Aksal/nuttx
3
1
Fork 1
mirror of https://github.com/apache/nuttx.git synced 2026-08-12 16:06:51 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

Add support for the STM3220G-EVAL board

Browse source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4472 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-03-10 00:15:45 +00:00
parent 913221f7db
commit 3d89134bd2
53 changed files with 23288 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

738
configs/stm3220g-eval/README.txt Normal file
View file

@ -0,0 +1,738 @@
README
======
This README discusses issues unique to NuttX configurations for the
STMicro STM32140G-EVAL development board.
Contents
========
- Development Environment
- GNU Toolchain Options
- IDEs
- NuttX buildroot Toolchain
- STM3220G-EVAL-specific Configuration Options
- LEDs
- Ethernet
- PWM
- CAN
- Configurations
Development Environment
=======================
Either Linux or Cygwin on Windows can be used for the development environment.
The source has been built only using the GNU toolchain (see below). Other
toolchains will likely cause problems. Testing was performed using the Cygwin
environment because the Raisonance R-Link emulatator and some RIDE7 development tools
were used and those tools works only under Windows.
GNU Toolchain Options
=====================
The NuttX make system has been modified to support the following different
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The devkitARM GNU toolchain,
3. Raisonance GNU toolchain, or
4. The NuttX buildroot Toolchain (see below).
All testing has been conducted using the CodeSourcery toolchain for Windows. To use
the devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
add one of the following configuration options to your .config (or defconfig)
file:
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
If you change the default toolchain, then you may also have to modify the PATH in
the setenv.h file if your make cannot find the tools.
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
performed automatically in the Cygwin makefiles using the 'cygpath' utility
but you might easily find some new path problems. If so, check out 'cygpath -w'
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
are used in Nuttx (e.g., include/arch). The make system works around these
problems for the Windows tools by copying directories instead of linking them.
But this can also cause some confusion for you: For example, you may edit
a file in a "linked" directory and find that your changes had no effect.
That is because you are building the copy of the file in the "fake" symbolic
directory. If you use a Windows toolchain, you should get in the habit of
making like this:
make clean_context all
An alias in your .bashrc file might make that less painful.
3. Dependencies are not made when using Windows versions of the GCC. This is
because the dependencies are generated using Windows pathes which do not
work with the Cygwin make.
Support has been added for making dependencies with the windows-native toolchains.
That support can be enabled by modifying your Make.defs file as follows:
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
-Os.
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
path or will get the wrong version of make.
IDEs
====
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project.
Makefile Build
--------------
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
simply use the NuttX makefile to build the system. That is almost for free
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
there is a lot of help on the internet).
Native Build
------------
Here are a few tips before you start that effort:
1) Select the toolchain that you will be using in your .config file
2) Start the NuttX build at least one time from the Cygwin command line
before trying to create your project. This is necessary to create
certain auto-generated files and directories that will be needed.
3) Set up include pathes: You will need include/, arch/arm/src/stm32,
arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
4) All assembly files need to have the definition option -D __ASSEMBLY__
on the command line.
Startup files will probably cause you some headaches. The NuttX startup file
is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX
one time from the Cygwin command line in order to obtain the pre-built
startup object needed by RIDE.
NuttX buildroot Toolchain
=========================
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
different from the default in your PATH variable).
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh stm3220g-eval/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/cortexm3-defconfig-4.3.3 .config
6. make oldconfig
7. make
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly built binaries.
See the file configs/README.txt in the buildroot source tree. That has more
detailed PLUS some special instructions that you will need to follow if you are
building a Cortex-M3 toolchain for Cygwin under Windows.
Ethernet
========
The Ethernet driver is configured to use the MII interface:
Board Jumper Settings:
Jumper Description
JP8 To enable MII, JP8 should not be fitted.
JP6 2-3: Enable MII interface mode
JP5 2-3: Provide 25 MHz clock for MII or 50 MHz clock for RMII by MCO at PA8
SB1 Not used with MII
LEDs
====
The STM3220G-EVAL board has four LEDs labeled LD1, LD2, LD3 and LD4 on the
board.. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
defined. In that case, the usage by the board port is defined in
include/board.h and src/up_leds.c. The LEDs are used to encode OS-related\
events as follows:
SYMBOL Meaning LED1* LED2 LED3 LED4
------------------- ----------------------- ------- ------- ------- ------
LED_STARTED NuttX has been started ON OFF OFF OFF
LED_HEAPALLOCATE Heap has been allocated OFF ON OFF OFF
LED_IRQSENABLED Interrupts enabled ON ON OFF OFF
LED_STACKCREATED Idle stack created OFF OFF ON OFF
LED_INIRQ In an interrupt** ON N/C N/C OFF
LED_SIGNAL In a signal handler*** N/C ON N/C OFF
LED_ASSERTION An assertion failed ON ON N/C OFF
LED_PANIC The system has crashed N/C N/C N/C ON
LED_IDLE STM32 is is sleep mode (Optional, not used)
* If LED1, LED2, LED3 are statically on, then NuttX probably failed to boot
and these LEDs will give you some indication of where the failure was
** The normal state is LED3 ON and LED1 faintly glowing. This faint glow
is because of timer interupts that result in the LED being illuminated
on a small proportion of the time.
*** LED2 may also flicker normally if signals are processed.
PWM
===
The STM3220G-Eval has no real on-board PWM devices, but the board can be
configured to output a pulse train using timer output pins. The following
pins have been use to generate PWM output (see board.h for some other
candidates):
TIM4 CH2. Pin PD13 is used by the FSMC (FSMC_A18) and is also connected
to the Motor Control Connector (CN5) just for this purpose. If FSMC is
not enabled, then FSMC_A18 will not be used (and will be tri-stated from
the LCD).
CONFIGURATION:
CONFIG_STM32_TIM4=y
CONFIG_PWM=n
CONFIG_PWM_PULSECOUNT=n
CONFIG_STM32_TIM4_PWM=y
CONFIG_STM32_TIM4_CHANNEL=2
ACCESS:
Daughterboard Extension Connector, CN3, pin 32
Ground is available on CN3, pin1
NOTE: TIM4 hardware will not support pulse counting.
TIM8 CH4: Pin PC9 is used by the microSD card (MicroSDCard_D1) and I2S
(I2S_CKIN) but can be completely disconnected from both by opening JP16.
CONFIGURATION:
CONFIG_STM32_TIM8=y
CONFIG_PWM=n
CONFIG_PWM_PULSECOUNT=y
CONFIG_STM32_TIM8_PWM=y
CONFIG_STM32_TIM8_CHANNEL=4
ACCESS:
Daughterboard Extension Connector, CN3, pin 17
Ground is available on CN3, pin1
CAN
===
Connector 10 (CN10) is DB-9 male connector that can be used with CAN1 or CAN2.
JP10 connects CAN1_RX or CAN2_RX to the CAN transceiver
JP3 connects CAN1_TX or CAN2_TX to the CAN transceiver
CAN signals are then available on CN10 pins:
CN10 Pin 7 = CANH
CN10 Pin 2 = CANL
Mapping to STM32 GPIO pins:
PD0 = FSMC_D2 & CAN1_RX
PD1 = FSMC_D3 & CAN1_TX
PB13 = ULPI_D6 & CAN2_TX
PB5 = ULPI_D7 & CAN2_RX
Configuration Options:
CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
CONFIG_STM32_CAN2 must also be defined)
CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default
Standard 11-bit IDs.
CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
Default: 8
CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
Default: 4
CONFIG_STM32_CAN1 - Enable support for CAN1
CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined.
CONFIG_STM32_CAN2 - Enable support for CAN2
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
dump of all CAN registers.
STM3220G-EVAL-specific Configuration Options
============================================
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=arm
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=stm32
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP_STM32F207IG=y
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
configuration features.
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=stm3220g_eval (for the STM3220G-EVAL development board)
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_STM3220G_EVAL=y
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
CONFIG_DRAM_SIZE=0x00010000 (64Kb)
CONFIG_DRAM_START - The start address of installed DRAM
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_END - Last address+1 of installed RAM
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO - The STM3220xxx supports interrupt prioritization
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
Individual subsystems can be enabled:
AHB1
----
CONFIG_STM32_CRC
CONFIG_STM32_BKPSRAM
CONFIG_STM32_CCMDATARAM
CONFIG_STM32_DMA1
CONFIG_STM32_DMA2
CONFIG_STM32_ETHMAC
CONFIG_STM32_OTGHS
AHB2
----
CONFIG_STM32_DCMI
CONFIG_STM32_CRYP
CONFIG_STM32_HASH
CONFIG_STM32_RNG
CONFIG_STM32_OTGFS
AHB3
----
CONFIG_STM32_FSMC
APB1
----
CONFIG_STM32_TIM2
CONFIG_STM32_TIM3
CONFIG_STM32_TIM4
CONFIG_STM32_TIM5
CONFIG_STM32_TIM6
CONFIG_STM32_TIM7
CONFIG_STM32_TIM12
CONFIG_STM32_TIM13
CONFIG_STM32_TIM14
CONFIG_STM32_WWDG
CONFIG_STM32_SPI2
CONFIG_STM32_SPI3
CONFIG_STM32_USART2
CONFIG_STM32_USART3
CONFIG_STM32_UART4
CONFIG_STM32_UART5
CONFIG_STM32_I2C1
CONFIG_STM32_I2C2
CONFIG_STM32_I2C3
CONFIG_STM32_CAN1
CONFIG_STM32_CAN2
CONFIG_STM32_DAC1
CONFIG_STM32_DAC2
CONFIG_STM32_PWR -- Required for RTC
APB2
----
CONFIG_STM32_TIM1
CONFIG_STM32_TIM8
CONFIG_STM32_USART1
CONFIG_STM32_USART6
CONFIG_STM32_ADC1
CONFIG_STM32_ADC2
CONFIG_STM32_ADC3
CONFIG_STM32_SDIO
CONFIG_STM32_SPI1
CONFIG_STM32_SYSCFG
CONFIG_STM32_TIM9
CONFIG_STM32_TIM10
CONFIG_STM32_TIM11
Timer and I2C devices may need to the following to force power to be applied
