rndis on spresense
* arch/arm/src/cxd56xx: Fix ep0 out packet handling in cxd56_usbdev.c
This change fixes to handle ep0 out packet which exceeds EP0_MAXSIZE.
For example, 76 bytes of out packet is sent from rndis host during
rndis negotiation and finally the packet is split into two out packets
(64 bytes out packet + 12 bytes out packet). To handle these packets,
actual ep0reqlen is stored during ep0 out setup stage, and if all
out packets are received, it dispatches to cxd56_ep0setup(), otherwise,
it sets up the internal USB DMA to receive remaining out packets.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* configs/spresense: Add support for rndis configuration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
configs: Fix mac address settings for rndis
Recently CONFIG_NETINIT_MACADDR_2 and CONFIG_NETINIT_MACADDR_1
were newly introduced instead of CONFIG_NETINIT_MACADDR.
This PR conforms to this change.
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
nuttx/arch/z80/src: To properly follow the coding standard, the z80 architecture common should up_mmuinit should be called z80_mmu_initialize.
nuttx/arch/z80/src: To properly follow the coding standard, the z80 architecture common should up_loweserialinit should be called z80_lowserial_initialize.
configs/z80sim/src/z80_serial.c: Remove unused function up_earlyserialinit()
nuttx/arch/z80/src: To properly follow the coding standard, the z80 architecture common should up_serialinit should be called z80_serial_initialize.
nuttx/arch/z80/src: To properly follow the coding standard, the z80 architecture common should up_doirq should be called z80_doirq.
arch/z80/src/common: up_addregion() must be prototyped in nuttx/mm/mm.h, not up_internal.h
configs/makerlisp/src/ez80_spi.c: Add hooks needed by SPI driver. Move SPI MMC/SD chip selected configuration from ez80_lowinit.c to here as it done in other NuttX architectures. This enables support for multiple devices on the SPI bus.
Squashed commit of the following:
configs/makerlisp: Update comments about use of serial console.
configs/makerlisp: Add LED support, remove vestiges of button support (the board has no user buttons). Add support for SPI-based MMC/SD card slot.
arch/z80/src/ez80: Fix some link problems.
libs/libc/syslog/lib_syslog.c: The ZDS-II toolchain does not declare va_coy in stdarg.h. I think that the use of va_copy in vsyslog() is no necessary.
configs/makerlisp: Initial configuration directories cloned from ez80f910200zco with little more than naming changes.
ez80: Fixing a few more compile problems. I am afraid that the 5.3.0 compiler it too buggy to use.
ez80: Additional build-related fixed.
eZ80: Updating to use the newest ZDSII 5.3.0 toolchain.
Squashed commit of the following:
configs/: Add . = ALIGN(4); before every .data section
configs/: Add . = ALIGN(4); before every ARM.extab section
configs/: Add . = ALIGN(4); before every definition of __exidx_start
configs/: Add . = ALIGN(4); before every .init_section.
configs/: Convert TABs to spaces in all ld linker scripts. This just makes things easier to modify with scripts because the files are more consistent.
Improvements for STM32 PWM
arch/arm/src/stm32/stm32_pwm: add support for all PWM modes
arch/arm/src/stm32/stm32_pwm: add interface to change PWM mode
arch/arm/src/stm32/stm32_pwm: refactor pwm_mode_configure()
arch/arm/src/stm32/stm32_pwm: STM32_PWM_CHANx corresponds to the timer channel and STM32_PWM_OUTx corresponds to the timer channel output
arch/arm/src/stm32/stm32_pwm: add CHAN5 and CHAN6 to PWM_TIMx_NCHANNELS
arch/arm/src/stm32/stm32_pwm: calculate the PWM_TIMx_NCHANNELS if CONFIG_STM32_PWM_MULTICHAN is selected
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
arch/arm: Rename include/stm32f0l0 and src/stm32f0l0 to stm32f0l0g0.
Change all occurrences of lower-case stm32f0l0 to stm32f0l0g0.
Change all occurrences of upper-case STM32F0L0 to STM32F0L0G0.
