Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-16 01:43:15 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

Several important Kinetis build fixes

Browse source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3891 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-08-18 18:16:47 +00:00
parent b2f3e916ef
commit 6269c828b8
8 changed files with 458 additions and 420 deletions
Download patch file Download diff file Expand all files Collapse all files

753
arch/arm/src/kinetis/kinetis_clockconfig.c
View file

@ -1,374 +1,379 @@
/****************************************************************************
* arch/arm/src/kinetis/kinetis_clockconfig.c
* arch/arm/src/chip/kinetis_clockconfig.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "kinetis_internal.h"
#include "kinetis_mcg.h"
#include "kinetis_sim.h"
#include "kinetis_fmc.h"
#include "kinetis_llwu.h"
#include "kinetis_pinmux.h"
/****************************************************************************
* Private Definitions
****************************************************************************/
#ifndef CONFIG_BOOT_RAMFUNCS
# error "CONFIG_BOOT_RAMFUNCS must be defined for this logic"
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void __ramfunc__
kinesis_setdividers(uint32_t div1, uint32_t div2, uint32_t div3, uint32_t div4);
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: kinesis_portclocks
*
* Description:
* Enable all of the port clocks
*
****************************************************************************/
static inline void kinesis_portclocks(void)
{
uint32_t regval;
/* Enable all of the port clocks */
regval = getreg32(KINETIS_SIM_SCGC5);
regval |= (SIM_SCGC5_PORTA | SIM_SCGC5_PORTB | SIM_SCGC5_PORTC |
SIM_SCGC5_PORTD | SIM_SCGC5_PORTE);
putreg32(regval, KINETIS_SIM_SCGC5);
}
/****************************************************************************
* Name: kinesis_setdividers
*
* Description:
* "This routine must be placed in RAM. It is a workaround for errata e2448.
* Flash prefetch must be disabled when the flash clock divider is changed.
* This cannot be performed while executing out of flash. There must be a
* short delay after the clock dividers are changed before prefetch can be
* re-enabled."
*
****************************************************************************/
static void __ramfunc__
kinesis_setdividers(uint32_t div1, uint32_t div2, uint32_t div3, uint32_t div4)
{
uint32_t regval;
int i;
/* Save the current value of the Flash Access Protection Register */
regval = getreg32(KINETIS_FMC_PFAPR);
/* Set M0PFD through M7PFD to 1 to disable prefetch */
putreg32(FMC_PFAPR_M7PFD | FMC_PFAPR_M6PFD | FMC_PFAPR_M5PFD |
FMC_PFAPR_M4PFD | FMC_PFAPR_M3PFD | FMC_PFAPR_M2PFD |
FMC_PFAPR_M1PFD | FMC_PFAPR_M0PFD,
KINETIS_FMC_PFAPR);
/* Set clock dividers to desired value */
putreg32(SIM_CLKDIV1_OUTDIV1(div1) | SIM_CLKDIV1_OUTDIV2(div2) |
SIM_CLKDIV1_OUTDIV3(div3) | SIM_CLKDIV1_OUTDIV4(div4),
KINETIS_SIM_CLKDIV1);
/* Wait for dividers to change */
for (i = 0 ; i < div4 ; i++);
/* Re-store the saved value of FMC_PFAPR */
putreg32(regval, KINETIS_FMC_PFAPR);
}
/****************************************************************************
* Name: kinetis_pllconfig
*
* Description:
* Initialize the PLL using the settings in board.h. This assumes that
* the MCG is in default FLL Engaged Internal (FEI mode) out of reset.
*
****************************************************************************/
void kinetis_pllconfig(void)
{
uint32_t regval32;
uint8_t regval8;