unconditionally at power up. (Otherwise, the device is powered when it is
initialized).
CONFIG_STM32_FORCEPOWER
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn
is defined (as above) then the following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation, ADC conversion,
or DAC conversion. Note that ADC/DAC require two definition: Not only do you have
to assign the timer (n) for used by the ADC or DAC, but then you also have to
configure which ADC or DAC (m) it is assigned to.
CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,14
CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,14
CONFIG_STM32_TIMn_ADCm Reserve timer n to trigger ADCm, n=1,..,14, m=1,..,3
CONFIG_STM32_TIMn_DAC Reserve timer n for use by DAC, n=1,..,14
CONFIG_STM32_TIMn_DACm Reserve timer n to trigger DACm, n=1,..,14, m=1,..,2
For each timer that is enabled for PWM usage, we need the following additional
configuration settings:
CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
NOTE: The STM32 timers are each capable of generating different signals on
each of the four channels with different duty cycles. That capability is
not supported by this driver: Only one output channel per timer.
JTAG Enable settings (by default JTAG-DP and SW-DP are disabled):
CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
but without JNTRST.
CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
STM3220xxx specific device driver settings
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
m (m=4,5) for the console and ttys0 (default is the USART1).
CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_2STOP - Two stop bits
CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
support. Non-interrupt-driven, poll-waiting is recommended if the
interrupt rate would be to high in the interrupt driven case.
CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO
and CONFIG_STM32_DMA2.
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
Default: Medium
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
CONFIG_STM32_PHYADDR - The 5-bit address of the PHY on the board
CONFIG_STM32_MII - Support Ethernet MII interface
CONFIG_STM32_MII_MCO1 - Use MCO1 to clock the MII interface
CONFIG_STM32_MII_MCO2 - Use MCO2 to clock the MII interface
CONFIG_STM32_RMII - Support Ethernet RMII interface
CONFIG_STM32_AUTONEG - Use PHY autonegotion to determine speed and mode
CONFIG_STM32_ETHFD - If CONFIG_STM32_AUTONEG is not defined, then this
may be defined to select full duplex mode. Default: half-duplex
CONFIG_STM32_ETH100MBPS - If CONFIG_STM32_AUTONEG is not defined, then this
may be defined to select 100 MBps speed. Default: 10 Mbps
CONFIG_STM32_PHYSR - This must be provided if CONFIG_STM32_AUTONEG is
defined. The PHY status register address may diff from PHY to PHY. This
configuration sets the address of the PHY status register.
CONFIG_STM32_PHYSR_SPEED - This must be provided if CONFIG_STM32_AUTONEG is
defined. This provides bit mask indicating 10 or 100MBps speed.
CONFIG_STM32_PHYSR_100MBPS - This must be provided if CONFIG_STM32_AUTONEG is
defined. This provides the value of the speed bit(s) indicating 100MBps speed.
CONFIG_STM32_PHYSR_MODE - This must be provided if CONFIG_STM32_AUTONEG is
defined. This provide bit mask indicating full or half duplex modes.
CONFIG_STM32_PHYSR_FULLDUPLEX - This must be provided if CONFIG_STM32_AUTONEG is
defined. This provides the value of the mode bits indicating full duplex mode.
CONFIG_STM32_ETH_PTP - Precision Time Protocol (PTP). Not supported
but some hooks are indicated with this condition.
STM3220G-EVAL CAN Configuration
CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
CONFIG_STM32_CAN2 must also be defined)
CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
Default: 8
CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
Default: 4
CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
mode for testing. The STM32 CAN driver does support loopback mode.
CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined.
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
dump of all CAN registers.
STM3220G-EVAL LCD Hardware Configuration
Configurations
==============
Each STM3220G-EVAL configuration is maintained in a sudirectory and
can be selected as follow:
cd tools
./configure.sh stm3220g-eval/<subdir>
cd -
. ./setenv.sh
Where <subdir> is one of the following:
dhcpd:
-----
This builds the DCHP server using the apps/examples/dhcpd application
(for execution from FLASH.) See apps/examples/README.txt for information
about the dhcpd example. The server address is 10.0.0.1 and it serves
IP addresses in the range 10.0.0.2 through 10.0.0.17 (all of which, of
course, are configurable).
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
nettest:
-------
This configuration directory may be used to verify networking performance
using the STM32's Ethernet controller. It uses apps/examples/nettest to excercise the
TCP/IP network.
CONFIG_EXAMPLE_NETTEST_SERVER=n : Target is configured as the client
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=y : Only network performance is verified.
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) : Target side is IP: 10.0.0.2
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host side is IP: 10.0.0.1
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) : Server address used by which ever is client.
nsh:
---
Configures the NuttShell (nsh) located at apps/examples/nsh. The
Configuration enables both the serial and telnet NSH interfaces.
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_NSH_DHCPC=n : DHCP is disabled
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
NOTES:
1. This example assumes that a network is connected. During its
initialization, it will try to negotiate the link speed. If you have
no network connected when you reset the board, there will be a long
delay (maybe 30 seconds?) before anything happens. That is the timeout
before the networking finally gives up and decides that no network is
available.
2. This example supports the ADC test (apps/examples/adc) but this must
be manually enabled by selecting:
CONFIG_ADC=y : Enable the generic ADC infrastructure
CONFIG_STM32_ADC3=y : Enable ADC3
CONFIG_STM32_TIM1=y : Enable Timer 1
CONFIG_STM32_TIM1_ADC=y : Indicate that timer 1 will be used to trigger an ADC
CONFIG_STM32_TIM1_ADC3=y : Assign timer 1 to drive ADC3 sampling
CONFIG_STM32_ADC3_SAMPLE_FREQUENCY=100 : Select a sampling frequency
See also apps/examples/README.txt
General debug for analog devices (ADC/DAC):
CONFIG_DEBUG_ANALOG
3. This example supports the PWM test (apps/examples/pwm) but this must
be manually enabled by selecting eeither
CONFIG_PWM=y : Enable the generic PWM infrastructure
CONFIG_PWM_PULSECOUNT=n : Disable to support for TIM1/8 pulse counts
CONFIG_STM32_TIM4=y : Enable TIM4
CONFIG_STM32_TIM4_PWM=y : Use TIM4 to generate PWM output
CONFIG_STM32_TIM4_CHANNEL=2 : Select output on TIM4, channel 2
If CONFIG_STM32_FSMC is disabled, output will appear on CN3, pin 32.
Ground is available on CN3, pin1.
Or..
CONFIG_PWM=y : Enable the generic PWM infrastructure
CONFIG_PWM_PULSECOUNT=y : Enable to support for TIM1/8 pulse counts
CONFIG_STM32_TIM8=y : Enable TIM8
CONFIG_STM32_TIM8_PWM=y : Use TIM8 to generate PWM output
CONFIG_STM32_TIM8_CHANNEL=4 : Select output on TIM8, channel 4
If CONFIG_STM32_FSMC is disabled, output will appear on CN3, pin 17
Ground is available on CN23 pin1.
See also include/board.h and apps/examples/README.txt
Special PWM-only debug options:
CONFIG_DEBUG_PWM
4. This example supports the CAN loopback test (apps/examples/can) but this
must be manually enabled by selecting:
CONFIG_CAN=y : Enable the generic CAN infrastructure
CONFIG_CAN_EXID=y or n : Enable to support extended ID frames
CONFIG_STM32_CAN1=y : Enable CAN1
CONFIG_CAN_LOOPBACK=y : Enable CAN loopback mode
See also apps/examples/README.txt
Special CAN-only debug options:
CONFIG_DEBUG_CAN
CONFIG_CAN_REGDEBUG
5. This example can support an FTP client. In order to build in FTP client
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += examples/ftpc
6. This example can support an FTP server. In order to build in FTP server
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
#CONFIGURED_APPS += netutils/ftpd
#CONFIGURED_APPS += examples/ftpd
And enable poll() support in the NuttX configuration file:
CONFIG_DISABLE_POLL=n
7. This configuration requires that jumper JP22 be set to enable RS-232 operation.
nsh2:
-----
This is an alternaitve NSH configuration. One limitation of the STM3220G-EVAL
board is that you cannot have both a UART-based NSH console and SDIO support.
The nsh2 differs from the nsh configuration in the following ways:
-CONFIG_STM32_USART3=y : USART3 is disabled
+ CONFIG_STM32_USART3=n
-CONFIG_STM32_SDIO=n : SDIO is enabled
+CONFIG_STM32_SDIO=y
Logically, that is the only difference: This configuration has SDIO (and
the SD card) enabled and the serial console disabled. There is ONLY a
Telnet console!.
There are some special settings to make life with only a Telnet
CONFIG_SYSLOG=y - Enables the System Logging feature.
CONFIG_RAMLOG=y - Enable the RAM-based logging feature.
CONFIG_RAMLOG_CONSOLE=y - Use the RAM logger as the default console.
This means that any console output from non-Telnet threads will
go into the circular buffer in RAM.
CONFIG_RAMLOG_SYSLOG - This enables the RAM-based logger as the
system logger. This means that (1) in addition to the console
output from other tasks, ALL of the debug output will also to
to the circular buffer in RAM, and (2) NSH will now support a
command called 'dmesg' that can be used to dump the RAM log.
There are a few other configuration differences as necessary to support
this different device configuration. Just the do the 'diff' if you are
curious.
NOTES:
1. See the notes for the nsh configuration. Most also apply to the nsh2
configuration.
2. RS-232 is disabled, but Telnet is still available for use as a console.
3. This configuration requires that jumper JP22 be set to enable SDIO operation.
ostest:
------
This configuration directory, performs a simple OS test using
examples/ostest. By default, this project assumes that you are
using the DFU bootloader.
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
telnetd:
--------
A simple test of the Telnet daemon(see apps/netutils/README.txt,
apps/examples/README.txt, and apps/examples/telnetd). This is
the same daemon that is used in the nsh configuration so if you
use NSH, then you don't care about this. This test is good for
testing the Telnet daemon only because it works in a simpler
environment than does the nsh configuration.

