Logic provided by board_app_initialize is removed due to the removal of
BOARDIOC_INIT boardctl command. Logic inside board_late_initialize is to
be used and is identical.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
BREAKING: In an effort to simplify NuttX initialization, NSH_ARCHINIT is
removed. board_app_initialize is also removed. BOARD_LATE_INITIALIZE now
performs all board initialization logic, and is by default enabled. All
references to these symbols are removed. BOARDIOC_INIT remains, but will
result in -ENOTTY when called. It is to be removed in a later commit.
Quick fix: Boards relying on NSH_ARCHINIT should now enable
CONFIG_BOARD_LATE_INITIALIZE instead. If the application needs
fine-grained control over board initialization from userspace, the logic
performed by BOARDIOC_INIT may be copied to the board_finalinitialize
function and used instead via BOARDIOC_FINALINIT. All
board_app_initialize logic provided by NuttX is now moved to
board_late_initialize, and the same should be done for out-of-tree
boards.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
Add dedicated ostest and coremark defconfigs for nucleo-f412zg.
The ostest config keeps the existing NSH-oriented board setup and
adds the runtime self-test application, while the coremark config
boots directly into the benchmark with an -O3 build profile.
Both configurations were verified with GNU Make and CMake/Ninja
using Arm GNU Toolchain 15.2.Rel1 on macOS arm64.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
This adds a kernel-level performance profiler for the VFS.
By enabling CONFIG_FS_PROFILER, the core VFS system calls
(file_read, file_write, file_open, and file_close) are
instrumented to track high-resolution execution times using
clock_systime_timespec() seamlessly.
The collected statistics are exposed dynamically via a new
procfs node at /proc/fs/profile, allowing CI regression
testing without needing external debugging tools.
Signed-off-by: Sumit6307 <sumitkesar6307@gmail.com>
Adds a configuration that combines the `nimble` example with a SMARTFS
file system configured in the chip's flash.
Signed-off-by: Matteo Golin <matteo.golin@gmail.com>
* Initial experimental / work in progress implementation.
* New board name is esp32s3-ws-lcd128.
* Supports Kconfig delectable w/wo touch variants (lcd gpios difference).
* IMU QMI8658 bringups is put into esp32s3/common/src to share with other
boards. Pin defines are located at <board>include/board.h and referenced
with `#include <arch/board/board.h>`.
* Supported configurations: nsh, ostest, coremark, touch-lvgl, notouch-lvgl,
imu-qmi8658, watchdog.
* Does not have touch panel driver yet.
* Created board documentation. Added sphinx inline cross-references.
* TODO: Fix SPI GC9A01A LCD pixel format colors.
* TODO: Create I2C CST816S touch panel driver.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
Prefer mounting /tmp with tmpfs in the SIM default rc.sysinit when
CONFIG_FS_TMPFS is enabled, and keep the FAT RAMDISK path as a
fallback for configurations that only enable CONFIG_FS_FAT.
Signed-off-by: Arjav Patel <arjav1528@gmail.com>
Enable USART3 support for STM32F412 and use it as the default NUCLEO-F412ZG nsh console path.
The ST-LINK virtual COM port on this board is wired to USART3 on PD8/PD9. Restore USART2 to its header-pin routing, switch the nsh defconfig to USART3, and update the board documentation to match the shipped solder-bridge configuration described in issue #17722.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
Align _etbss in the linker script so (_etbss - _stdata) matches the
compiler's aligned TLS block size.
Fix ostest failure for CONFIG_SCHED_THREAD_LOCAL=y
Signed-off-by: raiden00pl <raiden00@railab.me>
Add board support for on-chip bxCAN: stm32_can.c registers /dev/can0 via stm32_caninitialize() when CONFIG_STM32_CAN_CHARDRIVER is set; stm32_cansock.c calls stm32_cansockinitialize() for the socket-CAN path when CONFIG_STM32_CAN_SOCKET is set.
Signed-off-by: Alexey Matveev <tippet@yandex.ru>
Add dedicated Spresense defconfigs for ostest, coremark and\ngetprime so the board has focused test and benchmark entry\npoints for these workloads.\n\nThis keeps the change scoped to new board configurations and\nfollows the existing Spresense baseline settings for the new\ntargets.
Signed-off-by: aviralgarg05 <gargaviral99@gmail.com>
