Align the NuttX open(2) flag constants with the Linux asm-generic
values so that the FUSE wire protocol and other cross-platform
interfaces work without conversion.
All code that used '(flags & O_RDONLY)' as a bitmask check (always 0
now that O_RDONLY=0) has been updated to use '(flags & O_ACCMODE)'
comparisons.
The NUTTX_O_* constants in include/nuttx/fs/hostfs.h are updated to
match, and the sim hostfs open flag mapping is fixed.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
O_RDOK and O_WROK are non-standard aliases for O_RDONLY and O_WRONLY
respectively. Having two names for the same flag creates confusion,
especially when aligning the flag values with Linux. Remove the
aliases and replace all uses with the standard O_RDONLY/O_WRONLY.
No functional change — O_RDOK was defined as O_RDONLY and O_WROK as
O_WRONLY, so the replacement is a pure text substitution.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Every compiler supported by NuttX provides the "long long" types,
so the CONFIG_HAVE_LONG_LONG indirection is no longer useful.
Remove the option from include/nuttx/compiler.h and treat
"long long" as unconditionally available across the OS.
In addition to deleting the guard itself, this commit unconditionally
enables the long-long flavored helpers that used to be gated behind
it:
- libs/libc/fixedmath: drop the soft-emulated b32/ub32 routines
in lib_fixedmath.c (-261 lines) and trim the matching
prototypes, Make.defs and CMakeLists.txt entries; keep only
the long-long backed implementations.
- include/sys/endian.h, include/strings.h, libs/libc/string
/lib_ffsll.c, lib_flsll.c: always expose the 64-bit byte-swap
and ffsll/flsll variants.
- libs/libm/libm/lib_llround{,f,l}.c: drop the empty stubs.
- libs/libc/stdlib (atoll, llabs, lldiv, strtoll/ull, rand48,
strtold), libs/libc/stream (libvsprintf, libvscanf,
libbsprintf, ultoa_invert), libs/libc/misc (crc64, crc64emac),
libs/libc/inttypes/strtoimax, libs/libc/lzf, libs/libc/libc.csv,
libs/libc/string (memset, vikmemcpy): remove the
#ifdef CONFIG_HAVE_LONG_LONG branches.
- include/{stddef.h,stdlib.h,fixedmath.h,sys/epoll.h,cxx/cstdlib,
nuttx/audio/audio.h,nuttx/crc64.h,nuttx/lib/math.h,
nuttx/lib/math32.h,nuttx/lib/stdbit.h}: same guard cleanup.
- drivers/note/note_driver.c, fs/spiffs/src/spiffs.h,
sched/irq/irq_procfs.c: drop their local guards as well.
- Documentation/applications/netutils/ntpclient/index.rst:
refresh the documentation snippet.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
debug.h is a NuttX-specific, non-POSIX header. Placing it in the
top-level include/ directory creates naming conflicts with external
projects that define their own debug.h.
This commit moves the canonical header to include/nuttx/debug.h,
following the NuttX convention for non-POSIX/non-standard headers,
and updates all in-tree references.
A backward-compatibility shim is left at include/debug.h that
emits a deprecation #warning and re-includes <nuttx/debug.h>,
allowing out-of-tree code to continue building while migrating.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
currently, nuttx implements readv/writev on the top of read/write.
while it might work for the simplest cases, it's broken by design.
for example, it's impossible to make it work correctly for files
which need to preserve data boundaries without allocating a single
contiguous buffer. (udp socket, some character devices, etc)
this change is a start of the migration to a better design.
that is, implement read/write on the top of readv/writev.
to avoid a single huge change, following things will NOT be done in
this commit:
* fix actual bugs caused by the original readv-based-on-read design.
(cf. https://github.com/apache/nuttx/pull/12674)
* adapt filesystems/drivers to actually benefit from the new interface.
(except a few trivial examples)
* eventually retire the old interface.
* retire read/write syscalls. implement them in libc instead.
* pread/pwrite/preadv/pwritev (except the introduction of struct uio,
which is a preparation to back these variations with the new
interface.)
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
According to the POSIX standard, `fstat` and `stat` should return 0
(`OK`) on success. This commit changed the underlying `spiffs`
implementation to follow the POSIX standard.
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
and implement all status related change function. the individual
file system change will provide in other upcoming patchset.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8fde9db8eba9586e9c8da078b67e020c26623cf4
