Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-08 05:57:16 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Add an NSH configuration for the NuTiny-SDK-NUC120. Still does not work

Browse source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5678 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-02-26 21:53:12 +00:00
parent 1f8a453878
commit ca83133f2b
8 changed files with 947 additions and 154 deletions
Download patch file Download diff file Expand all files Collapse all files

22
arch/Kconfig
View file

@ -303,12 +303,22 @@ config ARCH_RAMFUNCS
comment "Board Settings"
config BOARD_LOOPSPERMSEC
int "Loops per millisecond"
help
Must be calibrated for correct operation of delay loops.
You simply use a stop watch to measure the 100 second delay
then adjust CONFIG_BOARD_LOOPSPERMSEC until it is actually
is 100 seconds.
int "Delay loops per millisecond"
default 5000
---help---
Simple delay loops are used by some logic, especially during boot-up,
driver initialization. These delay loops must be calibrated for each
board in order to assure accurate timing by the delay loops.
config ARCH_CALIBRATION
bool "Calibrate delay loop"
default n
---help---
Enables some built in instrumentation that causes a 100 second delay
during boot-up. This 100 second delay serves no purpose other than it
allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop
watch to measure the actual delay then adjust BOARD_LOOPSPERMSEC until
the actual delay is 100 seconds.
config DRAM_START
hex "DRAM start physical address"

16
arch/arm/Kconfig
View file

@ -251,22 +251,6 @@ config PAGING
If set =y in your configation file, this setting will enable the on-demand
paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html.
config BOARD_LOOPSPERMSEC
int "Delay loops per millisecond"
default 5000
---help---
Delay loops nust be calibrated for correct operation.
config ARCH_CALIBRATION
bool "Calibrate delay loop"
default n
---help---
Enables some built in instrumentation that causes a 100 second delay
during boot-up. This 100 second delay serves no purpose other than it
allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop
watch to measure the 100 second delay then adjust BOARD_LOOPSPERMSEC until
the delay actually is 100 seconds.
config DEBUG_HARDFAULT
bool "Verbose Hard-Fault Debug"
default n

2
arch/arm/src/nuc1xx/nuc_lowputc.c
View file

@ -299,7 +299,7 @@ void nuc_lowsetup(void)
#endif
#if NUC_CONSOLE_2STOP != 0
revgval |= UART_LCR_NSB;
regval |= UART_LCR_NSB;
#endif
putreg32(regval, NUC_CONSOLE_BASE + NUC_UART_LCR_OFFSET);

