some spacing issues
2015-10-07 19:59:14 -06:00
Gregory Nutt
a92842906f
STM32: Fix a search-and-replace error in previous commit
2015-10-07 19:58:05 -06:00
