When loading a zoneinfo file fails, parse a non-colon-prefixed TZ value
as a POSIX timezone string. Treat a successful tzparse() result as
success while preserving the leading-colon file-only behavior.
Assisted-by: Codex:gpt-5.6 Sol
Signed-off-by: hanzhijian <hanzhijian@zepp.com>
This adds 3 configuration options for the lib_strftime, which can be
used to save flash memory when all the formatters are not needed by an
embedded application.
There is always a minimal set of formatters supported:
"%a, %b/%h, %d, %H, %m, %M, %S, %Y, %%". To add on top of that one can
specify:
- LIBC_STRFTIME_C_STANDARD_FORMATS : All ISO-C conversion specifiers
- LIBC_STRFTIME_POSIX_FORMATS : Additional posix formats
- LIBC_STRFTIME_NONSTANDARD_FORMATS : Additional GNU nonstandard formats
All of these are enabled by default unless building for CONFIG_DEFAULT_SMALL.
Disabling these options can save over 3KB of flash on an 32-bit
ARM system, when all the format specifiers are not needed.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
Now that time_t is unconditionally 64-bit (signed int64_t) and the
struct timespec fields tv_sec / tv_nsec are wide enough on their own,
the explicit (uint64_t)/(int64_t)/(int) casts that used to guard the
multiplications and subtractions in *_us / *_ms / *_ns helpers are no
longer needed. Drop them to keep the timekeeping math readable and
consistent with the previous sclock_t/time_t cleanup.
In the same spirit, this commit also:
* Normalises the printf-style format specifiers and casts used to
print tv_sec / tv_nsec / tv_usec values across arch/, drivers/,
fs/, sched/ and libs/. The prior code was a mix of
"%d"/"%u"/"%ld"/"%lu"/"%lld"/PRIu32/PRIu64 with matching
(int)/(unsigned long)/(long long)/PRIu* casts; some formats
truncated time_t on 32-bit hosts, others mismatched signedness or
width. Replace all such cases with the portable POSIX-recommended
forms:
- tv_sec (time_t, signed, impl-defined width) -> %jd + (intmax_t)
- tv_nsec (long, signed) -> %ld (no cast)
- tv_usec (suseconds_t / long) -> %ld (no cast)
Add #include <stdint.h> where required.
* Drops a few stale `(FAR const time_t *)&ts.tv_sec` casts and
related `(FAR struct tm *)` / `(const time_t *)` casts in
gmtime_r() / localtime_r() / gmtime() callers; ts.tv_sec is plain
time_t now and the casts only obscured the type.
* Fixes one overflow in fs/procfs/fs_procfscritmon.c where
all_time.tv_sec * 1000000 could overflow on 32-bit time_t before
being multiplied again; cast to uint64_t at the start.
No behavioural change.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
POSIX leaves the signedness of time_t and clock_t unspecified, but
mainstream implementations (Linux glibc/musl, the BSDs, macOS, RTEMS,
Zephyr's POSIX layer, Windows _time64) expose time_t as signed 64-bit.
NuttX has historically used uint64_t only because it was tied to the
CONFIG_SYSTEM_TIME64 knob; with that gone, switch:
time_t : uint64_t -> int64_t
clock_t : uint64_t -> int64_t
CLOCK_MAX: UINT64_MAX -> INT64_MAX
This lets (time_t)-1 sentinels, negative tick deltas, and host-side
headers behave as on every other POSIX system without source churn.
Headers updated:
- include/sys/types.h, include/limits.h, include/nuttx/clock.h
- include/nuttx/fs/hostfs.h (nuttx_time_t alias)
- include/nuttx/{mqueue.h,wdog.h,wqueue.h,timers/clkcnt.h}
Because clock_t is now signed 64-bit, the NuttX-internal sclock_t
alias becomes redundant: every sclock_t/SCLOCK_MAX use is folded
back to clock_t/CLOCK_MAX (notably in sched/wdog, sched/mqueue,
sched/sched, sched/clock, sched/timer, libs/libc/time, fs/vfs and
the drivers/arch consumers below).
Tick/period constants (NSEC_PER_SEC, USEC_PER_SEC, MSEC_PER_SEC,
SEC_PER_MIN, ...) in include/nuttx/clock.h are retyped from "long"
literals to INT64_C(...) so that 64-bit arithmetic no longer
depends on the host's long width.
Strip now-redundant (time_t)/(clock_t)/(unsigned long) casts and
unsigned-only branches across the tree:
- arch RTC / oneshot / tickless lowerhalfs:
arm: cxd56xx, efm32, imxrt, lc823450, max326xx, sam34, sama5,
samd5e5, samv7, stm32, stm32f7, stm32h7, stm32l4, stm32wb,
xmc4
mips: pic32mz sparc: bm3803 x86_64: intel64
risc-v/xtensa: espressif (esp_i2c[_slave], esp_rtc,
esp32c3{_i2c,_rtc,_wifi_adapter}, esp32{,s2,s3}_*),
mpfs_perf
- drivers: audio/tone, input/aw86225, power/pm/{activity,
stability}_governor, rpmsg/rpmsg_ping,
timers/{ds3231,mcp794xx,pcf85263,rx8010},
wireless/ieee80211/bcm43xxx, wireless/spirit/spirit_spi
- core: fs/vfs/{fs_poll,fs_timerfd}, mm/iob/iob_alloc,
libs/libc/{netdb/lib_dnscache,time/{lib_calendar2utc,
lib_time}}, net/icmp/icmp_pmtu, net/icmpv6/icmpv6_pmtu,
net/ipfrag, net/tcp/{tcp.h,tcp_timer},
net/utils/net_snoop, net/mld/mld_query (drop the now-dead
mld_mrc2mrd helper since signed math handles it directly),
sched/clock/{clock,clock_initialize},
sched/sched/{sched_profil,sched_setparam,sched_setscheduler},
sched/pthread/pthread_create,
sched/wdog/{wd_gettime,wd_start,wdog.h},
sched/timer/timer_gettime, sched/mqueue/*
Flip the few in-tree printf format strings that assumed an
unsigned 64-bit tv_sec:
* drivers/rpmsg/rpmsg_ping.c PRIu64 -> PRId64
* arch/xtensa/src/esp32{,s2,s3}/esp32*_oneshot_lowerhalf.c
PRIu32 (already wrong) -> PRId64
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Correct duplicate "is is" word found in 181 files throughout the
codebase.
In most cases "is is" was changed to "is", but in contexts like
"MCU is is sleep mode" it was corrected to "MCU in sleep mode".
Also fixes a "the the" typo in net/inet/inet_sockif.c.
This is a pure style/documentation fix that improves code readability.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Causing kernel build report undefined reference 'g_nx_initstate'
Also protect build, as user elf have no access of kernel objects.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
reason:
We can utilize percpu storage to hold information about the
current running task. If we intend to implement this feature, we would
need to define two macros that help us manage this percpu information
effectively.
up_this_task: This macro is designed to read the contents of the percpu
register to retrieve information about the current
running task.This allows us to quickly access
task-specific data without having to disable interrupts,
access global variables and obtain the current cpu index.
up_update_task: This macro is responsible for updating the contents of
the percpu register.It is typically called during
initialization or when a context switch occurs to ensure
that the percpu register reflects the information of the
newly running task.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This code is licensed under BSD-4-Clause license which may render the OS unusable for some products.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
testcase:
set TZ CEST
time_t t = time(NULL);
struct tm *ts = localtime(&t);
t = timegm(ts);
t will return (time_t)-1;
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