/* Transition to FLL Bypassed External (FBE) mode */
#ifdef BOARD_EXTCLOCK
/* IRCS = 0 (Internal Reference Clock Select)
* LP = 0 (Low Power Select)
* EREFS = 0 (External Reference Select)
* HGO = 0 (High Gain Oscillator Select)
* RANGE = 0 (Oscillator of 32 kHz to 40 kHz)
*/
putreg8(0, KINETIS_MCG_C2);
#else
/* Enable external oscillator:
*
* IRCS = 0 (Internal Reference Clock Select)
* LP = 0 (Low Power Select)
* EREFS = 1 (External Reference Select)
* HGO = 1 (High Gain Oscillator Select)
* RANGE = 2 (Oscillator of 8 MHz to 32 MHz)
*/
putreg8(MCG_C2_EREFS | MCG_C2_HGO | MCG_C2_RANGE_VHIGH, KINETIS_MCG_C2);
#endif
/* Released latched state of oscillator and GPIO */
regval32 = getreg32(KINETIS_SIM_SCGC4);
regval32 |= SIM_SCGC4_LLWU;
putreg32(regval32, KINETIS_SIM_SCGC4);
regval8 = getreg8(KINETIS_LLWU_CS);
regval8 |= LLWU_CS_ACKISO;
putreg8(regval8, KINETIS_LLWU_CS);
/* Select external oscillator and Reference Divider and clear IREFS to
* start the external oscillator.
*
* IREFSTEN = 0 (Internal Reference Stop Enable)
* IRCLKEN = 0 (Internal Reference Clock Enable)
* IREFS = 0 (Internal Reference Select)
* FRDIV = 3 (FLL External Reference Divider, RANGE!=0 divider=256)
* CLKS = 2 (Clock Source Select, External reference clock)
*/
putreg8(MCG_C1_FRDIV_DIV256 | MCG_C1_CLKS_EXTREF, KINETIS_MCG_C1);
/* If we aren't using an oscillator input we don't need to wait for the
* oscillator to initialize
*/
#ifndef BOARD_EXTCLOCK
while ((getreg8(KINETIS_MCG_S) & MCG_S_OSCINIT) == 0);
#endif
/* Wait for Reference clock Status bit to clear */
while ((getreg8(KINETIS_MCG_S) & MCG_S_IREFST) != 0);
/* Wait for clock status bits to show that the clock source is the
* external reference clock.
*/
while ((getreg8(KINETIS_MCG_S) & MCG_S_CLKST_MASK) != MCG_S_CLKST_EXTREF);
/* We are now in FLL Bypassed External (FBE) mode. Configure PLL
* reference clock divider:
*
* PLLCLKEN = 0
* PLLSTEN = 0
* PRDIV = Determined by PLL reference clock frequency
*
* Either the external clock or crystal frequency is used to select the
* PRDIV value. Only reference clock frequencies are supported that will
* produce a 2MHz reference clock to the PLL.
*/
putreg8(MCG_C5_PRDIV(BOARD_PRDIV), KINETIS_MCG_C5);
/* Ensure that MCG_C6 is at the reset default of 0: LOLIE disabled, PLL
* disabled, clk monitor disabled, PLL VCO divider cleared.
*/
putreg8(0, KINETIS_MCG_C6);
/* Set system options dividers based on settings from the board.h file.
*
* MCG = PLL
* Core = MCG / BOARD_OUTDIV1
* bus = MCG / BOARD_OUTDIV1
* FlexBus = MCG / BOARD_OUTDIV1
* Flash clock = MCG/2 / BOARD_OUTDIV1
*/
kinesis_setdividers(BOARD_OUTDIV1, BOARD_OUTDIV2, BOARD_OUTDIV3, BOARD_OUTDIV4);
/* Set the VCO divider, VDIV, is defined in the board.h file. VDIV
* selects the amount to divide the VCO output of the PLL. The VDIV bits
* establish the multiplication factor applied to the reference clock
* frequency. Also set
*
* LOLIE = 0 (Loss of Lock Interrrupt Enable)
* PLLS = 1 (PLL Select)
* CME = 0 (Clock Monitor Enable)
*/
putreg8(MCG_C6_PLLS | MCG_C6_VDIV(BOARD_VDIV), KINETIS_MCG_C6);
/* Wait for the PLL status bit to set */
while ((getreg8(KINETIS_MCG_S) & MCG_S_PLLST) == 0);
/* Wait for the PLL LOCK bit to set */
while ((getreg8(KINETIS_MCG_S) & MCG_S_LOCK) == 0);
/* We are now running in PLL Bypassed External (PBE) mode. Transition to
* PLL Engaged External (PEE) mode by setting CLKS to 0
*/
regval8 = getreg8(KINETIS_MCG_C1);
regval8 &= ~MCG_C1_CLKS_MASK;
putreg8(regval8, KINETIS_MCG_C1);
/* Wait for clock status bits to update */
while ((getreg8(KINETIS_MCG_S) & MCG_S_CLKST_MASK) != MCG_S_CLKST_PLL);
