From e77071c6e08b5ba8c3c100c159a8d0bb8ac2963a Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Mon, 2 Sep 2013 12:26:15 -0600 Subject: [PATCH] SAMA5 UDPHS: Some very early debug corrections. Not yet working. --- configs/sama5d3x-ek/README.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/configs/sama5d3x-ek/README.txt b/configs/sama5d3x-ek/README.txt index cfebbc95415..bcbdff21104 100644 --- a/configs/sama5d3x-ek/README.txt +++ b/configs/sama5d3x-ek/README.txt @@ -1241,6 +1241,15 @@ Configurations Device Drivers -> USB Device Driver Support CONFIG_CDCACM=y : Enable the CDC/ACM device + The following setting enables an example that can can be used to + control the CDC/ACM device. It will add two new NSH commands: + (1) sercon will connect the USB serial device (creating /dev/ttyACM0), + and (2) serdis which will disconnect the USB serial device (destroying + /dev/ttyACM0). + + Application Configuration -> Examples: + CONFIG_EXAMPLES_CDCACM=y : Enable an CDC/ACM example + STATUS: 2013-7-19: This configuration (as do the others) run at 396MHz. The SAMA5D3 can run at 536MHz. I still need to figure out the