220
arch/arm/src/nuc1xx/nuc_serial.c
View file

@ -242,86 +242,64 @@ static uart_dev_t g_uart2port =
};
#endif /* CONFIG_NUC_UART2 */
/* Which UART with be tty0/console and which tty1? tty2? */
/* Which UART with be tty0/console and which tty1? tty2? The console, if it
* exists, will always be ttyS0. If there is no console then will use the
* lowest numbered UART.
*/
#ifdef HAVE_CONSOLE
# if defined(CONFIG_UART0_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart0port /* UART0=console */
# define TTYS0_DEV g_uart0port /* UART0=ttyS0 */
# ifdef CONFIG_NUC_UART1
# define TTYS1_DEV g_uart1port /* UART0=ttyS0;UART1=ttyS1 */
# ifdef CONFIG_NUC_UART2
# define TTYS2_DEV g_uart2port /* UART0=ttyS0;UART1=ttyS1;UART2=ttyS2 */
# else
# undef TTYS2_DEV /* UART0=ttyS0;UART1=ttyS1;No ttyS2*/
# endif
# else
# ifdef CONFIG_NUC_UART2
# define TTYS1_DEV g_uart2port /* UART0=ttyS0;UART2=ttyS1 */
# undef TTYS2_DEV /* UART0=ttyS0;UART2=ttyS1;No ttyS2*/
# else
# undef TTYS1_DEV /* UART0=ttyS0;No ttyS1;No ttyS2 */
# undef TTYS2_DEV /* No ttyS2 */
# endif
# endif
# elif defined(CONFIG_UART1_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart1port /* UART1=console */
# define TTYS0_DEV g_uart1port /* UART1=ttyS0 */
# ifdef CONFIG_NUC_UART0
# define TTYS1_DEV g_uart0port /* UART1=ttyS0;UART0=ttyS1 */
# ifdef CONFIG_NUC_UART2
# define TTYS2_DEV g_uart2port /* UART1=ttyS0;UART0=ttyS1;UART2=ttyS2 */
# else
# undef TTYS2_DEV /* UART1=ttyS0;UART0=ttyS1;No ttyS2 */
# endif
# else
# ifdef CONFIG_NUC_UART2
# define TTYS1_DEV g_uart2port /* UART1=ttyS0;UART2=ttyS1 */
# undef TTYS2_DEV /* UART1=ttyS0;UART2=ttyS1;No ttyS2 */
# else
# undef TTYS1_DEV /* UART1=ttyS0;No ttyS1;No ttyS2 */
# undef TTYS2_DEV /* No ttyS2 */
# endif
# endif
# elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart2port /* UART2=console */
# define TTYS0_DEV g_uart2port /* UART2=ttyS0 */
# ifdef CONFIG_NUC_UART2
# define TTYS1_DEV g_uart0port /* UART2=ttyS0;UART0=ttyS1 */
# ifdef CONFIG_NUC_UART1
# define TTYS2_DEV g_uart1port /* UART2=ttyS0;UART0=ttyS1;UART1=ttyS2 */
# else
# undef TTYS2_DEV /* UART2=ttyS0;UART0=ttyS1;No ttyS2 */
# endif
# else
# ifdef CONFIG_NUC_UART1
# define TTYS1_DEV g_uart1port /* UART2=ttyS0;UART1=ttyS1 */
# undef TTYS2_DEV /* UART2=ttyS0;UART1=ttyS1;No ttyS2 */
# else
# undef TTYS1_DEV /* UART2=ttyS0;No ttyS1;No ttyS2 */
# undef TTYS2_DEV /* No ttyS2 */
# endif
# endif
/* First pick the console and ttys0. This could be any of UART0-2 */
#if defined(CONFIG_UART0_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart0port /* UART0 is console */
# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */
# define UART0_ASSIGNED 1
#elif defined(CONFIG_UART1_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart1port /* UART1 is console */
# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */
# define UART1_ASSIGNED 1
#elif defined(CONFIG_UART2_SERIAL_CONSOLE)
# define CONSOLE_DEV g_uart2port /* UART2 is console */
# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */
# define UART2_ASSIGNED 1
#else
# undef CONSOLE_DEV /* No console */
# if defined(CONFIG_NUC_UART0)
# define TTYS0_DEV g_uart0port /* UART0 is ttyS0 */
# define UART0_ASSIGNED 1
# elif defined(CONFIG_NUC_UART1)
# define TTYS0_DEV g_uart1port /* UART1 is ttyS0 */
# define UART1_ASSIGNED 1
# elif defined(CONFIG_NUC_UART2)
# define TTYS0_DEV g_uart2port /* UART2 is ttyS0 */
# define UART2_ASSIGNED 1
# endif
#else /* No console */
# define TTYS0_DEV g_uart0port /* UART0=ttyS0 */
# ifdef CONFIG_NUC_UART1
# define TTYS1_DEV g_uart1port /* UART0=ttyS0;UART1=ttyS1 */
# ifdef CONFIG_NUC_UART2
# define TTYS2_DEV g_uart2port /* UART0=ttyS0;UART1=ttyS1;UART2=ttyS2 */
# else
# undef TTYS2_DEV /* UART0=ttyS0;UART1=ttyS1;No ttyS2 */
# endif
# else
# ifdef CONFIG_NUC_UART2
# define TTYS1_DEV g_uart2port /* UART0=ttyS0;UART2=ttyS1 */
# undef TTYS2_DEV /* UART0=ttyS0;UART2=ttyS1;No ttyS2 */
# else
# undef TTYS1_DEV /* UART0=ttyS0;No ttyS1;No ttyS2 */
# undef TTYS2_DEV /* No ttyS2 */
# endif
# endif
#endif /* HAVE_CONSOLE */
#endif
/* Pick ttys1. This could be any two of UART0-2 excluding the console UART. */
#if defined(CONFIG_NUC_UART0) && !defined(UART0_ASSIGNED)
# define TTYS1_DEV g_uart0port /* UART0 is ttyS1 */
# define UART0_ASSIGNED 1
#elif defined(CONFIG_NUC_UART1) && !defined(UART1_ASSIGNED)
# define TTYS1_DEV g_uart1port /* UART1 is ttyS1 */
# define UART1_ASSIGNED 1
#elif defined(CONFIG_NUC_UART2) && !defined(UART2_ASSIGNED)
# define TTYS1_DEV g_uart2port /* UART2 is ttyS1 */
# define UART2_ASSIGNED 1
#endif
/* Pick ttys2. This could be one of UART1-2. It can't be UART0 because that
* was either assigned as ttyS0 or ttys1. One of UART 1-2 could also be the
* console.
*/
#if defined(CONFIG_NUC_UART1) && !defined(UART1_ASSIGNED)
# define TTYS2_DEV g_uart1port /* UART1 is ttyS2 */
# define UART1_ASSIGNED 1
#elif defined(CONFIG_NUC_UART2) && !defined(UART2_ASSIGNED)
# define TTYS2_DEV g_uart2port /* UART2 is ttyS2 */
# define UART2_ASSIGNED 1
#endif
/****************************************************************************
* Inline Functions
@ -391,46 +369,61 @@ static int up_setup(struct uart_dev_s *dev)
/* Reset the TX FIFO */
regval = up_serialin(priv, NUC_UART_FCR_OFFSET
regval |= UART_FCR_TFR
up_serialout(priv, NUC_UART_FCR_OFFSET, regval);
regval = up_serialin(priv, NUC_UART_FCR_OFFSET);
up_serialout(priv, NUC_UART_FCR_OFFSET, regval | UART_FCR_TFR);
/* Reset the RX FIFO */
regval = up_serialin(priv, NUC_UART_FCR_OFFSET
regval |= UART_FCR_RFR
up_serialout(priv, NUC_UART_FCR_OFFSET, regval);
up_serialout(priv, NUC_UART_FCR_OFFSET, regval | UART_FCR_RFR);