/* We are now running in PLL Engaged External (PEE) mode. */
}
/****************************************************************************
* Name: kinetis_traceconfig
*
* Description:
* Enable trace clocks.
*
****************************************************************************/
#ifdef CONFIG_KINETIS_TRACE
static inline void kinetis_traceconfig(void)
{
uint32_t regval;
/* Set the trace clock to the core clock frequency in the SIM SOPT2 register */
regval = getreg32(KINETIS_SIM_SOPT2);
regval |= SIM_SOPT2_TRACECLKSEL;
putreg32(regval, KINETIS_SIM_SOPT2);
/* Enable the TRACE_CLKOUT pin function on the configured pin */
kinetis_gpioconfig(GPIO_TRACE_CLKOUT);
}
#else
# define kinetis_traceconfig()
#endif
/****************************************************************************
* Name: kinetis_fbconfig
*
* Description:
* Enable FlexBus clocking.
*
****************************************************************************/
#ifdef CONFIG_KINETIS_FLEXBUS
static inline void kinetis_fbconfig(void)
{
uint32_t regval;
/* Enable the clock to the FlexBus module */
regval = getreg32(KINETIS_SIM_SCGC7);
regval |= SIM_SCGC7_FLEXBUS;
putreg32(regval, KINETIS_SIM_SCGC7);
/* Enable the FB_CLKOUT function on PTC3 (alt5 function) */
kinetis_gpioconfig(GPIO_FB_CLKOUT);
}
#else
# define kinetis_fbconfig()
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: kinetis_clockconfig
*
* Description:
* Called to initialize the Kinetis chip. This does whatever setup is
* needed to put the MCU in a usable state. This includes the
* initialization of clocking using the settings in board.h.
*
****************************************************************************/
void kinetis_clockconfig(void)
{
/* Enable all of the port clocks */
kinesis_portclocks();
/* Configure the PLL based on settings in the board.h file */
kinetis_pllconfig();
/* For debugging, we will normally want to enable the trace clock and/or
* the FlexBus clock.
*/
kinetis_traceconfig();
kinetis_fbconfig();
}
/****************************************************************************
* arch/arm/src/kinetis/kinetis_clockconfig.c
* arch/arm/src/chip/kinetis_clockconfig.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "kinetis_internal.h"
#include "kinetis_mcg.h"
#include "kinetis_sim.h"
#include "kinetis_fmc.h"
#include "kinetis_llwu.h"
#include "kinetis_pinmux.h"
/****************************************************************************
* Private Definitions
****************************************************************************/
#ifndef CONFIG_BOOT_RAMFUNCS
# error "CONFIG_BOOT_RAMFUNCS must be defined for this logic"
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
void __ramfunc__
kinesis_setdividers(uint32_t div1, uint32_t div2, uint32_t div3, uint32_t div4);
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: kinesis_portclocks
*
* Description:
* Enable all of the port clocks
*
****************************************************************************/
static inline void kinesis_portclocks(void)
{
uint32_t regval;
/* Enable all of the port clocks */
regval = getreg32(KINETIS_SIM_SCGC5);
regval |= (SIM_SCGC5_PORTA | SIM_SCGC5_PORTB | SIM_SCGC5_PORTC |
SIM_SCGC5_PORTD | SIM_SCGC5_PORTE);
putreg32(regval, KINETIS_SIM_SCGC5);
}
/****************************************************************************
* Name: kinetis_pllconfig
*
* Description:
* Initialize the PLL using the settings in board.h. This assumes that
* the MCG is in default FLL Engaged Internal (FEI mode) out of reset.
*