170
configs/stm3220g-eval/dhcpd/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/dhcpd/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

43
configs/stm3220g-eval/dhcpd/appconfig Normal file
View file

@ -0,0 +1,43 @@
############################################################################
# configs/stm3220g-eval/dhcpd/appconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/dhcpd
# Networking support
CONFIGURED_APPS += netutils/dhcpd
CONFIGURED_APPS += netutils/uiplib

1254
configs/stm3220g-eval/dhcpd/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1257
configs/stm3220g-eval/dhcpd/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/dhcpd/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/dhcpd/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/dhcpd/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3220g-eval/dhcpd/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

505
configs/stm3220g-eval/include/board.h Normal file
View file

@ -0,0 +1,505 @@
/************************************************************************************
* configs/stm3220g-eval/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2011-12 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdio.h"
#include "stm32_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* Four clock sources are available on STM3220G-EVAL evaluation board for
* STM32F207IGH6 and RTC embedded:
*
* X1, 25 MHz crystal for ethernet PHY with socket. It can be removed when clock is
* provided by MCO pin of the MCU
* X2, 26 MHz crystal for USB OTG HS PHY
* X3, 32 kHz crystal for embedded RTC
* X4, 25 MHz crystal with socket for STM32F207IGH6 microcontroller (It can be removed
* from socket when internal RC clock is used.)
*
* This is the "standard" configuration as set up by arch/arm/src/stm32f40xx_rcc.c:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 25000000 (STM32_BOARD_XTAL)
* PLLM : 25 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PPQ)
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
* Flash Latency(WS) : 5
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - On-board crystal frequency is 25MHz
* LSE - 32.768 kHz
*/
#define STM32_BOARD_XTAL 25000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (25,000,000 / 25) * 336
* = 336,000,000
* SYSCLK = PLL_VCO / PLLP
* = 336,000,000 / 2 = 168,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 48,000,000
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PPQ RCC_PLLCFG_PLLQ(7)
#define STM32_SYSCLK_FREQUENCY 168000000ul
/* AHB clock (HCLK) is SYSCLK (168MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY
#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
*
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* Ethernet *************************************************************************/
/* We need to provide clocking to the MII PHY via MCO1 (PA8) */
#if defined(CONFIG_NET) && defined(CONFIG_STM32_ETHMAC)
# if !defined(CONFIG_STM32_MII)
# warning "CONFIG_STM32_MII required for Ethernet"
# elif !defined(CONFIG_STM32_MII_MCO1)
# warning "CONFIG_STM32_MII_MCO1 required for Ethernet MII"
# else
/* Output HSE clock (25MHz) on MCO1 pin (PA8) to clock the PHY */
# define BOARD_CFGR_MC01_SOURCE RCC_CFGR_MCO1_HSE
# define BOARD_CFGR_MC01_DIVIDER RCC_CFGR_MCO1PRE_NONE
# endif
#endif
/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
* way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with stm32_setled() */
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_LED4 3
#define BOARD_NLEDS 4
/* LED bits for use with stm32_setleds() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
#define BOARD_LED4_BIT (1 << BOARD_LED4)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
* STM3220G-EVAL. The following definitions describe how NuttX controls the LEDs:
*/
#define LED_STARTED 0 /* LED1 */
#define LED_HEAPALLOCATE 1 /* LED2 */
#define LED_IRQSENABLED 2 /* LED1 + LED2 */
#define LED_STACKCREATED 3 /* LED3 */
#define LED_INIRQ 4 /* LED1 + LED3 */
#define LED_SIGNAL 5 /* LED2 + LED3 */
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
#define LED_PANIC 7 /* N/C + N/C + N/C + LED4 */
/* Button definitions ***************************************************************/
/* The STM3220G-EVAL supports three buttons: */
#define BUTTON_WAKEUP 0
#define BUTTON_TAMPER 1
#define BUTTON_USER 2
#define NUM_BUTTONS 3
#define BUTTON_WAKEUP_BIT (1 << BUTTON_WAKEUP)
#define BUTTON_TAMPER_BIT (1 << BUTTON_TAMPER)
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/* Alternate function pin selections ************************************************/
/* UART3:
*
* - PC11 is MicroSDCard_D3 & RS232/IrDA_RX (JP22 open)
* - PC10 is MicroSDCard_D2 & RSS232/IrDA_TX
*/
#define GPIO_USART3_RX GPIO_USART3_RX_2
#define GPIO_USART3_TX GPIO_USART3_TX_2
/* Ethernet:
*
* - PA2 is ETH_MDIO
* - PC1 is ETH_MDC
* - PB5 is ETH_PPS_OUT
* - PH2 is ETH_MII_CRS
* - PH3 is ETH_MII_COL
* - PI10 is ETH_MII_RX_ER
* - PH6 is ETH_MII_RXD2
* - PH7 is ETH_MII_RXD3
* - PC3 is ETH_MII_TX_CLK
* - PC2 is ETH_MII_TXD2
* - PB8 is ETH_MII_TXD3
* - PA1 is ETH_MII_RX_CLK/ETH_RMII_REF_CLK
* - PA7 is ETH_MII_RX_DV/ETH_RMII_CRS_DV
* - PC4 is ETH_MII_RXD0/ETH_RMII_RXD0
* - PC5 is ETH_MII_RXD1/ETH_RMII_RXD1
* - PG11 is ETH_MII_TX_EN/ETH_RMII_TX_EN
* - PG13 is ETH_MII_TXD0/ETH_RMII_TXD0
* - PG14 is ETH_MII_TXD1/ETH_RMII_TXD1
*/
#define GPIO_ETH_PPS_OUT GPIO_ETH_PPS_OUT_1
#define GPIO_ETH_MII_CRS GPIO_ETH_MII_CRS_2
#define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_2
#define GPIO_ETH_MII_RX_ER GPIO_ETH_MII_RX_ER_2
#define GPIO_ETH_MII_RXD2 GPIO_ETH_MII_RXD2_2
#define GPIO_ETH_MII_RXD3 GPIO_ETH_MII_RXD3_2
#define GPIO_ETH_MII_TXD3 GPIO_ETH_MII_TXD3_1
#define GPIO_ETH_MII_TX_EN GPIO_ETH_MII_TX_EN_2
#define GPIO_ETH_MII_TXD0 GPIO_ETH_MII_TXD0_2
#define GPIO_ETH_MII_TXD1 GPIO_ETH_MII_TXD1_2
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
/* PWM
*