/* Set Rx Trigger Level */
regval &= ~UART_FCR_FRITL_MASK;
regval &= ~(UART_FCR_FRITL_MASK | UART_FCR_TFR | UART_FCR_RFR);
regval |= UART_FCR_FRITL_4;
up_serialout(priv, NUC_UART_FCR_OFFSET, regval);
/* Set Parity & Data bits and Stop bits */
regval = 0;
#if NUC_CONSOLE_BITS == 5
regval |= UART_LCR_WLS_5;
#elif NUC_CONSOLE_BITS == 6
regval |= UART_LCR_WLS_6;
#elif NUC_CONSOLE_BITS == 7
regval |= UART_LCR_WLS_7;
#elif NUC_CONSOLE_BITS == 8
regval |= UART_LCR_WLS_8;
#else
error "Unknown console UART data width"
#endif
switch (priv->bits)
{
case 5:
regval |= UART_LCR_WLS_5;
break;
#if NUC_CONSOLE_PARITY == 1
regval |= UART_LCR_PBE;
#elif NUC_CONSOLE_PARITY == 2
regval |= (UART_LCR_PBE | UART_LCR_EPE);
#endif
case 6:
regval |= UART_LCR_WLS_6;
break;
#if NUC_CONSOLE_2STOP != 0
revgval |= UART_LCR_NSB;
#endif
case 7:
regval |= UART_LCR_WLS_7;
break;
default:
case 8:
regval |= UART_LCR_WLS_8;
break;
}
switch (priv->parity)
{
default:
case 0:
break;
case 1:
regval |= UART_LCR_PBE;
break;
case 2:
regval |= (UART_LCR_PBE | UART_LCR_EPE);
break;
}
if (priv->stopbits2)
{
regval |= UART_LCR_NSB;
}
up_serialout(priv, NUC_UART_LCR_OFFSET, regval);
@ -441,7 +434,7 @@ static int up_setup(struct uart_dev_s *dev)
/* Set the baud */
nuc_setbaud(CONSOLE_BASE, CONSOLE_BAUD);
nuc_setbaud(priv->uartbase, priv->baud);
/* Set up the IER */
@ -597,28 +590,25 @@ static int up_interrupt(int irq, void *context)
{
/* REVISIT: Do we clear this be reading the modem status register? */
volatile uint32_t status = up_serialin(priv, NUC_UART_MSR_OFFSET);
vdbg("MSR: %08x\n", status);
(void)up_serialin(priv, NUC_UART_MSR_OFFSET);
}
/* Check for line status */
if ((status & UART_ISR_RLS_INT) != 0)
{
/* REVISIT: Do we clear this be reading the line status register? */
/* REVISIT: Do we clear this be reading the FIFO status register? */
volatile uint32_t status = up_serialin(priv, NUC_UART_FSR_OFFSET);
vdbg("LSR: %08x\n", status);
(void)up_serialin(priv, NUC_UART_FSR_OFFSET);
}
/* Check for buffer errors */
if ((status & UART_ISR_BUF_ERR_INT) != 0)
{
/* REVISIT: Do we clear this be reading the line status register? */
/* REVISIT: Do we clear this by reading the FIFO status register? */
volatile uint32_t status = up_serialin(priv, NUC_UART_MSR_OFFSET);
vdbg("MSR: %08x\n", status);
(void)up_serialin(priv, NUC_UART_FSR_OFFSET);
}
}
@ -651,7 +641,7 @@ static int up_ioctl(struct file *filep, int cmd, unsigned long arg)
}
else
{
memcpy(user, dev, sizeof(struct nuc_dev_s));
memcpy(user, priv, sizeof(struct nuc_dev_s));
}
}
break;
@ -754,7 +744,7 @@ static void up_rxint(struct uart_dev_s *dev, bool enable)
{
#ifndef CONFIG_SUPPRESS_SERIAL_INTS
priv->ier |= (UART_IER_RDA_IEN | UART_IER_RLS_IEN | UART_IER_RTO_IEN |
UART_IER_BUF_ERR_IEN UART_IER_TIME_OUT_EN);
UART_IER_BUF_ERR_IEN | UART_IER_TIME_OUT_EN);
#endif
}
else

