diff --git a/Documentation/platforms/arm/imxrt/boards/imxrt1180-evk/index.rst b/Documentation/platforms/arm/imxrt/boards/imxrt1180-evk/index.rst index e275bc0ab04..72342a75d8d 100644 --- a/Documentation/platforms/arm/imxrt/boards/imxrt1180-evk/index.rst +++ b/Documentation/platforms/arm/imxrt/boards/imxrt1180-evk/index.rst @@ -42,8 +42,10 @@ Features - Two software-controlled user LEDs The current NuttX configurations provide the serial console, USB device -support, image generation, and multicore boot flow. The other on-board -interfaces listed above are not enabled by the supplied configurations. +support, image generation, and multicore boot flow. The Cortex-M7 ``nsh`` +configuration also enables the onboard MicroSD socket through USDHC1. Other +on-board interfaces listed above are not enabled by the supplied +configurations. Buttons and LEDs ================ @@ -246,7 +248,8 @@ nsh Runs NSH on the Cortex-M7. The output ``nuttx.bin`` is a raw XIP payload that must be programmed at offset ``0x80000`` and started by the ``bl`` configuration. NSH is available on LPUART1 at the MCU-Link virtual COM port. -This configuration also enables USB CDC/ACM and the ``ostest`` application. +This configuration also enables USB CDC/ACM, the ``ostest`` application, and +the onboard MicroSD socket via USDHC1. License Exceptions ================== diff --git a/Documentation/platforms/arm/imxrt/index.rst b/Documentation/platforms/arm/imxrt/index.rst index 9a22d8016b5..3e302d83aaf 100644 --- a/Documentation/platforms/arm/imxrt/index.rst +++ b/Documentation/platforms/arm/imxrt/index.rst @@ -106,6 +106,7 @@ SAI No SPDIF No SPI Yes UART Yes +uSDHC Yes USB Yes ========== ======= @@ -281,6 +282,13 @@ UART Universal Asynchronous Receiver/Transmitter module. UART is initialized automatically during MCU boot. +uSDHC +----- + +The uSDHC driver provides SD/MMC support and is available on the i.MX RT118x. +The i.MX RT1180 EVK NSH configuration enables USDHC1 for its onboard MicroSD +socket. + USB ---