****************************************************************************/
void kinetis_pllconfig(void)
{
uint32_t regval32;
uint8_t regval8;
/* Transition to FLL Bypassed External (FBE) mode */
#ifdef BOARD_EXTCLOCK
/* IRCS = 0 (Internal Reference Clock Select)
* LP = 0 (Low Power Select)
* EREFS = 0 (External Reference Select)
* HGO = 0 (High Gain Oscillator Select)
* RANGE = 0 (Oscillator of 32 kHz to 40 kHz)
*/
putreg8(0, KINETIS_MCG_C2);
#else
/* Enable external oscillator:
*
* IRCS = 0 (Internal Reference Clock Select)
* LP = 0 (Low Power Select)
* EREFS = 1 (External Reference Select)
* HGO = 1 (High Gain Oscillator Select)
* RANGE = 2 (Oscillator of 8 MHz to 32 MHz)
*/
putreg8(MCG_C2_EREFS | MCG_C2_HGO | MCG_C2_RANGE_VHIGH, KINETIS_MCG_C2);
#endif
/* Released latched state of oscillator and GPIO */
regval32 = getreg32(KINETIS_SIM_SCGC4);
regval32 |= SIM_SCGC4_LLWU;
putreg32(regval32, KINETIS_SIM_SCGC4);
regval8 = getreg8(KINETIS_LLWU_CS);
regval8 |= LLWU_CS_ACKISO;
putreg8(regval8, KINETIS_LLWU_CS);
/* Select external oscillator and Reference Divider and clear IREFS to
* start the external oscillator.
*
* IREFSTEN = 0 (Internal Reference Stop Enable)
* IRCLKEN = 0 (Internal Reference Clock Enable)
* IREFS = 0 (Internal Reference Select)
* FRDIV = 3 (FLL External Reference Divider, RANGE!=0 divider=256)
* CLKS = 2 (Clock Source Select, External reference clock)
*/
putreg8(MCG_C1_FRDIV_DIV256 | MCG_C1_CLKS_EXTREF, KINETIS_MCG_C1);
/* If we aren't using an oscillator input we don't need to wait for the
* oscillator to initialize
*/
#ifndef BOARD_EXTCLOCK
while ((getreg8(KINETIS_MCG_S) & MCG_S_OSCINIT) == 0);
#endif
/* Wait for Reference clock Status bit to clear */
while ((getreg8(KINETIS_MCG_S) & MCG_S_IREFST) != 0);
/* Wait for clock status bits to show that the clock source is the
* external reference clock.
*/
while ((getreg8(KINETIS_MCG_S) & MCG_S_CLKST_MASK) != MCG_S_CLKST_EXTREF);
/* We are now in FLL Bypassed External (FBE) mode. Configure PLL
* reference clock divider:
*
* PLLCLKEN = 0
* PLLSTEN = 0
* PRDIV = Determined by PLL reference clock frequency
*
* Either the external clock or crystal frequency is used to select the
* PRDIV value. Only reference clock frequencies are supported that will
* produce a 2MHz reference clock to the PLL.
*/
putreg8(MCG_C5_PRDIV(BOARD_PRDIV), KINETIS_MCG_C5);
/* Ensure that MCG_C6 is at the reset default of 0: LOLIE disabled, PLL
* disabled, clk monitor disabled, PLL VCO divider cleared.
*/
putreg8(0, KINETIS_MCG_C6);
/* Set system options dividers based on settings from the board.h file.
*
* MCG = PLL
* Core = MCG / BOARD_OUTDIV1
* bus = MCG / BOARD_OUTDIV2
* FlexBus = MCG / BOARD_OUTDIV3
* Flash clock = MCG / BOARD_OUTDIV4
*/
kinesis_setdividers(BOARD_OUTDIV1, BOARD_OUTDIV2, BOARD_OUTDIV3, BOARD_OUTDIV4);
/* Set the VCO divider, VDIV, is defined in the board.h file. VDIV
* selects the amount to divide the VCO output of the PLL. The VDIV bits
* establish the multiplication factor applied to the reference clock
* frequency. Also set
*
* LOLIE = 0 (Loss of Lock Interrrupt Enable)
* PLLS = 1 (PLL Select)
* CME = 0 (Clock Monitor Enable)
*/
putreg8(MCG_C6_PLLS | MCG_C6_VDIV(BOARD_VDIV), KINETIS_MCG_C6);
/* Wait for the PLL status bit to set */
while ((getreg8(KINETIS_MCG_S) & MCG_S_PLLST) == 0);
/* Wait for the PLL LOCK bit to set */
while ((getreg8(KINETIS_MCG_S) & MCG_S_LOCK) == 0);
/* We are now running in PLL Bypassed External (PBE) mode. Transition to
* PLL Engaged External (PEE) mode by setting CLKS to 0
*/
regval8 = getreg8(KINETIS_MCG_C1);
regval8 &= ~MCG_C1_CLKS_MASK;