* The STM3220G-Eval has no real on-board PWM devices, but the board can be
* configured to output a pulse train using the following:
*
* If FSMC is not used:
* TIM4 CH2OUT: PD13 FSMC_A18 / MC_TIM4_CH2OUT
* Daughterboard Extension Connector, CN3, pin 32
* Motor Control Connector CN15, pin 33 -- not available unless you bridge SB14.
*
* TIM1 CH1OUT: PE9 FSMC_D6
* Daughterboard Extension Connector, CN2, pin 24
*
* TIM1_CH2OUT: PE11 FSMC_D8
* Daughterboard Extension Connector, CN2, pin 26
*
* TIM1_CH3OUT: PE13 FSMC_D10
* Daughterboard Extension Connector, CN2, pin 28
*
* TIM1_CH4OUT: PE14 FSMC_D11
* Daughterboard Extension Connector, CN2, pin 29
*
* If OTG FS is not used
*
* TIM1_CH3OUT: PA10 OTG_FS_ID
* Daughterboard Extension Connector, CN3, pin 14
*
* TIM1_CH4OUT: PA11 OTG_FS_DM
* Daughterboard Extension Connector, CN3, pin 11
*
* If DMCI is not used
*
* TIM8 CH1OUT: PI5 DCMI_VSYNC & MC
* Daughterboard Extension Connector, CN4, pin 4
*
* TIM8_CH2OUT: PI6 DCMI_D6 & MC
* Daughterboard Extension Connector, CN4, pin 3
*
* TIM8_CH3OUT: PI7 DCMI_D7 & MC
* Daughterboard Extension Connector, CN4, pin 2
*
* If SDIO is not used
*
* TIM8_CH3OUT: PC8 MicroSDCard_D0 & MC
* Daughterboard Extension Connector, CN3, pin 18
*
* TIM8_CH4OUT: PC9 MicroSDCard_D1 & I2S_CKIN (Need JP16 open)
* Daughterboard Extension Connector, CN3, pin 17
*
* Others
*
* TIM8 CH1OUT: PC6 I2S_MCK & Smartcard_IO (JP21 open)
*/
#if !defined(CONFIG_STM32_FSMC)
# define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2
# define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2
# define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2
# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2
# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_2
#elif !defined(CONFIG_STM32_OTGFS)
# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1
# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_1
#endif
#if !defined(CONFIG_STM32_DCMI)
# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_2
# define GPIO_TIM8_CH2OUT GPIO_TIM8_CH2OUT_2
# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_2
#else
# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_1
# if !defined(CONFIG_STM32_SDIO)
# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_1
# endif
#endif
#if !defined(CONFIG_STM32_SDIO)
# define GPIO_TIM8_CH4OUT GPIO_TIM8_CH4OUT_1
#endif
/* CAN
*
* Connector 10 (CN10) is DB-9 male connector that can be used with CAN1 or CAN2.
*
* JP10 connects CAN1_RX or CAN2_RX to the CAN transceiver
* JP3 connects CAN1_TX or CAN2_TX to the CAN transceiver
*
* CAN signals are then available on CN10 pins:
*
* CN10 Pin 7 = CANH
* CN10 Pin 2 = CANL
*
* Mapping to STM32 GPIO pins:
*
* PD0 = FSMC_D2 & CAN1_RX
* PD1 = FSMC_D3 & CAN1_TX
* PB13 = ULPI_D6 & CAN2_TX
* PB5 = ULPI_D7 & CAN2_RX
*/
#define GPIO_CAN1_RX GPIO_CAN1_RX_3
#define GPIO_CAN1_TX GPIO_CAN1_TX_3
#define GPIO_CAN2_RX GPIO_CAN2_RX_2
#define GPIO_CAN2_TX GPIO_CAN2_TX_1
/* I2C. Only I2C1 is available on the STM3220G-EVAL. I2C1_SCL and I2C1_SDA are
* available on the following pins:
*
* - PB6 is I2C1_SCL
* - PB9 is I2C1_SDA
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void stm32_boardinitialize(void);
/************************************************************************************
* Name: stm32_ledinit, stm32_setled, and stm32_setleds
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
* CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
* control the LEDs from user applications.
*
************************************************************************************/
#ifndef CONFIG_ARCH_LEDS
EXTERN void stm32_ledinit(void);
EXTERN void stm32_setled(int led, bool ledon);
EXTERN void stm32_setleds(uint8_t ledset);
#endif
/************************************************************************************
* Button support.
*
* Description:
* up_buttoninit() must be called to initialize button resources. After
* that, up_buttons() may be called to collect the current state of all
* buttons or up_irqbutton() may be called to register button interrupt
* handlers.
*
* After up_buttoninit() has been called, up_buttons() may be called to
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
* with each bit associated with a button. See the BUTTON_*_BIT
* definitions in board.h for the meaning of each bit.
*
* up_irqbutton() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BUTTON_* definitions in board.h for the meaning of enumeration
* value. The previous interrupt handler address is returned (so that it may
* restored, if so desired).
*
************************************************************************************/
#ifdef CONFIG_ARCH_BUTTONS
EXTERN void up_buttoninit(void);
EXTERN uint8_t up_buttons(void);
#ifdef CONFIG_ARCH_IRQBUTTONS
EXTERN xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
#endif
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

170
configs/stm3220g-eval/nettest/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/nettest/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

42
configs/stm3220g-eval/nettest/appconfig Normal file
View file

@ -0,0 +1,42 @@
############################################################################
# configs/nettest/nettest/appconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nettest
# Networking support
CONFIGURED_APPS += netutils/uiplib

1247
configs/stm3220g-eval/nettest/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1250
configs/stm3220g-eval/nettest/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/nettest/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/nettest/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/nettest/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3220g-eval/nettest/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

170
configs/stm3220g-eval/nsh/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/nsh/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

