During the Toybox port to NuttX, Claude noticed that changes in the
menuconfig weren't taking affect. This issue exists for a long time on
NuttX, in fact BayLibre's presentation from 2017 make jokes about our
building system not been reliable:
https://www.youtube.com/watch?v=XUJK2htXxKw&t=320s
Stale archive members from $(AR)'s additive-only behavior can linger
after Kconfig toggles change which files provide a symbol, causing dead
weight or "multiple definition" link errors on incremental builds.
Fixed by splitting ARCHIVE into two macros: ARCHIVE keeps the original
additive behavior for apps/libapps.a, which many independent
subdirectories contribute to across a build, while the new
ARCHIVE_REBUILD deletes then archives for the far more common case
of a single Makefile building its own self-contained $(OBJS)
- all 39 such call sites now use it.
Assisted-By: Claude Sonnet 5
Signed-off-by: Alan C. Assis <acassis@gmail.com>
NuttX defines constants for the sizes of types just as constants
directly in the code. The real values depend on compiler and target
platform. It is possible that value declared by NuttX header is wrong
compared to the compiler configuration. This is more likely in case of
floating points.
Not all compilers supported by NuttX provide required info through
defines and thus it is more generic to specify limits as constants, but
in case compiler provides them then it is a good idea to compare. This
commit adds such set of comparisons for limits.h and float.h constants.
The comparisons were tested with GCC and Clang. They will be ignored in
case compiler doesn't provide them.
Signed-off-by: Karel Kočí <kkoci@elektroline.cz>
Intermediate files of make depend like .ddc and .dds may remain
when make is interrupted. Remove them using make distclean.
Signed-off-by: SPRESENSE <41312067+SPRESENSE@users.noreply.github.com>
Renaming "modlib" to "libelf" is more in line with the implementation content,
which makes it easier for individual developers to understand the capabilities of this module.
CONFIG_LIBC_MODLIB -> CONFIG_LIBC_ELF
Signed-off-by: chao an <anchao.archer@bytedance.com>
This generates gnu-elf.ld via preprocessing of gnu-elf.ld.in so
that to reduce board specific app linker scripts in kernel mode
when BINFMT_ELF_EXECUTABLE is enabled.
Signed-off-by: Yanfeng Liu <p-liuyanfeng9@xiaomi.com>
1. Calling CLEAN on these folders did not have any effect
2. bin,kbin will be created during the context construction process
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
you can debug nuttx through any transport layer (serial port, network etc.),
currently supports the following functions:
1. Read and write registers
2. Read and write memory
3. Switch thread and read stack information
Future support plans:
1. Support breakpoint, watch point (requires architecture support).
related information:
https://sourceware.org/gdb/onlinedocs/gdb/Remote-Protocol.html
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Add the `LIBC_PREVENT_STRING_KERNEL` and `LIBC_PREVENT_STRING_USER`
that are meant to be selected by the chip if no libc implementation
is going to be built. If selected, neither NuttX's software version
of the libc nor any architecture-specific implementation will be
built in the kernel or in the userspace, respectively. In this
case, the linker may provide a ROM-defined version of the libc
functions instead.
Use double delim to fix windows native build and give an error:
makefile:132: *** target mode do not include“%”. stop.
In Windows environment DELIM := $(strip \) but \ has two role:
first: \ as directory, and second \ as Escape character, Reference:
https://github.com/apache/nuttx/pull/7572#discussion_r1028219229
Signed-off-by: chao an <anchao@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Make use of XCHG/BSWAP on x86, REV16 and REV on ARMv6-m and above,
and whatever other optimized instructions on other platforms.
Defines extra CONFIG variables, and removes the unused functions for
endian-swapping. Fixes some oversights in using the macros.
Targets build during the kernel phase did not have their dependencies
specified and thus they were not rebuilt after their dependencies have
changed, for example by changing options in menuconfig.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
since exit will be only callable from userspace and change
the 1st argument from "const uint8_t *" to "const char *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86487d57210ab63109148232da71dbc4d60a563b
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.
Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Eliminate the MOVEOBJ definition from tools/Config.mk, Makefiles, and other locations. The MOVEOBJ definition was used to work around the case where the object output of a compile or assemble is in a different directory than the source file. The ZDS-II tools have no command line option to perform this move; MOVEOBJ handled the move as a post-compiler operation.
MOVEOBJ is no longer needed because this the ez80 COMPILE and ASSEMBLE definitions now handle all of the object file movement cases.