putreg8(regval8, KINETIS_MCG_C1);
/* Wait for clock status bits to update */
while ((getreg8(KINETIS_MCG_S) & MCG_S_CLKST_MASK) != MCG_S_CLKST_PLL);
/* We are now running in PLL Engaged External (PEE) mode. */
}
/****************************************************************************
* Name: kinetis_traceconfig
*
* Description:
* Enable trace clocks.
*
****************************************************************************/
#ifdef CONFIG_KINETIS_TRACE
static inline void kinetis_traceconfig(void)
{
uint32_t regval;
/* Set the trace clock to the core clock frequency in the SIM SOPT2 register */
regval = getreg32(KINETIS_SIM_SOPT2);
regval |= SIM_SOPT2_TRACECLKSEL;
putreg32(regval, KINETIS_SIM_SOPT2);
/* Enable the TRACE_CLKOUT pin function on the configured pin */
kinetis_gpioconfig(GPIO_TRACE_CLKOUT);
}
#else
# define kinetis_traceconfig()
#endif
/****************************************************************************
* Name: kinetis_fbconfig
*
* Description:
* Enable FlexBus clocking.
*
****************************************************************************/
#ifdef CONFIG_KINETIS_FLEXBUS
static inline void kinetis_fbconfig(void)
{
uint32_t regval;
/* Enable the clock to the FlexBus module */
regval = getreg32(KINETIS_SIM_SCGC7);
regval |= SIM_SCGC7_FLEXBUS;
putreg32(regval, KINETIS_SIM_SCGC7);
/* Enable the FB_CLKOUT function on PTC3 (alt5 function) */
kinetis_gpioconfig(GPIO_FB_CLKOUT);
}
#else
# define kinetis_fbconfig()
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: kinetis_clockconfig
*
* Description:
* Called to initialize the Kinetis chip. This does whatever setup is
* needed to put the MCU in a usable state. This includes the
* initialization of clocking using the settings in board.h.
*
****************************************************************************/
void kinetis_clockconfig(void)
{
/* Enable all of the port clocks */
kinesis_portclocks();
/* Configure the PLL based on settings in the board.h file */
kinetis_pllconfig();
/* For debugging, we will normally want to enable the trace clock and/or
* the FlexBus clock.
*/
kinetis_traceconfig();
kinetis_fbconfig();
}
/****************************************************************************
* Name: kinesis_setdividers
*
* Description:
* "This routine must be placed in RAM. It is a workaround for errata e2448.
* Flash prefetch must be disabled when the flash clock divider is changed.
* This cannot be performed while executing out of flash. There must be a
* short delay after the clock dividers are changed before prefetch can be
* re-enabled."
*
* NOTE: This must have global scope only to prevent optimization logic from
* inlining the function.
*
****************************************************************************/
void __ramfunc__
kinesis_setdividers(uint32_t div1, uint32_t div2, uint32_t div3, uint32_t div4)
{
uint32_t regval;
int i;
/* Save the current value of the Flash Access Protection Register */
regval = getreg32(KINETIS_FMC_PFAPR);
/* Set M0PFD through M7PFD to 1 to disable prefetch */
putreg32(FMC_PFAPR_M7PFD | FMC_PFAPR_M6PFD | FMC_PFAPR_M5PFD |
FMC_PFAPR_M4PFD | FMC_PFAPR_M3PFD | FMC_PFAPR_M2PFD |
FMC_PFAPR_M1PFD | FMC_PFAPR_M0PFD,
KINETIS_FMC_PFAPR);
/* Set clock dividers to desired value */
putreg32(SIM_CLKDIV1_OUTDIV1(div1) | SIM_CLKDIV1_OUTDIV2(div2) |
SIM_CLKDIV1_OUTDIV3(div3) | SIM_CLKDIV1_OUTDIV4(div4),
KINETIS_SIM_CLKDIV1);
/* Wait for dividers to change */
for (i = 0 ; i < div4 ; i++);
/* Re-store the saved value of FMC_PFAPR */
putreg32(regval, KINETIS_FMC_PFAPR);
}