85
configs/stm3220g-eval/nsh/appconfig Normal file
View file

@ -0,0 +1,85 @@
############################################################################
# configs/stm3220g-eval/nsh/appconfig
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH application library
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib
# Networking libraries.
# Uncomment netutils/ftpc to include an FTP client library
# Uncomment netutils/ftpd to include an FTP server library
ifeq ($(CONFIG_NET),y)
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/resolv
CONFIGURED_APPS += netutils/webclient
CONFIGURED_APPS += netutils/tftpc
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += netutils/ftpd
ifeq ($(CONFIG_NSH_TELNET),y)
CONFIGURED_APPS += netutils/telnetd
endif
endif
# Applications configured as an NX built-in commands
ifeq ($(CONFIG_ADC),y)
CONFIGURED_APPS += examples/adc
endif
ifeq ($(CONFIG_PWM),y)
CONFIGURED_APPS += examples/pwm
endif
ifeq ($(CONFIG_CAN),y)
CONFIGURED_APPS += examples/can
endif
ifeq ($(CONFIG_I2C),y)
CONFIGURED_APPS += system/i2c
endif
# Uncomment examples/ftpc to include the FTP client example
# Uncomment examples/ftpd to include the FTP daemon example
ifeq ($(CONFIG_NET),y)
#CONFIGURED_APPS += examples/ftpc
#CONFIGURED_APPS += examples/ftpd
endif

1421
configs/stm3220g-eval/nsh/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1424
configs/stm3220g-eval/nsh/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/nsh/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/nsh/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/nsh/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3210e-eval/nsh2/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

170
configs/stm3220g-eval/nsh2/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/nsh2/Make.defs
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh2/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

85
configs/stm3220g-eval/nsh2/appconfig Normal file
View file

@ -0,0 +1,85 @@
############################################################################
# configs/stm3220g-eval/nsh2/appconfig
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH application library
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib
# Networking libraries.
# Uncomment netutils/ftpc to include an FTP client library
# Uncomment netutils/ftpd to include an FTP server library
ifeq ($(CONFIG_NET),y)
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/resolv
CONFIGURED_APPS += netutils/webclient
CONFIGURED_APPS += netutils/tftpc
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += netutils/ftpd
ifeq ($(CONFIG_NSH_TELNET),y)
CONFIGURED_APPS += netutils/telnetd
endif
endif
# Applications configured as an NX built-in commands
ifeq ($(CONFIG_ADC),y)
CONFIGURED_APPS += examples/adc
endif
ifeq ($(CONFIG_PWM),y)
CONFIGURED_APPS += examples/pwm
endif
ifeq ($(CONFIG_CAN),y)
CONFIGURED_APPS += examples/can
endif
ifeq ($(CONFIG_I2C),y)
CONFIGURED_APPS += system/i2c
endif
# Uncomment examples/ftpc to include the FTP client example
# Uncomment examples/ftpd to include the FTP daemon example
ifeq ($(CONFIG_NET),y)
#CONFIGURED_APPS += examples/ftpc
#CONFIGURED_APPS += examples/ftpd
endif

1422
configs/stm3220g-eval/nsh2/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1424
configs/stm3220g-eval/nsh2/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

1424
configs/stm3220g-eval/nsh2/defconfig~.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/nsh2/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/nsh2/ld.script
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/nsh2/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3210e-eval/nsh2/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

170
configs/stm3220g-eval/ostest/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/ostest/Make.defs
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

39
configs/stm3220g-eval/ostest/appconfig Normal file
View file

@ -0,0 +1,39 @@
############################################################################
# configs/stm3220g-eval/ostest/appconfig
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/ostest

1500
configs/stm3220g-eval/ostest/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1503
configs/stm3220g-eval/ostest/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/ostest/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/ostest/ld.script
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/ostest/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3220g-eval/ostest/setenv.sh
#
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

111
configs/stm3220g-eval/src/Makefile Normal file
View file

@ -0,0 +1,111 @@
############################################################################
# configs/stm3220g-eval/src/Makefile
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_spi.c
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += up_autoleds.c
else
CSRCS += up_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
endif
ifeq ($(CONFIG_ADC),y)
CSRCS += up_adc.c
endif
ifeq ($(CONFIG_PWM),y)
CSRCS += up_pwm.c
endif
ifeq ($(CONFIG_CAN),y)
CSRCS += up_can.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
@( for obj in $(OBJS) ; do \
$(call ARCHIVE, $@, $${obj}); \
done ; )
.depend: Makefile $(SRCS)
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
@touch $@
depend: .depend
clean:
@rm -f libboard$(LIBEXT) *~ .*.swp
$(call CLEAN)
distclean: clean
@rm -f Make.dep .depend
-include Make.dep

171
configs/stm3220g-eval/src/stm3220g-internal.h Normal file
View file

@ -0,0 +1,171 @@
/****************************************************************************************************
* configs/stm3220g_eval/src/stm3220g_internal.h
* arch/arm/src/board/stm3220g_internal.n
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __CONFIGS_STM3220G_EVAL_SRC_STM3220G_INTERNAL_H
#define __CONFIGS_STM3220G_EVAL_SRC_STM3220G_INTERNAL_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Configuration ************************************************************************************/
/* How many SPI modules does this chip support? */
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
# undef CONFIG_STM32_SPI3
#elif STM32_NSPI < 3
# undef CONFIG_STM32_SPI3
#endif
/* You can use either CAN1 or CAN2, but you can't use both because they share the same transceiver */
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "The STM3250G-EVAL will only support one of CAN1 and CAN2"
#endif
/* You can't use CAN1 with FSMC:
*
* PD0 = FSMC_D2 & CAN1_RX
* PD1 = FSMC_D3 & CAN1_TX
*/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_FSMC)
# warning "The STM3250G-EVAL will only support one of CAN1 and FSMC"
#endif
/* The USB OTG HS ULPI bus is shared with CAN2 bus:
*
* PB13 = ULPI_D6 & CAN2_TX
* PB5 = ULPI_D7 & CAN2_RX
*/
#if defined(CONFIG_STM32_CAN2) && defined(CONFIG_STM32_OTGHS)
# warning "The STM3250G-EVAL will only support one of CAN2 and USB OTG HS"
#endif
/* STM3220G-EVAL GPIOs ******************************************************************************/
/* LEDs */
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN6)
#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
#define GPIO_LED3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN9)
#define GPIO_LED4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)
/* BUTTONS -- NOTE that all have EXTI interrupts configured */
#define MIN_IRQBUTTON BUTTON_WAKEUP
#define MAX_IRQBUTTON BUTTON_USER
#define NUM_IRQBUTTONS (BUTTON_USER - BUTTON_WAKEUP + 1)
#define GPIO_BTN_WAKEUP (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
#define GPIO_BTN_TAMPER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN13)
#define GPIO_BTN_USER (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN15)
/* PWM
*
* The STM3220G-Eval has no real on-board PWM devices, but the board can be
* configured to output a pulse train using TIM4, TIM1, or TIM8 (see board.h).
* Let's figure out which the user has configured.
*/
#ifdef CONFIG_PWM
# if defined(CONFIG_STM32_TIM1_PWM)
# define STM3220G_EVAL_PWMTIMER 1
# elif defined(CONFIG_STM32_TIM4_PWM)
# define STM3220G_EVAL_PWMTIMER 4
# elif defined(CONFIG_STM32_TIM8_PWM)
# define STM3220G_EVAL_PWMTIMER 8
# endif
#endif
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/* GPIO settings that will be altered when external memory is selected:
*
* ----- ------- -------- ------------ ------- ------------ -------- ----------- -------- -------------
* PB7: FSMC NL PD0-1: FSMC D2-D3 PE0: FSMC NBL0 PF0-5: FSMC A0-A5 PG0-5: FSMC A10-A15
* PD3: FSMC CLK PE1: FSMC BLN1 PF6: FSMC NIORD PG6-7: FSMC INT2-3
* PD4: FSMC NOE PE2: FSMC A23 PF7: FSMC NREG PG9: FSMC NCE3
* PD5: FSMC NWE PE3-6: FSMC A19-A22 PF8: FSMC NIOWR PG9-10: FSMC NE2-3
* PD6: FSMC NWAIT PE7-15: FSMC D4-D12 PF9: FSMC CD PG10: FSMC NCE4 (1)
* PD7: FSMC NE1 PF10: FSMC INTR PG11: FSMC NCE4 (2)
* PD7: FSMC NCE2 PF12-15: FSMC A6-A9 PG12: FSMC NE4
* PD8-10: FSMC D13-D15 PG13-14: FSMC A24-A25
* PD11-13: FSMC_A16-A18
* PD14-15: FSMC D0-D1
*/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3220G-EVAL board.
*
****************************************************************************************************/
extern void weak_function stm32_spiinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_STM3220G_EVAL_SRC_STM3220G_INTERNAL_H */

168
configs/stm3220g-eval/src/up_adc.c Normal file
View file

@ -0,0 +1,168 @@
/************************************************************************************
* configs/stm3220g-eval/src/up_adc.c
* arch/arm/src/board/up_adc.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/analog/adc.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "stm32_pwm.h"
#include "stm3220g-internal.h"
#ifdef CONFIG_ADC
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration ************************************************************/
/* Up to 3 ADC interfaces are supported */
#if STM32_NADC < 3
# undef CONFIG_STM32_ADC3
#endif
#if STM32_NADC < 2
# undef CONFIG_STM32_ADC2
#endif
#if STM32_NADC < 1
# undef CONFIG_STM32_ADC1
#endif
#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
#ifndef CONFIG_STM32_ADC3
# warning "Channel information only available for ADC3"
#endif
/* The number of ADC channels in the conversion list */
#define ADC3_NCHANNELS 1
/************************************************************************************
* Private Data
************************************************************************************/
/* The STM3220G-EVAL has a 10 Kohm potentiometer RV1 connected to PF9 of
* STM32F207IGH6 on the board: TIM14_CH1/FSMC_CD/ADC3_IN7
*/
/* Identifying number of each ADC channel: Variable Resistor. */
#ifdef CONFIG_STM32_ADC3
static const uint8_t g_chanlist[ADC3_NCHANNELS] = {7};
/* Configurations of pins used byte each ADC channels */
static const uint32_t g_pinlist[ADC3_NCHANNELS] = {GPIO_ADC3_IN7};
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: adc_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/adc.
*
************************************************************************************/
int adc_devinit(void)
{
#ifdef CONFIG_STM32_ADC3
static bool initialized = false;
struct adc_dev_s *adc;
int ret;
int i;
/* Check if we have already initialized */
if (!initialized)
{
/* Configure the pins as analog inputs for the selected channels */
for (i = 0; i < ADC3_NCHANNELS; i++)
{
stm32_configgpio(g_pinlist[i]);
}
/* Call stm32_adcinitialize() to get an instance of the ADC interface */
adc = stm32_adcinitialize(3, g_chanlist, ADC3_NCHANNELS);
if (adc == NULL)
{
adbg("ERROR: Failed to get ADC interface\n");
return -ENODEV;
}
/* Register the ADC driver at "/dev/adc0" */
ret = adc_register("/dev/adc0", adc);
if (ret < 0)
{
adbg("adc_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
#else
return -ENOSYS;
#endif
}
#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
#endif /* CONFIG_ADC */

260
configs/stm3220g-eval/src/up_autoleds.c Normal file
View file

@ -0,0 +1,260 @@
/****************************************************************************
* configs/stm3220g_eval/src/up_autoleds.c
* arch/arm/src/board/up_autoleds.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32_internal.h"
#include "stm3220g-internal.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* The following definitions map the encoded LED setting to GPIO settings */
#define STM3210E_LED1 (1 << 0)
#define STM3210E_LED2 (1 << 1)
#define STM3210E_LED3 (1 << 2)
#define STM3210E_LED4 (1 << 3)
#define ON_SETBITS_SHIFT (0)
#define ON_CLRBITS_SHIFT (4)
#define OFF_SETBITS_SHIFT (8)
#define OFF_CLRBITS_SHIFT (12)
#define ON_BITS(v) ((v) & 0xff)
#define OFF_BITS(v) (((v) >> 8) & 0x0ff)
#define SETBITS(b) ((b) & 0x0f)
#define CLRBITS(b) (((b) >> 4) & 0x0f)
#define ON_SETBITS(v) (SETBITS(ON_BITS(v))
#define ON_CLRBITS(v) (CLRBITS(ON_BITS(v))
#define OFF_SETBITS(v) (SETBITS(OFF_BITS(v))
#define OFF_CLRBITS(v) (CLRBITS(OFF_BITS(v))
#define LED_STARTED_ON_SETBITS ((STM3210E_LED1) << ON_SETBITS_SHIFT)
#define LED_STARTED_ON_CLRBITS ((STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT)
#define LED_STARTED_OFF_SETBITS (0 << OFF_SETBITS_SHIFT)
#define LED_STARTED_OFF_CLRBITS ((STM3210E_LED1|STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT)
#define LED_HEAPALLOCATE_ON_SETBITS ((STM3210E_LED2) << ON_SETBITS_SHIFT)
#define LED_HEAPALLOCATE_ON_CLRBITS ((STM3210E_LED1|STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT)
#define LED_HEAPALLOCATE_OFF_SETBITS ((STM3210E_LED1) << OFF_SETBITS_SHIFT)
#define LED_HEAPALLOCATE_OFF_CLRBITS ((STM3210E_LED2|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT)
#define LED_IRQSENABLED_ON_SETBITS ((STM3210E_LED1|STM3210E_LED2) << ON_SETBITS_SHIFT)
#define LED_IRQSENABLED_ON_CLRBITS ((STM3210E_LED3|STM3210E_LED4) << ON_CLRBITS_SHIFT)
#define LED_IRQSENABLED_OFF_SETBITS ((STM3210E_LED2) << OFF_SETBITS_SHIFT)
#define LED_IRQSENABLED_OFF_CLRBITS ((STM3210E_LED1|STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT)
#define LED_STACKCREATED_ON_SETBITS ((STM3210E_LED3) << ON_SETBITS_SHIFT)
#define LED_STACKCREATED_ON_CLRBITS ((STM3210E_LED1|STM3210E_LED2|STM3210E_LED4) << ON_CLRBITS_SHIFT)
#define LED_STACKCREATED_OFF_SETBITS ((STM3210E_LED1|STM3210E_LED2) << OFF_SETBITS_SHIFT)
#define LED_STACKCREATED_OFF_CLRBITS ((STM3210E_LED3|STM3210E_LED4) << OFF_CLRBITS_SHIFT)
#define LED_INIRQ_ON_SETBITS ((STM3210E_LED1) << ON_SETBITS_SHIFT)
#define LED_INIRQ_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_INIRQ_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_INIRQ_OFF_CLRBITS ((STM3210E_LED1) << OFF_CLRBITS_SHIFT)
#define LED_SIGNAL_ON_SETBITS ((STM3210E_LED2) << ON_SETBITS_SHIFT)
#define LED_SIGNAL_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_SIGNAL_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_SIGNAL_OFF_CLRBITS ((STM3210E_LED2) << OFF_CLRBITS_SHIFT)
#define LED_ASSERTION_ON_SETBITS ((STM3210E_LED4) << ON_SETBITS_SHIFT)
#define LED_ASSERTION_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_ASSERTION_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_ASSERTION_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT)
#define LED_PANIC_ON_SETBITS ((STM3210E_LED4) << ON_SETBITS_SHIFT)
#define LED_PANIC_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT)
#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT)
#define LED_PANIC_OFF_CLRBITS ((STM3210E_LED4) << OFF_CLRBITS_SHIFT)
/****************************************************************************
* Private Data
****************************************************************************/
static const uint16_t g_ledbits[8] =
{
(LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS |
LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS),
(LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS |
LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS),
(LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS |
LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS),
(LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS |
LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS),
(LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS |
LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS),
(LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS |
LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS),
(LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS |
LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS),
(LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS |
LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS)
};
/****************************************************************************
* Private Functions
****************************************************************************/
static inline void led_clrbits(unsigned int clrbits)
{
if ((clrbits & STM3210E_LED1) != 0)
{
stm32_gpiowrite(GPIO_LED1, false);
}
if ((clrbits & STM3210E_LED2) != 0)
{
stm32_gpiowrite(GPIO_LED2, false);
}
if ((clrbits & STM3210E_LED3) != 0)
{
stm32_gpiowrite(GPIO_LED3, false);
}
if ((clrbits & STM3210E_LED4) != 0)
{
stm32_gpiowrite(GPIO_LED4, false);
}
}
static inline void led_setbits(unsigned int setbits)
{
if ((setbits & STM3210E_LED1) != 0)
{
stm32_gpiowrite(GPIO_LED1, true);
}
if ((setbits & STM3210E_LED2) != 0)
{
stm32_gpiowrite(GPIO_LED2, true);
}
if ((setbits & STM3210E_LED3) != 0)
{
stm32_gpiowrite(GPIO_LED3, true);
}
if ((setbits & STM3210E_LED4) != 0)
{
stm32_gpiowrite(GPIO_LED4, true);
}
}
static void led_setonoff(unsigned int bits)
{
led_clrbits(CLRBITS(bits));
led_setbits(SETBITS(bits));
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
void up_ledinit(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2);
stm32_configgpio(GPIO_LED3);
stm32_configgpio(GPIO_LED4);
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
led_setonoff(ON_BITS(g_ledbits[led]));
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
led_setonoff(OFF_BITS(g_ledbits[led]));
}
#endif /* CONFIG_ARCH_LEDS */

90
configs/stm3220g-eval/src/up_boot.c Normal file
View file

@ -0,0 +1,90 @@
/************************************************************************************
* configs/stm3220g-eval/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "stm3220g-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void)
{
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
if (stm32_spiinitialize)
{
stm32_spiinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
}

170
configs/stm3220g-eval/src/up_buttons.c Normal file
View file

@ -0,0 +1,170 @@
/****************************************************************************
* configs/stm3220g-eval/src/up_buttons.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <arch/board/board.h>
#include "stm3220g-internal.h"
#ifdef CONFIG_ARCH_BUTTONS
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/* Pin configuration for each STM3210E-EVAL button. This array is indexed by
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const uint16_t g_buttons[NUM_BUTTONS] =
{
GPIO_BTN_WAKEUP, GPIO_BTN_TAMPER, GPIO_BTN_USER
};
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_buttoninit
*
* Description:
* up_buttoninit() must be called to initialize button resources. After
* that, up_buttons() may be called to collect the current state of all
* buttons or up_irqbutton() may be called to register button interrupt
* handlers.
*
****************************************************************************/
void up_buttoninit(void)
{
int i;
/* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are
* configured for all pins.
*/
for (i = 0; i < NUM_BUTTONS; i++)
{
stm32_configgpio(g_buttons[i]);
}
}
/****************************************************************************
* Name: up_buttons
****************************************************************************/
uint8_t up_buttons(void)
{
uint8_t ret = 0;
int i;
/* Check that state of each key */
for (i = 0; i < NUM_BUTTONS; i++)
{
/* A LOW value means that the key is pressed for most keys. The exception
* is the WAKEUP button.
*/
bool released = stm32_gpioread(g_buttons[i]);
if (i == BUTTON_WAKEUP)
{
released = !released;
}
/* Accumulate the set of depressed (not released) keys */
if (!released)
{
ret |= (1 << i);
}
}
return ret;
}
/************************************************************************************
* Button support.
*
* Description:
* up_buttoninit() must be called to initialize button resources. After
* that, up_buttons() may be called to collect the current state of all
* buttons or up_irqbutton() may be called to register button interrupt
* handlers.
*
* After up_buttoninit() has been called, up_buttons() may be called to
* collect the state of all buttons. up_buttons() returns an 8-bit bit set
* with each bit associated with a button. See the BUTTON_*_BIT
* definitions in board.h for the meaning of each bit.
*
* up_irqbutton() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BUTTON_* definitions in board.h for the meaning of enumeration
* value. The previous interrupt handler address is returned (so that it may
* restored, if so desired).
*
************************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
xcpt_t up_irqbutton(int id, xcpt_t irqhandler)
{
xcpt_t oldhandler = NULL;
/* The following should be atomic */
if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON)
{
oldhandler = stm32_gpiosetevent(g_buttons[id], true, true, true, irqhandler);
}
return oldhandler;
}
#endif
#endif /* CONFIG_ARCH_BUTTONS */

142
configs/stm3220g-eval/src/up_can.c Normal file
View file

@ -0,0 +1,142 @@
/************************************************************************************
* configs/stm3220g-eval/src/up_can.c
* arch/arm/src/board/up_can.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/can.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "stm32.h"
#include "stm32_can.h"
#include "stm3220g-internal.h"
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
# undef CONFIG_STM32_CAN2
#endif
#ifdef CONFIG_STM32_CAN1
# define CAN_PORT 1
#else
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define candbg dbg
# define canvdbg vdbg
# define canlldbg lldbg
# define canllvdbg llvdbg
#else
# define candbg(x...)
# define canvdbg(x...)
# define canlldbg(x...)
# define canllvdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: can_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/can.
*
************************************************************************************/
int can_devinit(void)
{
static bool initialized = false;
struct can_dev_s *can;
int ret;
/* Check if we have already initialized */
if (!initialized)
{
/* Call stm32_caninitialize() to get an instance of the CAN interface */
can = stm32_caninitialize(CAN_PORT);
if (can == NULL)
{
candbg("ERROR: Failed to get CAN interface\n");
return -ENODEV;
}
/* Register the CAN driver at "/dev/can0" */
ret = can_register("/dev/can0", can);
if (ret < 0)
{
candbg("ERROR: can_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif /* CONFIG_CAN && (CONFIG_STM32_CAN2 || CONFIG_STM32_CAN3) */

208
configs/stm3220g-eval/src/up_nsh.c Normal file
View file

@ -0,0 +1,208 @@
/****************************************************************************
* config/stm3220g_eval/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#ifdef CONFIG_STM32_SPI1
# include <nuttx/spi.h>
# include <nuttx/mtd.h>
#endif
#ifdef CONFIG_STM32_SDIO
# include <nuttx/sdio.h>
# include <nuttx/mmcsd.h>
#endif
#include "stm32_internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* For now, don't build in any SPI1 support -- NSH is not using it */
#undef CONFIG_STM32_SPI1
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_STM3220G_EVAL
# define CONFIG_NSH_HAVEUSBDEV 1
# define CONFIG_NSH_HAVEMMCSD 1
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_NSH_MMCSDSLOTNO
# define CONFIG_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new STM32 boards here */
# error "Unrecognized STM32 board"
# undef CONFIG_NSH_HAVEUSBDEV
# undef CONFIG_NSH_HAVEMMCSD
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_NSH_HAVEUSBDEV
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
# undef CONFIG_NSH_HAVEMMCSD
#endif
#ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lib_lowprintf(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lib_lowprintf
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#ifdef CONFIG_STM32_SPI1
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
#ifdef CONFIG_NSH_HAVEMMCSD
FAR struct sdio_dev_s *sdio;
int ret;
#endif
/* Configure SPI-based devices */
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 1\n");
spi = up_spiinitialize(1);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 0\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 0\n");
/* Now bind the SPI interface to the M25P64/128 SPI FLASH driver */
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = m25p_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully bound SPI port 0 to the SPI FLASH driver\n");
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Mount the SDIO-based MMC/SD block driver */
#ifdef CONFIG_NSH_HAVEMMCSD
/* First, get an instance of the SDIO interface */
message("nsh_archinitialize: Initializing SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio)
{
message("nsh_archinitialize: Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the STM3220G-EVAL board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
return OK;
}

120
configs/stm3220g-eval/src/up_pwm.c Normal file
View file

@ -0,0 +1,120 @@
/************************************************************************************
* configs/stm3220g-eval/src/up_pwm.c
* arch/arm/src/board/up_pwm.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/pwm.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "stm32_pwm.h"
#include "stm3220g-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration *******************************************************************/
/* PWM
*
* The STM3220G-Eval has no real on-board PWM devices, but the board can be
* configured to output a pulse train using variously unused pins on the board for
* PWM output (see board.h for details of pins).
*/
#ifdef CONFIG_PWM
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: pwm_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/pwm.
*
************************************************************************************/
int pwm_devinit(void)
{
static bool initialized = false;
struct pwm_lowerhalf_s *pwm;
int ret;
/* Have we already initialized? */
if (!initialized)
{
/* Call stm32_pwminitialize() to get an instance of the PWM interface */
pwm = stm32_pwminitialize(STM3220G_EVAL_PWMTIMER);
if (!pwm)
{
dbg("Failed to get the STM32 PWM lower half\n");
return -ENODEV;
}
/* Register the PWM driver at "/dev/pwm0" */
ret = pwm_register("/dev/pwm0", pwm);
if (ret < 0)
{
adbg("pwm_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif /* CONFIG_PWM */

