Add standalone host PBKDF2-HMAC-SHA256 mkpasswd, board_romfs_mkpasswd.sh,
and promptpasswd.sh with confirm-password support. Integrate ROMFS passwd
generation in Board.mk and CMake. Drop TEA key checks from passwd_keys.mk.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
Add a board-agnostic GPIO driver for Realtek Ameba chips, exposing pins
through the NuttX GPIO (ioexpander) upper half at /dev/gpioN.
- arch/arm/src/common/ameba/ameba_gpio.{c,h}: the shared driver, sitting
directly on the SDK fwlib register layer. The fwlib GPIO API it calls
resolves at link time from the on-chip ROM symbol table, except
GPIO_INTStatusGet/ClearEdge which are not in ROM and are compiled in
from fwlib ram_common/ameba_gpio.c (that object also carries GPIO_Init,
harmlessly overriding the equivalent ROM copy). Pin interrupts are
dispatched NuttX-natively: the port's NVIC vector is owned by NuttX
via irq_attach, and the ISR reads and clears status through the fwlib
GPIO_INTStatus* helpers.
- The driver keeps nothing IC-specific: the port count, the per-port
NVIC vectors and the RCC gate bits come from a per-chip
<ameba_gpio_chip.h> resolved on the include path, so bringing up a new
Ameba chip only adds that header, not a change to the shared driver.
- arch/arm/src/common/ameba/Kconfig: a shared "Ameba Peripheral Support"
menu with the AMEBA_GPIO option, sourced by each Ameba chip's Kconfig so
it is reused across ICs (RTL8721Dx, RTL8720F, ...).
- arch/arm/src/rtl8721dx: provide ameba_gpio_chip.h, wire the driver into
both the Make/Kconfig and CMake builds, and compile the fwlib
ameba_gpio.c register layer into libameba_fwlib for the RTL8721Dx.
- boards/arm/rtl8721dx/pke8721daf: board pin table (rtl8721dx_gpio.c),
bring-up registration, and a standalone gpio defconfig.
- Documentation: describe the gpio configuration and pin encoding.
tools/nxstyle: whitelist the Ameba "GPIO_" SDK ROM symbol prefix (alongside
the existing FLASH_/IPC_/... Ameba prefixes) so the vendor GPIO API's mixed-case
identifiers do not trip nxstyle, matching how the other Ameba SDK prefixes are
handled.
Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: dechao_gong <dechao_gong@realsil.com.cn>
Ignores Python defconfig from esp32p4-tab5 board.
Python builds are excluded due to its long build time.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
Building Zig applications on sim:x86_64 with Zig 0.13.0 fails because
the generated target "x86_64-freestanding-sysv" is not recognized by
Zig. Introduce a Zig-specific ABI mapping that translates "sysv" to
"gnu" without affecting other toolchains.
After correcting the target ABI, linking still fails due to unresolved
references to __zig_probe_stack. Add -fcompiler-rt so Zig includes the
required compiler runtime during linking.
Verified on sim:nsh with CONFIG_EXAMPLES_HELLO_ZIG=y:
nsh> hello_zig
[sim]: Hello, Zig!
Fixes#19475
Signed-off-by: Ansh Rai <anshrai331@gmail.com>
When porting external projects to NuttX using uncrustify could help
to convert "alien code" (maybe we are the aliens) to NuttX coding
style.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Assisted-by: Hermes Agent using Deepseek-4-pro
Each ameba IC pins its asdk (arm-none-eabi) version in the SDK
(component/soc/<soc>/project/CMakeLists.txt): RTL8720F needs 12.3.1 while
RTL8721Dx needs 10.3.1. Both share the same arm-none-eabi triple and differ
only by install directory. The make + cmake setup previously read only the
global default, so the NuttX objects for an IC pinning a newer asdk were built
with the wrong compiler (not the one its SDK archives were built with).
Resolve the version per-IC from a single helper (ameba_asdk_version.sh, keyed
by the SoC) used by every caller:
- toolchain.mk / ameba_board.mk: make picks the right asdk automatically
(it already knows the SoC), no user action.
- ameba_fetch_toolchain.sh: fetches the version the SoC pins.
- tools/ameba/env.sh: takes an optional board (`. tools/ameba/env.sh
<board>`) so cmake, which locks the compiler at project() time, gets the
matching asdk on PATH before it probes. No board -> the global default.
