From 76ef9b9572c513a8211a4430d2b4abb63ca1920c Mon Sep 17 00:00:00 2001
From: patacongo <patacongo@42af7a65-404d-4744-a932-0658087f49c3>
Date: Sun, 29 Mar 2009 21:14:34 +0000
Subject: [PATCH] Add SPI method to set SCLK mode

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1669 42af7a65-404d-4744-a932-0658087f49c3
---
 arch/z80/src/ez80/ez80_spi.c    | 56 ++++++++++++++++++++++++++++++++-
 arch/z80/src/ez80/ez80f91_spi.h |  4 +--
 2 files changed, 57 insertions(+), 3 deletions(-)

diff --git a/arch/z80/src/ez80/ez80_spi.c b/arch/z80/src/ez80/ez80_spi.c
index aea2947d7fd..5af30fd0666 100755
--- a/arch/z80/src/ez80/ez80_spi.c
+++ b/arch/z80/src/ez80/ez80_spi.c
@@ -66,6 +66,7 @@
  ****************************************************************************/
 
 static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency);
+static void   spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
 static ubyte  spi_sndbyte(FAR struct spi_dev_s *dev, ubyte ch);
 static void   spi_sndblock(FAR struct spi_dev_s *dev, FAR const ubyte *buffer, size_t buflen);
 static void   spi_recvblock(FAR struct spi_dev_s *dev, FAR ubyte *buffer, size_t buflen);
@@ -78,6 +79,7 @@ static const struct spi_ops_s g_spiops =
 {
   ez80_spiselect,    /* Provided externally by board logic */
   spi_setfrequency,
+  spi_setmode,
   ez80_spistatus,    /* Provided externally by board logic */
   spi_sndbyte,
   spi_sndblock,
@@ -148,6 +150,58 @@ static uint32 spi_setfrequency(FAR struct spi_dev_s *dev, uint32 frequency)
   return ((EZ80_SYS_CLK_FREQ+1)/2 + brg - 1) / brg;
 }
 
+/****************************************************************************
+ * Name: spi_setmode
+ *
+ * Description:
+ *   Set the SPI mode. Optional.  See enum spi_mode_e for mode definitions
+ *
+ * Input Parameters:
+ *   dev -  Device-specific state data
+ *   mode - The SPI mode requested
+ *
+ * Returned Value:
+ *   none
+ *
+ ****************************************************************************/
+
+static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode)
+{
+  ubyte modebits;
+  ubyte regval;
+
+  /* Select the CTL register bits based on the selected mode */
+
+  switch (mode)
+    {
+    case SPIDEV_MODE0: /* CPOL=0 CHPHA=0 */
+      modebits = 0;
+      break;
+
+    case SPIDEV_MODE1: /* CPOL=0 CHPHA=1 */
+      modebits = SPI_CTL_CPHA;
+      break;
+
+    case SPIDEV_MODE2: /* CPOL=1 CHPHA=0 */
+      modebits = SPI_CTL_CPOL;
+      break;
+
+    case SPIDEV_MODE3: /* CPOL=1 CHPHA=1 */
+      modebits = (SPI_CTL_CPOL|SPI_CTL_CPHA);
+      break;
+
+    default:
+      return;
+    }
+
+    /* Then set those bits in the CTL register */
+
+    regval = inp(EZ80_SPI_CTL);
+    regval &= ~(SPI_CTL_CPOL|SPI_CTL_CPHA);
+    regval |= modebits;
+    outp(EZ80_SPI_CTL, regval);
+}
+
 /****************************************************************************
  * Name: spi_waitspif
  *
@@ -367,7 +421,7 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
 
   /* Enable the SPI.
    * NOTE 1: Interrupts are not used in this driver version.
-   * NOTE 2: Certain devices may need changes to SCK polarity settings.
+   * NOTE 2: Initial mode is mode=0.
    */
 
   outp(EZ80_SPI_CTL, SPI_CTL_SPIEN|SPI_CTL_MASTEREN);
diff --git a/arch/z80/src/ez80/ez80f91_spi.h b/arch/z80/src/ez80/ez80f91_spi.h
index 1d03c10cd66..3334e472bda 100644
--- a/arch/z80/src/ez80/ez80f91_spi.h
+++ b/arch/z80/src/ez80/ez80f91_spi.h
@@ -113,8 +113,8 @@ extern "C" {
  *      will bind the SPI driver to the SPI MMC/SD driver.
  */
 
-EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spidev_e devid, boolean selected);
-EXTERN ubyte ez80_spistatus(FAR struct spi_dev_s *dev, enum spidev_e devid);
+EXTERN void ez80_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, boolean selected);
+EXTERN ubyte ez80_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
 
 #undef EXTERN
 #ifdef __cplusplus