16
arch/mips/Kconfig
View file

@ -32,22 +32,6 @@ config ARCH_CHIP
string
default "pic32mx" if ARCH_CHIP_PIC32MX
config BOARD_LOOPSPERMSEC
int "Delay loops per millisecond"
default 5000
---help---
Delay loops nust be calibrated for correct operation.
config ARCH_CALIBRATION
bool "Calibrate delay loop"
default n
---help---
Enables some built in instrumentation that causes a 100 second delay
during boot-up. This 100 second delay serves no purpose other than it
allows you to calibratre BOARD_LOOPSPERMSEC. You simply use a stop
watch to measure the 100 second delay then adjust BOARD_LOOPSPERMSEC until
the delay actually is 100 seconds.
source arch/mips/src/common/Kconfig
source arch/mips/src/mips32/Kconfig
source arch/mips/src/pic32mx/Kconfig

122
configs/nutiny-nuc120/nsh/Make.defs Normal file
View file

@ -0,0 +1,122 @@
############################################################################
# configs/nutiny-nuc120/nsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv6-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
ifeq ($(CONFIG_HOST_WINDOWS),y)
HOSTEXEEXT = .exe
else
HOSTEXEEXT =
endif
ifeq ($(WINTOOL),y)
# Windows-native host tools
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
else
# Linux/Cygwin-native host tools
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
endif