- ameba_sdk.cmake: fail configure with a fix-it message if the on-PATH
compiler is not the version this IC needs (e.g. a stale env from another
board), instead of silently mis-compiling.
Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: raul_chen <raul_chen@realsil.com.cn>
Both Ameba WHC boards (pke8721daf, rtl8720f_evb) previously built only via the
make build; the board CMakeLists fell back to a FATAL_ERROR. Wire up the full
vendor-SDK machinery for CMake so `cmake --build` produces the same flashable
nuttx.bin as make, with no change to any shared/arch-common file:
- tools/ameba/env.sh: source it once before cmake. It resolves/auto-fetches
the ameba-rtos SDK + its pinned asdk toolchain (reusing the same helper
scripts the make build uses) and puts the toolchain on PATH, so cmake's
normal compiler probe finds it -- exactly like every other NuttX board's
toolchain. No per-chip hook is added to the shared arch Toolchain.cmake.
- common/ameba/cmake/ameba_sdk.cmake: resolve AMEBA_SDK + asdk dir from that
environment (fall back to the in-tree checkout) and sanity-check the
compiler; included by each arch chip CMakeLists before its SDK-relative
source lists.
- common/ameba/cmake/ameba_board.cmake: the shared mechanism -- autoconf,
libameba_fwlib.a / libameba_wifi.a compiled with the isolated SDK include
set, the image2 linker script, the image2 link flags + EXTRA_LIBS, nuttx.bin
packaging and the flash target. Per-IC inputs are set by each arch chip
CMakeLists.
- common/ameba/tools/{ameba_gen_ldscript,ameba_package,ameba_flash}.sh:
shared shell steps used by both the make and cmake paths so the two produce
identical output; tools/ameba/Config.mk now flashes via ameba_flash.sh too.
- Fix a latent rtl8720f CMakeLists source list bug (ameba_ipc.c was missing
for the WiFi / flash-fs configs).
The make build is unchanged (it still auto-fetches everything, so sourcing
env.sh is optional there and required only for cmake). Verified on hardware:
both boards build, flash and boot with WiFi over the CMake path.
Assisted-by: Claude Code:claude-opus-4-8
Signed-off-by: raul_chen <raul_chen@realsil.com.cn>
The NP and bootloader images are built from the vendored ameba-rtos SDK.
Rework how that sub-build is configured and driven:
- Materialize the SDK menuconfig once, guarded by a stamp (SDK revision +
board overlay). A no-change rebuild no longer rewrites the SDK .config, so
the SDK stops reconfiguring and recompiling most of the NP image every time;
only the AP-driven "noused" file is regenerated. (ameba_sdk_config.sh)
- Configure the SDK from a two-tier prj.conf-style overlay per board:
ameba_sdk.conf (user-editable) layered under ameba_sdk_force.conf (forced
options such as CONFIG_SHELL=n, always applied last and re-applied after an
edit), so options that must stay fixed cannot be overridden.
- Add "make ameba_menuconfig": edit the SDK options in the SDK's own native
menuconfig UI and save the diff back to the board overlay.
- Silence -Wint-conversion for the vendored SDK sources (both the NuttX fwlib
compile and the SDK NP/boot build): the SDK passes NULL to irq_register()'s
u32 "Data" argument in many places; the warning is suppressed for vendor
code instead of editing every call site.
Signed-off-by: raul_chen <raul_chen@realsil.com.cn>
New RISC-V chip port for the GigaDevice GD32VW55x (Nuclei N307, Wi-Fi 6
and BLE 5.3 combo), with the GD32VW553K-START board.
Core:
- ECLIC interrupt controller, clock tree (160 MHz / 40 MHz HXTAL),
64-bit machine timer, serial (USART0/UART1/UART2) and RTC.
- The instruction cache must be enabled in head.S or the UART drops
characters under load; the mask ROM uses the first 0x200 bytes of SRAM
so the image is linked at 0x20000200; the RTC needs PMU_CTL0.BKPWEN or
the register writes are silently discarded.
- The ECLIC only auto-clears the interrupt pending bit in hardware-vectored
mode, so the trap dispatch clears it for edge-triggered sources or they
re-fire forever (level-triggered peripherals clear their own).
Peripherals: DMA (8 channels), GPIO + EXTI, SPI (optional DMA), I2C0/I2C1
(the new STM32-v2-style IP, not the GD32F4 one), ADC, PWM and input
capture on the timers, both watchdogs, PROGMEM, TRNG and CRC. All use
the standard NuttX lower-half interfaces and direct register access, not
the vendor SPL. Three user LEDs (GPIOC), and a software reset through the
Nuclei SysTimer.
Internal flash: it is a system-in-package NOR die behind the real-time
decryption block, so it is not programmed through the FMC registers -- the
driver goes through the mask ROM API (rom_flash_*), the same way the
vendor code does. PROGMEM can be mounted as LittleFS; the region sits
below the Wi-Fi NVDS and must not overlap it.
Wi-Fi (wlan0), station and softAP:
- The MAC/PHY, RF and WPA supplicant are linked as prebuilt BSD-3
libraries. They are RTOS-agnostic, so the OS binding is a sys_* facade
on NuttX primitives (gdwifi/wrapper_nuttx.c). Critical sections mask by
ECLIC priority threshold, not by disabling every interrupt, or the MAC
misses its microsecond deadlines.
- The lwIP stack of the SDK is not used: the interface is a
netdev_lowerhalf driver driven by the standard tools (wapi, ifup, renew,
ping, dhcpd). EAPOL is handed to the supplicant instead of the IP
stack. The lowerhalf "priority" field is the work-queue id (HPWORK/
LPWORK), not a task priority -- a wrong value makes receive() never run
and every packet is dropped.
- The vendor gives the radio 32 KB of shared SRAM as an extra heap; this
needs CONFIG_MM_REGIONS >= 2 or the kernel silently drops the region.
- The DHCP client needs CONFIG_NETUTILS_DHCPC_BOOTP_FLAGS=0x8000 so the
server answers the OFFER by broadcast.
- softAP (wapi master mode -> wifi_management_ap_start): the single-VIF
firmware does station or AP at a time. Use WPA2, not WPA3: the SAE
handshake is deep on the stack and overflows the elliptic-curve crypto
with the default task stacks, so the Wi-Fi configs raise
CONFIG_INIT_STACKSIZE/DEFAULT_TASK_STACKSIZE.
Vendor SDK: cloned by the build at "context" time, pinned to a validated
commit and patched in place -- so CI can build with nothing preinstalled,
the same pattern as esp-hal-3rdparty. The prebuilt libraries are built
for the hard-float ilp32f ABI.
BLE 5.3, marked EXPERIMENTAL and off by default: the prebuilt libble is an
all-in-one controller plus RivieraWaves host (GAP/GATT/SMP inside the blob)
with no HCI transport, so the port drives the vendor host directly
(ble_adp_*, ble_adv_*, ble_gap_*) instead of registering a bt_driver_s.
The SDK's radio interrupt handlers must be attached to the NuttX IRQ table
(they are reached through the ECLIC hardware vector table in the vendor
build); attaching also keeps --gc-sections from dropping them. It ships
with no configuration; enabling it advertises as "NuttX", connectable.
Boards: gd32vw553k-start with nsh, wapi, sta_softap, periph and littlefs
configurations, and the board added to the CI build list.
Tested on hardware (GD32VW553K-START): NSH, the peripheral drivers
(TRNG entropy and the LEDs exercised), LittleFS (write, read, survives a
reboot), the full Wi-Fi station path (scan, WPA2, DHCP, ping to the
internet), the softAP (a client associates with WPA2, gets an address
from the board's DHCP server, and pings the board), and BLE (advertises as
"NuttX"; a central connects and enumerates the GATT database).
Assisted-by: Claude Opus 4.8
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
fix
Error: Refusing to load formula px4/px4/genromfs from untrusted tap px4/px4.
Run `brew trust --formula px4/px4/genromfs` or `brew trust px4/px4` to trust it.
Error: Process completed with exit code 1.
Homebrew 6.0+ refuses to load formulae from third-party taps unless they
are explicitly trusted ("Refusing to load formula ... from untrusted tap").
Trust each tap non-interactively before installing from it. Without this,
`brew install` aborts before pouring any package (including ccache).
`brew trust` only exists on Homebrew 6.0+; guard it so older versions,
which don't gate untrusted taps, skip it silently.
50161b1f09/Tools/setup/macos.sh (L54-L64)
Signed-off-by: simbit18 <simbit18@gmail.com>
Rework the RTL8721Dx / RTL8720F flashable-image handling to match the common
NuttX convention:
- Name the packed application image nuttx.bin (was app.bin) and leave only it
plus the map files in the top-level build directory; the prebuilt bootloader
boot.bin stays in the board prebuilt/ directory. Drop the redundant per-core
and OTA image copies from the top-level directory.
- Read the boot and application flash offsets from the SDK flash layout
(platform_autoconf.h) instead of hardcoding them, and write boot.bin and
nuttx.bin each at its own offset. A flash-layout change is then tracked
automatically and no offsets are entered by hand.
- Update the board documentation to match.
Signed-off-by: raul_chen <raul_chen@realsil.com.cn>
scan_dir() checked name_len before assigning it. Directory entries already compute and validate strlen(a_dirent->d_name) before allocating the dir item, while the root path passed to scan_dir() is not encoded as a directory entry name.
Remove the stale pre-opendir check so scan_dir() no longer branches on an uninitialized local variable.
Generated-by: OpenAI Codex
Signed-off-by: aineoae86-sys <ai.neo.ae86@gmail.com>
Support NUTTX_ROMFS_PASSWD_PASSWORD via update_romfs_password.sh for
configs that enable ROMFS passwd without a defconfig password (sim/login
CI). Enable RANDOMIZE_KEYS in sim/login defconfig. Update mkpasswd.c
header, platform docs, and the mkpasswd_autogen guide.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
Remove implicit default credentials and add build-time validation.
Add check_passwd_keys.sh and gen_passwd_keys.sh; run key setup via
passwd_keys.mk before config.h is generated. Mirror the same logic in
cmake/nuttx_add_romfs.cmake for CMake builds.
BREAKING CHANGE: Builds with CONFIG_BOARD_ETC_ROMFS_PASSWD_ENABLE=y now
require an explicit admin password and non-default TEA keys. The
Kconfig default password "Administrator" and default TEA keys are no
longer accepted. Fix: run make menuconfig, set Admin password under
Board Selection -> Auto-generate /etc/passwd, enable random TEA keys or
set CONFIG_FSUTILS_PASSWD_KEY1..4 manually, and use NSH login with
Encrypted password file verification.
Signed-off-by: Abhishek Mishra <mishra.abhishek2808@gmail.com>
Added a Mixed case exclusion for MQTTErrors defined in
apps/netutils/mqttc/MQTT-C/include/mqtt.h
Signed-off-by: Mihai Pacuraru <mpacuraru@protonmail.com>
This file does not build with minor modifications due to nxstyle issues.
Adding symbols to the white_content_list to address_this.
Testing: "gcc -o nxstyle nxstyle.c" builds fine.
Signed-off-by: Catalin Visinescu <catalin_visinescu@yahoo.com>
Move the stm32l1 sources, headers and boards into arch/arm/src/stm32l1,
arch/arm/include/stm32l1 and boards/arm/stm32l1, then finalize the split:
source each split family directly in arch/arm/Kconfig and boards/Kconfig and
remove the now-empty combined arch/arm/src/stm32 and boards/arm/stm32 trees.
BREAKING CHANGE: The legacy STM32 architecture and board paths were split into
stm32f1, stm32l1, stm32f2, stm32f3, stm32f4, and stm32g4 directories.
Out-of-tree boards must move from stm32 to the matching split family.
Signed-off-by: raiden00pl <raiden00@railab.me>
Even after installing the ftdi library on CI it doesn't work to
compile the sim:ft2232h_gpio, so remove it from CI test.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
This commit adds a defconfig for enabling the NuttX Web Panel on
ESP32-P4. It also create entries to automatically call the Web
panel application after system's boot up.
The `webpanel` is removed from regular ESP32-P4 CI testing because
it ships with Python and that would overload CI infrastructure.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Add support for building Rust apps on the NuttX simulator running on
Intel (x86_64) macOS.
- Add tools/x86_64-unknown-nuttx-macho.json, a Mach-O Rust target for
the macOS sim.
- Rust.defs: select the new x86_64 macho target for sim on macOS.
- boards/sim/.../Make.defs: keep the default PIC/PIE-compatible code
generation on macOS by not adding -fno-pic/-mcmodel=medium.
- sethost.sh: enable CONFIG_HOST_X86_64 for non-arm64 hosts.