161
configs/stm3220g-eval/src/up_spi.c Normal file
View file

@ -0,0 +1,161 @@
/************************************************************************************
* configs/stm3220g_eval/src/up_spi.c
* arch/arm/src/board/up_spi.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32_internal.h"
#include "stm3220g-internal.h"
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
/************************************************************************************
* Definitions
************************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
#undef SPI_DEBUG /* Define to enable debug */
#undef SPI_VERBOSE /* Define to enable verbose debug */
#ifdef SPI_DEBUG
# define spidbg lldbg
# ifdef SPI_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# undef SPI_VERBOSE
# define spidbg(x...)
# define spivdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the STM3220G-EVAL board.
*
************************************************************************************/
void weak_function stm32_spiinitialize(void)
{
#warning "Missing logic"
}
/****************************************************************************
* Name: stm32_spi1/2/3select and stm32_spi1/2/3status
*
* Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
#ifdef CONFIG_STM32_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return SPI_STATUS_PRESENT;
}
#endif
#ifdef CONFIG_STM32_SPI2
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return SPI_STATUS_PRESENT;
}
#endif
#ifdef CONFIG_STM32_SPI3
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
}
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return SPI_STATUS_PRESENT;
}
#endif
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */

131
configs/stm3220g-eval/src/up_userleds.c Normal file
View file

@ -0,0 +1,131 @@
/****************************************************************************
* configs/stm3220g_eval/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32_internal.h"
#include "stm3220g-internal.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* This array maps an LED number to GPIO pin configuration */
static uint32_t g_ledcfg[BOARD_NLEDS] =
{
GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: stm32_ledinit
****************************************************************************/
void stm32_ledinit(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED1);
stm32_configgpio(GPIO_LED2);
stm32_configgpio(GPIO_LED3);
stm32_configgpio(GPIO_LED4);
}
/****************************************************************************
* Name: stm32_setled
****************************************************************************/
void stm32_setled(int led, bool ledon)
{
if ((unsigned)led < BOARD_NLEDS)
{
stm32_gpiowrite(g_ledcfg[led], ledon);
}
}
/****************************************************************************
* Name: stm32_setleds
****************************************************************************/
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

170
configs/stm3220g-eval/telnetd/Make.defs Normal file
View file

@ -0,0 +1,170 @@
############################################################################
# configs/stm3220g-eval/telnetd/Make.defs
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_STM32_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_STM32_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/telnetd/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

44
configs/stm3220g-eval/telnetd/appconfig Normal file
View file

@ -0,0 +1,44 @@
############################################################################
# configs/stm3220g-eval/telnetd/appconfig
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/telnetd
# Networking support
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/telnetd

1278
configs/stm3220g-eval/telnetd/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

1281
configs/stm3220g-eval/telnetd/defconfig.bak Normal file
View file

File diff suppressed because it is too large Load diff

116
configs/stm3220g-eval/telnetd/ld.script Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/stm3220g-eval/telnetd/ld.script
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
* 3) 64Kb of TCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
configs/stm3220g-eval/telnetd/setenv.sh Executable file
View file

@ -0,0 +1,67 @@
#!/bin/bash
# configs/stm3220g-eval/telnetd/setenv.sh
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

13
configs/stm3220g-eval/tools/olimex-arm-usb-ocd.cfg Normal file
View file

@ -0,0 +1,13 @@
#
# Olimex ARM-USB-OCD
#
# http://www.olimex.com/dev/arm-usb-ocd.html
#
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_layout olimex-jtag
ft2232_vid_pid 0x15ba 0x0003
#jtag_khz 600

90
configs/stm3220g-eval/tools/oocd.sh Normal file
View file

@ -0,0 +1,90 @@
#!/bin/sh
# Get command line parameters
USAGE="USAGE: $0 [-dh] <TOPDIR>"
ADVICE="Try '$0 -h' for more information"
while [ ! -z "$1" ]; do
case $1 in
-d )
set -x
;;
-h )
echo "$0 is a tool for generation of proper version files for the NuttX build"
echo ""
echo $USAGE
echo ""
echo "Where:"
echo " -d"
echo " Enable script debug"
echo " -h"
echo " show this help message and exit"
echo " Use the OpenOCD 0.4.0"
echo " <TOPDIR>"
echo " The full path to the top-level NuttX directory"
exit 0
;;
* )
break;
;;
esac
shift
done
TOPDIR=$1
if [ -z "${TOPDIR}" ]; then
echo "Missing argument"
echo $USAGE
echo $ADVICE
exit 1
fi
# This script *probably* only works with the following versions of OpenOCD:
# Local search directory and configurations
OPENOCD_SEARCHDIR="${TOPDIR}/configs/stm3210e-eval/tools"
OPENOCD_WSEARCHDIR="`cygpath -w ${OPENOCD_SEARCHDIR}`"
OPENOCD_PATH="/cygdrive/c/Program Files (x86)/OpenOCD/0.4.0/bin"
OPENOCD_EXE=openocd.exe
OPENOCD_INTERFACE="olimex-arm-usb-ocd.cfg"
OPENOCD_TARGET="stm32.cfg"
OPENOCD_ARGS="-s ${OPENOCD_WSEARCHDIR} -f ${OPENOCD_INTERFACE} -f ${OPENOCD_TARGET}"
echo "Trying OpenOCD 0.4.0 path: ${OPENOCD_PATH}/${OPENOCD_EXE}"
# Verify that everything is what it claims it is and is located where it claims it is.
if [ ! -x "${OPENOCD_PATH}/${OPENOCD_EXE}" ]; then
echo "OpenOCD executable does not exist: ${OPENOCD_PATH}/${OPENOCD_EXE}"
exit 1
fi
if [ ! -f "${OPENOCD_SEARCHDIR}/${OPENOCD_TARGET}" ]; then
echo "OpenOCD target config file does not exist: ${OPENOCD_SEARCHDIR}/${OPENOCD_TARGET}"
exit 1
fi
if [ ! -f "${OPENOCD_SEARCHDIR}/${OPENOCD_INTERFACE}" ]; then
echo "OpenOCD interface config file does not exist: ${OPENOCD_SEARCHDIR}/${OPENOCD_INTERFACE}"
exit 1
fi
# Enable debug if so requested
if [ "X$2" = "X-d" ]; then
OPENOCD_ARGS=$OPENOCD_ARGS" -d3"
set -x
fi
# Okay... do it!
echo "Starting OpenOCD"
"${OPENOCD_PATH}/${OPENOCD_EXE}" ${OPENOCD_ARGS} &
echo "OpenOCD daemon started"
ps -ef | grep openocd
echo "In GDB: target remote localhost:3333"

69
configs/stm3220g-eval/tools/stm32.cfg Normal file
View file

@ -0,0 +1,69 @@
# script for stm32
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x4000
}
# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
jtag_khz 1000
jtag_nsrst_delay 100
jtag_ntrst_delay 100
#jtag scan chain
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# See STM Document RM0008
# Section 26.6.3
set _CPUTAPID 0x3ba00477
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
if { [info exists BSTAPID ] } {
# FIXME this never gets used to override defaults...
set _BSTAPID $BSTAPID
} else {
# See STM Document RM0008
# Section 29.6.2
# Low density devices, Rev A
set _BSTAPID1 0x06412041
# Medium density devices, Rev A
set _BSTAPID2 0x06410041
# Medium density devices, Rev B and Rev Z
set _BSTAPID3 0x16410041
# High density devices, Rev A
set _BSTAPID4 0x06414041
# Connectivity line devices, Rev A and Rev Z
set _BSTAPID5 0x06418041
}
jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \
-expected-id $_BSTAPID2 -expected-id $_BSTAPID3 \
-expected-id $_BSTAPID4 -expected-id $_BSTAPID5
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stm32x 0 0 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:
# openocd.texi