628
configs/nutiny-nuc120/nsh/defconfig Normal file
View file

@ -0,0 +1,628 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_HOST_LINUX is not set
# CONFIG_HOST_OSX is not set
CONFIG_HOST_WINDOWS=y
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
CONFIG_WINDOWS_CYGWIN=y
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
CONFIG_ARCH_CHIP_NUC1XX=y
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM0=y
CONFIG_ARCH_FAMILY="armv6-m"
CONFIG_ARCH_CHIP="nuc1xx"
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_MPU is not set
#
# ARMV6M Configuration Options
#
# CONFIG_ARMV6M_TOOLCHAIN_ATOLLIC is not set
CONFIG_ARMV6M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV6M_TOOLCHAIN_CODEREDW is not set
# CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW is not set
# CONFIG_ARMV6M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV6M_TOOLCHAIN_GNU_EABI is not set
#
# NUC100/120 Configuration Options
#
# CONFIG_ARCH_CHIP_NUC100LC1BN is not set
# CONFIG_ARCH_CHIP_NUC100LD1BN is not set
# CONFIG_ARCH_CHIP_NUC100LD2BN is not set
# CONFIG_ARCH_CHIP_NUC100RC1BN is not set
# CONFIG_ARCH_CHIP_NUC100RD1BN is not set
# CONFIG_ARCH_CHIP_NUC100RD2BN is not set
# CONFIG_ARCH_CHIP_NUC100LD3AN is not set
# CONFIG_ARCH_CHIP_NUC100LE3AN is not set
# CONFIG_ARCH_CHIP_NUC100RD3AN is not set
# CONFIG_ARCH_CHIP_NUC100RE3AN is not set
# CONFIG_ARCH_CHIP_NUC100VD2AN is not set
# CONFIG_ARCH_CHIP_NUC100VD3AN is not set
# CONFIG_ARCH_CHIP_NUC100VE3AN is not set
# CONFIG_ARCH_CHIP_NUC120LC1BN is not set
# CONFIG_ARCH_CHIP_NUC120LD1BN is not set
# CONFIG_ARCH_CHIP_NUC120LD2BN is not set
# CONFIG_ARCH_CHIP_NUC120RC1BN is not set
# CONFIG_ARCH_CHIP_NUC120RD1BN is not set
# CONFIG_ARCH_CHIP_NUC120RD2BN is not set
# CONFIG_ARCH_CHIP_NUC120LD3AN is not set
CONFIG_ARCH_CHIP_NUC120LE3AN=y
# CONFIG_ARCH_CHIP_NUC120RD3AN is not set
# CONFIG_ARCH_CHIP_NUC120RE3AN is not set
# CONFIG_ARCH_CHIP_NUC120VD2AN is not set
# CONFIG_ARCH_CHIP_NUC120VD3AN is not set
# CONFIG_ARCH_CHIP_NUC120VE3AN is not set
CONFIG_ARCH_FAMILY_NUC120=y
CONFIG_ARCH_NUC_MEDIUMDENSITY=y
#
# NUC1XX Peripheral Support
#
# CONFIG_NUC_PDMA is not set
# CONFIG_NUC_FMC is not set
# CONFIG_NUC_EBI is not set
# CONFIG_NUC_WDT is not set
# CONFIG_NUC_RTC is not set
# CONFIG_NUC_TMR0 is not set
# CONFIG_NUC_TMR1 is not set
# CONFIG_NUC_TIMR2 is not set
# CONFIG_NUC_TIMR3 is not set
# CONFIG_NUC_I2C0 is not set
# CONFIG_NUC_I2C1 is not set
# CONFIG_NUC_SPI0 is not set
# CONFIG_NUC_SPI1 is not set
# CONFIG_NUC_SPI2 is not set
# CONFIG_NUC_SPI3 is not set
# CONFIG_NUC_PWM0 is not set
# CONFIG_NUC_PWM1 is not set
# CONFIG_NUC_PWM2 is not set
# CONFIG_NUC_PWM3 is not set
# CONFIG_NUC_PWM4 is not set
# CONFIG_NUC_PWM5 is not set
# CONFIG_NUC_PWM6 is not set
# CONFIG_NUC_PWM7 is not set
# CONFIG_NUC_UART0 is not set
CONFIG_NUC_UART1=y
# CONFIG_NUC_USBD is not set
# CONFIG_NUC_ACMP is not set
# CONFIG_NUC_ADC is not set
# CONFIG_NUC_PS2 is not set
# CONFIG_NUC_I2S is not set
CONFIG_NUC_INTHI=y
CONFIG_NUC_SYSTICK_XTALHI=y
# CONFIG_NUC_SYSTICK_XTALLO is not set
# CONFIG_NUC_SYSTICK_XTALHId2 is not set
# CONFIG_NUC_SYSTICK_HCLKd2 is not set
# CONFIG_NUC_SYSTICK_INTHId2 is not set
# CONFIG_NUC_UARTCLK_XTALHI is not set
# CONFIG_NUC_UARTCLK_PLL is not set
CONFIG_NUC_UARTCLK_INTHI=y
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=2988
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=16384
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_NUTINY_NUC120=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="nutiny-nuc120"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=2
CONFIG_START_DAY=26
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WORKQUEUE is not set
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
CONFIG_DISABLE_POSIX_TIMERS=y
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_ENVIRON=y
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=8
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=0
CONFIG_NFILE_DESCRIPTORS=6
CONFIG_NFILE_STREAMS=6
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=0
CONFIG_MQ_MAXMSGSIZE=0
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=0
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=1536
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1536
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART1=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_UART1_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART1 Configuration
#
CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART1_BAUD=115200
CONFIG_UART1_BITS=8
CONFIG_UART1_PARITY=0
CONFIG_UART1_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
CONFIG_DISABLE_MOUNTPOINT=y
# CONFIG_FS_RAMMAP is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
CONFIG_MM_SMALL=y
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Binary Formats
#
CONFIG_BINFMT_DISABLE=y
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=0
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=0
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Helper Functions
#
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
CONFIG_NSH_DISABLE_CD=y
CONFIG_NSH_DISABLE_CP=y
CONFIG_NSH_DISABLE_DD=y
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
CONFIG_NSH_DISABLE_GET=y
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
CONFIG_NSH_DISABLE_IFCONFIG=y
# CONFIG_NSH_DISABLE_KILL is not set
CONFIG_NSH_DISABLE_LOSETUP=y
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
CONFIG_NSH_DISABLE_MKDIR=y
CONFIG_NSH_DISABLE_MKFATFS=y
# CONFIG_NSH_DISABLE_MKFIFO is not set
CONFIG_NSH_DISABLE_MKRD=y
# CONFIG_NSH_DISABLE_MH is not set
CONFIG_NSH_DISABLE_MOUNT=y
# CONFIG_NSH_DISABLE_MW is not set
CONFIG_NSH_DISABLE_NSFMOUNT=y
# CONFIG_NSH_DISABLE_PS is not set
CONFIG_NSH_DISABLE_PING=y
CONFIG_NSH_DISABLE_PUT=y
# CONFIG_NSH_DISABLE_PWD is not set
CONFIG_NSH_DISABLE_RM=y
CONFIG_NSH_DISABLE_RMDIR=y
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
CONFIG_NSH_DISABLE_UMOUNT=y
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
CONFIG_NSH_DISABLE_WGET=y
# CONFIG_NSH_DISABLE_XD is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=80
CONFIG_NSH_NESTDEPTH=3
CONFIG_NSH_DISABLESCRIPT=y
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#

75
configs/nutiny-nuc120/nsh/setenv.sh Executable file
View file

@ -0,0 +1,75 @@
#!/bin/bash
# configs/nutiny-nuc120/nsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"