Signed-off-by: Shoji Tokunaga <toku@mac.com>
The Micro XRCE-DDS Client custom-transport API expects user
callbacks with prototypes of the form
bool open_cb (struct uxrCustomTransport *transport);
size_t read_cb(struct uxrCustomTransport *transport, ...);
The struct tag is fixed by the upstream public header
<uxr/client/profile/transport/custom/custom_transport.h> and
cannot be renamed. nxstyle currently flags every callback
signature in apps/system/microros/transport with 'Mixed case
identifier found'.
Add the 'uxrCustom' prefix to g_white_prefix, following the same
pattern used for the ROS 2 message type names added in
commit bc3a2596c8 ("tools/nxstyle: Whitelist ROS 2 message type
identifiers.").
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
Move the NuttX-specific Rust target specification files from apps/tools
to nuttx/tools so files with the same purpose are kept in one place.
The existing aarch64 Mach-O target spec for macOS simulator builds
already lives under nuttx/tools. Keeping the remaining NuttX Rust target
specs there as well makes the layout consistent and lets both Make and
CMake builds refer to target specs from the NuttX tree.
Signed-off-by: Shoji Tokunaga <toku@mac.com>
The ROS 2 C client API generates symbols via rosidl token-pasting
macros. Each message type ends up with a name of the form
<pkg>__msg__<Type>, and the bare type token (Int32, Float64, ...)
appears in user code as an argument to ROSIDL_GET_MSG_TYPE_SUPPORT().
Neither form can be renamed without breaking the public API.
Add the ROS 2 standard message package prefixes (std_msgs,
geometry_msgs, sensor_msgs, nav_msgs, builtin_interfaces,
rcl_interfaces) and the rosidl scalar type names (Int8/16/32/64,
UInt8/16/32/64, Float32/64) to g_white_prefix so nxstyle does not
flag the resulting mixed-case identifiers in apps that consume
micro-ROS via apps/system/microros.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
This commit is needed to get PR #18951 passing on CI test.
I think this USB Device could be used in the future to do
real hardware tests, including automated tests on our CI.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Add a custom aarch64 Mach-O Rust target for macOS sim builds and use it
instead of an Apple Darwin Rust target. This keeps Rust cfg values aligned
with NuttX while producing Mach-O objects required by the simulator link.
Also align sim host handling for aarch64 Linux by detecting `aarch64` as
`HOST_ARM64` and avoiding x86-specific `-mcmodel` and `-no-pie` options
on ARM64 hosts.
Signed-off-by: Shoji Tokunaga <toku@mac.com>
The repo bitbucket.org/nuttx/tools is no longer available. This PR changes it to to github.com/patacongo/tools, as explained in https://github.com/apache/nuttx/pull/18890. This PR updates the URL in Dockerfile and Docs.
Signed-off-by: Lup Yuen Lee <luppy@appkaki.com>
Remove `esp32p4-function-ev-board:python` defconfig from being
built for the regular CI pipelines to avoid overloading it.
Signed-off-by: Tiago Medicci Serrano <tiago.medicci@espressif.com>
Adds a build_path argument for when CMake builds are used.
This solves a problem when building the nxdiag tool with CMake.
Signed-off-by: Filipe Cavalcanti <filipe.cavalcanti@espressif.com>
For boards b-g431b-esc1/nsh, nucleo-g431kb/nsh and nucleo-g431rb/nsh,
the `.data` section of nuttx.elf overflows the 128 KB flash region by a
few hundred bytes on default GNU EABI builds:
arm-none-eabi-ld: nuttx section `.data' will not fit in region `flash'
arm-none-eabi-ld: region `flash' overflowed by 296 bytes
Enabling CONFIG_LTO_FULL=y in the corresponding defconfigs brings flash
usage back below the 128 KB limit (~93%).
Additionally, fix arch/arm/src/cmake/gcc.cmake so that when LTO is
enabled it always uses the gcc-ar / gcc-nm / gcc-ranlib wrappers, not
just when CONFIG_ARM_TOOLCHAIN_GNU_EABI is also set. CI tooling (via
tools/testbuild.sh) configures cmake first, then flips the toolchain
choice in .config with kconfig-tweak before running `cmake --build`.
With the previous "ARM_TOOLCHAIN_GNU_EABI && !LTO_NONE" guard the
regen step would switch to plain `ar` for the .a files, even though the
linker driver picked at configure time is still arm-none-eabi-g++ and
the object files contain GCC LTO IR. The result was a flood of
"undefined reference to `printf' / `free' / `puts' ..." link errors
when running tools/testbuild.sh -A -N -R on the *_CLANG variants.