2
arch/arm/src/kinetis/kinetis_start.c
View file

@ -116,7 +116,7 @@ void __start(void)
* at _framfuncs
*/
#ifndef CONFIG_BOOT_RAMFUNCS
#ifdef CONFIG_BOOT_RAMFUNCS
for (src = &_framfuncs, dest = &_sramfuncs; dest < &_eramfuncs; )
{
*dest++ = *src++;

8
configs/kwikstik-k40/ostest/Make.defs
View file

@ -41,24 +41,24 @@ ifeq ($(CONFIG_KINETIS_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
endif
ifeq ($(CONFIG_KINETIS_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
endif
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -Os
endif

11
configs/kwikstik-k40/ostest/defconfig
View file

@ -77,15 +77,8 @@ CONFIG_ARCH_CHIP_MK40X256VLQ100=y
CONFIG_ARCH_BOARD=kwikstik-k40
CONFIG_ARCH_BOARD_KWIKSTIK_K40=y
CONFIG_BOARD_LOOPSPERMSEC=5483
CONFIG_DRAM_SIZE=0x18000000
CONFIG_DRAM_START=0x00008000
# define KINETIS_SRAML_BASE 0x18000000 /* –0x1fffffff SRAM_L: Lower SRAM
# define KINETIS_FLASH_SIZE (256*1024) /* 256Kb */
# define KINETIS_FLEXMEM_SIZE (256*1024) /* 256Kb */
# define KINETIS_SRAM_SIZE (64*1024) /* 32Kb */
CONFIG_DRAM_START=0x1fff8000
CONFIG_DRAM_SIZE= 0x00010000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_INTERRUPTSTACK=n

46
configs/kwikstik-k40/ostest/ld.script
View file

@ -34,22 +34,42 @@
****************************************************************************/
/* The K40X256VLQ100 has 256Kb of FLASH beginning at address 0x0000:0000 and
* 32Kb of SRAM beginning at address 0x1800:0000.
* 64Kb of SRAM beginning at address 0x1800:0000 (SRAM_L) and 0x2000:000
* (SRAM_U).
*
* NOTE: that the first part of the K40 FLASH region is reserved for
* interrupt vectflash and, following that, is a region from 0x0000:0400
* to 0x0000:040f that is reserved for the FLASH control fields (FCF).
*
* NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is
* also implemented such that the SRAM_L and SRAM_U ranges form a
* contiguous block in the memory map.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K
sram (rwx) : ORIGIN = 0x18000000, LENGTH = 32K
vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 1K - 16
cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16
progflash (rx) : ORIGIN = 0x00000800, LENGTH = 256K - 2K
datasram (rwx) : ORIGIN = 0x1fff8000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.vectors : {
_svectors = ABSOLUTE(.);
*(.vectors)
_evectors = ABSOLUTE(.);
} > vectflash
.cfmprotect : {
*(.cfmconfig)
} > cfmprotect
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
@ -61,7 +81,7 @@ SECTIONS
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
} > progflash
.data : {
_sdata = ABSOLUTE(.);
@ -69,26 +89,26 @@ SECTIONS
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
} > datasram AT > progflash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(4): {
_sramfunc_begin = . ;
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfunc_end = . ;
} > sram AT > flash
_eramfuncs = ABSOLUTE(.);
} > datasram AT > progflash
_framfunc = LOADADDR(.ramfunc);
_framfuncs = LOADADDR(.ramfunc);
.ARM.extab : {
*(.ARM.extab*)
} >sram
} > datasram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
} > datasram
__exidx_end = ABSOLUTE(.);
.bss : {
@ -97,7 +117,7 @@ SECTIONS
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
} > datasram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }

8
configs/twr-k60n512/ostest/Make.defs
View file

@ -41,24 +41,24 @@ ifeq ($(CONFIG_KINETIS_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
endif
ifeq ($(CONFIG_KINETIS_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_KINETIS_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -mfloat-abi=soft -mlong-calls
endif
ifeq ($(CONFIG_KINETIS_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft -mlong-calls
MAXOPTIMIZATION = -Os
endif

4
configs/twr-k60n512/ostest/defconfig
View file

@ -77,8 +77,8 @@ CONFIG_ARCH_CHIP_MK60N512VMD100=y
CONFIG_ARCH_BOARD=twr-k60n512
CONFIG_ARCH_BOARD_TWR_K60N512=y
CONFIG_BOARD_LOOPSPERMSEC=5483
CONFIG_DRAM_SIZE=0x18000000
CONFIG_DRAM_START=0x00020000
CONFIG_DRAM_START=0x1fff0000
CONFIG_DRAM_SIZE=0x00020000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_INTERRUPTSTACK=n

46
configs/twr-k60n512/ostest/ld.script
View file

@ -34,22 +34,42 @@
****************************************************************************/
/* The K60N512VMD100 has 512Kb of FLASH beginning at address 0x0000:0000 and
* 128Kb of SRAM beginning at address 0x1800:0000.
* 128Kb of SRAM beginning at address 0x1800:0000 (SRAM_L) and 0x2000:000
* (SRAM_U).
*
* NOTE: that the first part of the K40 FLASH region is reserved for
* interrupt vectflash and, following that, is a region from 0x0000:0400
* to 0x0000:040f that is reserved for the FLASH control fields (FCF).
*
* NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is
* also implemented such that the SRAM_L and SRAM_U ranges form a
* contiguous block in the memory map.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x18000000, LENGTH = 128K
vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 1K - 16
cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16
progflash (rx) : ORIGIN = 0x00000800, LENGTH = 512K - 2K
datasram (rwx) : ORIGIN = 0x1fff0000, LENGTH = 128K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.vectors : {
_svectors = ABSOLUTE(.);
*(.vectors)
_evectors = ABSOLUTE(.);
} > vectflash
.cfmprotect : {
*(.cfmconfig)
} > cfmprotect
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
@ -61,7 +81,7 @@ SECTIONS
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
} > progflash
.data : {
_sdata = ABSOLUTE(.);
@ -69,26 +89,26 @@ SECTIONS
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
} > datasram AT > progflash
_eronly = LOADADDR(.data);
.ramfunc ALIGN(4): {
_sramfunc_begin = . ;
_sramfuncs = ABSOLUTE(.);
*(.ramfunc .ramfunc.*)
_eramfunc_end = . ;
} > sram AT > flash
_eramfuncs = ABSOLUTE(.);
} > datasram AT > progflash
_framfunc = LOADADDR(.ramfunc);
_framfuncs = LOADADDR(.ramfunc);
.ARM.extab : {
*(.ARM.extab*)
} >sram
} > datasram
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} >sram
} > datasram
__exidx_end = ABSOLUTE(.);
.bss : {
@ -97,7 +117,7 @@ SECTIONS
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
} > datasram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }