OpenAMP already change virtqueue_get_available_buffer() to
virtqueue_get_first_avail_buffer(), so update them
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
new virtio_alloc_buf() return int type, so add virtio_malloc_buf()
for the convenience of use.
And replace all virtio_alloc_buf() to virtio_malloc_buf() in NuttX.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
1. In cfi_write_unalign(): Add additional check to ensure nbytes is
at least bankwidth size before skipping unaligned start handling.
This prevents incorrect behavior when writing small amounts of
data that are less than bankwidth.
2. In cfi_write(): Align down the write size to bankwidth boundary
when the remaining nbytes is less than the buffer write size.
This ensures the buffer write operation always works with properly
aligned data size, preventing write failures.))
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
using Desired frequency offset from nominal frequency in
parts per billion(ppb) to adjust frequency
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This patch adds a dummy PTP clock driver implementation that provides
a software-based PTP clock for testing and development purposes.
Key changes include:
1. Dummy PTP clock driver implementation:
- Added drivers/timers/ptp_clock_dummy.c
- Provides software-based PTP clock using system monotonic clock
- Implements all required lower-half driver operations
2. Lower-half driver operations:
- adjfine: Frequency adjustment (stores adjustment value)
- adjtime: Time offset adjustment (applies delta to base time)
- gettime: Returns current PTP clock time
- settime: Sets PTP clock time
- getcaps: Reports clock capabilities (1 billion PPB max adjustment)
- getcrosststamp: Provides system/device cross-timestamp
3. Driver initialization:
- Added ptp_clock_dummy_init() in drivers/drivers_initialize.c
- Auto-registration under CONFIG_PTP_CLOCK_DUMMY configuration
- Creates /dev/ptp0 character device node
4. Build system integration:
- Added CONFIG_PTP_CLOCK_DUMMY Kconfig option (depends on PTP_CLOCK)
- Updated CMakeLists.txt and Make.defs
- Added include/nuttx/timers/ptp_clock_dummy.h header
5. Implementation details:
- Uses clock_gettime(CLOCK_MONOTONIC) as time base
- Tracks time offset and frequency adjustment internally
- Suitable for testing PTP clock applications without hardware
This dummy driver enables development and testing of PTP clock applications
on platforms without dedicated PTP hardware support.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
This patch introduces the foundational PTP (Precision Time Protocol) clock
driver framework for NuttX, enabling precise time synchronization support
based on IEEE 1588 standard.
Key changes include:
1. New PTP clock driver infrastructure:
- Added drivers/timers/ptp_clock.c implementing upper-half driver
- Created include/nuttx/timers/ptp_clock.h with PTP clock interfaces
- Implemented upper/lower half driver architecture for hardware abstraction
2. Core functionality:
- Clock time get/set operations (gettime, settime)
- Frequency adjustment support (adjtime, adjfine)
- Phase adjustment capabilities
- System-device cross-timestamping for precise synchronization
3. IOCTL commands:
- PTP_CLOCK_SETTIME/GETTIME for time manipulation
- PTP_CLOCK_GETRES for resolution queries
- PTP_CLOCK_ADJTIME for time adjustment
- PTP_CLOCK_GETCAPS for capability queries
- PTP_SYS_OFFSET* for system offset measurements
4. Supporting structures:
- struct ptp_lowerhalf_s: lower-half driver interface
- struct ptp_clock_caps: clock capabilities descriptor
- struct ptp_sys_offset: system time offset measurement
- Added timex structures in include/sys/timex.h for ADJ_* operations
5. Build system integration:
- Added CONFIG_PTP_CLOCK Kconfig option
- Updated CMakeLists.txt and Make.defs
- Added PTPCLK debug macros in include/debug.h
This framework provides the base for PTP clock implementations, allowing
hardware-specific drivers to register and provide precise time services
through a standardized interface.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
avoid packet processing delays caused by task switching,
to support those applications that are extremely time-sensitive.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The value returned by sizeof(struct note_start_s) is larger
than the actual memory footprint of struct note_start_s.
This causes the length calculated in sched_note_start to be larger
than the actual memory size,which further leads to out-of-bounds reads in note_common.
Signed-off-by: guohao15 <guohao15@xiaomi.com>
The loopback network driver sending task is placed in the LPWORK queue, which may result in delayed scheduling when the CPU usage reaches 100%, leading to the timely sending of cached messages from the loopback network driver and causing issues with post waitsem being too late.we decied to set loopback sending task to the HPWORK queue.
Signed-off-by: wangchen <wangchen41@xiaomi.com>
avoid packet processing delays caused by task switching,
to support those applications that are extremely time-sensitive.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Add MTD driver for Winbond W25N series SPI NAND flash.
Currently supports W25N01GV (1Gbit/128MB).
Features:
- Standard SPI interface with configurable frequency (up to 104 MHz)
- Hardware ECC enabled by default
- Block erase with sleep-based wait (releases SPI bus)
- Page read/write with busy-wait for fast operations
Limitations:
- No bad block management (BBM). Factory bad blocks and runtime bad
blocks are not tracked.
- No bad block table (BBT) scanning at initialization.
- No Quad SPI support (standard SPI only).
- No access to spare area (64 bytes/page) or OTP region.
Tested using:
- Board with STM32H743
- W25N01GV on SPI at 96 MHz with DMA enabled
- Flash mounted using littlefs
- Tested using sdbench:
- Sequential write speed of 1760 KB/s
- Sequential read speed of 4900 KB/s
Signed-off-by: Julian Oes <julian@oes.ch>
Add handling for GPIOC_SETDEBOUNCE to set GPIO pin debounce duration.
Add handling for GPIOC_SETMASK to enable/disable GPIO interrupt mask.
Signed-off-by: chenzihan1 <chenzihan1@xiaomi.com>
In order to reduce code duplication, use the eeprom/spi_xx25xx
driver within mtd/at25ee.
The eeprom/xxx.h includes have been merged into eeprom/eeprom.h, to
provide a common include file like mtd/mtd.h.
Signed-off-by: Antoine Juckler <6445757+ajuckler@users.noreply.github.com>
Changed the DRIVERS_VIRTIO_INPUT dependencies from 'depends on' to 'select'
for INPUT_TOUCHSCREEN, INPUT_KEYBOARD, and INPUT_MOUSE options. This ensures
that when DRIVERS_VIRTIO_INPUT is enabled, all required input subsystems are
automatically selected, fixing the issue where mouse device nodes were not
being created properly.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
When the setinterface interface is called, it indicates that the underlying
USB link has been successfully established. At this point, the status of the
network card needs to be updated to RUNNING by calling the netdev_carrier_on
interface. It is similar to the logic after a Wi-Fi network card is
connected to a hotspot. Otherwise, an incorrect network card status may
cause packets to fail to be successfully sent.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Move mutex lock before checking flist to prevent race condition where
events could be lost when occurring simultaneously with service opening.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
O_NONBLOCK open mode was broken since
https://github.com/apache/nuttx/pull/17360
MIN() comapres signed value (int) with unsigned value (size_t) which causes
an unexpected return value when ret is negative
Signed-off-by: raiden00pl <raiden00@railab.me>
Upperhalf supports multiple working modes at the same time,
which is specified by NIC when register
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Remove the previously supported polling mode. If necessary in the
future, switch to a new solution for implementation.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