Now that we are inside gcc.cmake the toolchain is unambiguously GCC,
so dropping the redundant CONFIG_ARM_TOOLCHAIN_GNU_EABI conjunct keeps
the LTO-aware ar wrappers in place across kconfig-tweak toolchain
switches.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Introduce minimal chip support for the STMicro STM32N6 family
(Cortex-M55, ARMv8.1-M with TrustZone and FPU), sufficient to bring
up an NSH console over USART1.
Scope (deliberately minimal first drop):
- Chip selector ARCH_CHIP_STM32N6 wired into arch/arm/Kconfig and
chip-name mapping ("stm32n6").
- Sub-Kconfig under arch/arm/src/stm32n6 with the STM32N657X0 chip
selector and a single user-selectable USART (USART1).
- Boot path: stm32_start with a naked dispatcher that clears the
boot-ROM MSPLIM/PSPLIM stack limits before any compiler-emitted
prologue, then runs vector relocation and SRAM-only heap init.
The chip runs entirely in the Secure state; SAU is left in its
reset configuration.
- PLL1-based clock tree fed from HSI64 targeting 200 MHz CPU, with
USART1 kernel-clock routed to HSI for a predictable BRR that is
independent of any later clock change.
- Low-level USART driver with full serial framework support.
stm32_serial.c is adapted from arch/arm/src/stm32h5/stm32_serial.c
(sibling ARMv8-M Mainline port with the same USART IP), stripped
of DMA-RX, LPUART, the per-USART2..5 plumbing, RS-485 driver-enable,
TIOCSINVERT/SWAP and HALFDUPLEX paths.
- SysTick system timer.
- GPIO, PWR and RCC helpers.
TrustZone, MPU, I/D-cache and Helium (MVE) are left disabled to
minimise bring-up surface; these will be added in follow-up patches
alongside the drivers that need them.
Signed-off-by: ImBonkers <samuelnlinden@pm.me>
Fixes#16151. Compares .config state before and after kconfig-mconf and triggers 'make clean' if the configuration was modified to prevent orphaned object files.
Signed-off-by: Agnimitra sasaru <158492301+HyphenAlpha456@users.noreply.github.com>
When checking the first line of a block, the returned value is
incremented by one.
This commit updates doc to explain why.
Signed-off-by: Jiri Vlasak <jvlasak@elektroline.cz>
The goal is to only execute recipes when there is an actual change in
the prerequisites.
There are several issues which cause the nuttx binary target to be
re-made every time the top level make is run.
1. Previously the target nuttx$(EXEEXT), was used, but make resolved
this in the relative directory make -C $(ARCH_SRC), and couldn’t find
it (need an absolute path: `$(TOPDIR)/..).
2. The .tmp prerequisite for nuttx was always deleted
3. libboard's recipe had a sub-make which may or may not update that
target. This was a phony target, and was therefore always considered out
of date.
These issues were causing the nuttx recipe to be run every make, which
was hiding some missing prerequisites:
1. the .config is a prerequisite for the .tmp target
2. libapps.a (and other linklibs) are pre-requisites for nuttx
Changes:
The changes are only in the build system, and only for arm.
Track nuttx$(EXEEXT) via vpath so Make knows when it's already up to
date without an explicit path. Add $(TOPDIR)/.config as a dependency
to the linker script preprocessing so config changes trigger
re-preprocessing.
Keep the .tmp linker script on disk (clean already removes it) so
timestamp-based dependency checking works across builds. These .tmp
files need to be added to the gitignore or the CI will complain.
Use FORCE pattern for board/libboard to ensure it's always checked
but use the actual library file as the link dependency so nuttx is
only re-linked when library content changes. Add staging libs as
dependency to nuttx link rule so changed app libs trigger re-link.
Signed-off-by: Liam Hickey <williamhickey@geotab.com>
Three `export VAR ?= $(shell ...)` assignments cause GNU make to
re-run the embedded ${shell ...} every time the variable is exported
to a recipe's environment. That spawns `tools/incdir` and
`tools/define` once per recipe, serialised through the master make
thread, which adds per recipe overhead to multi-job builds.
Wrap each with `ifeq ($(origin VAR),undefined)` + `:=` so the shell
call runs once at parse time while preserving the override semantics
of `?=`.
Measured impact on a 20-core build host is a ~26% speedup of wall
time.
Signed-off-by: Daniel Fanache <dan@rts.ro>
