diff --git a/drivers/sensors/sensor.c b/drivers/sensors/sensor.c
index f8861214f64..87f48245835 100644
--- a/drivers/sensors/sensor.c
+++ b/drivers/sensors/sensor.c
@@ -227,6 +227,10 @@ static const struct sensor_meta_s g_sensor_meta[] =
   {sizeof(struct sensor_voltage),             "voltage"},
   {sizeof(struct sensor_current),             "current"},
   {sizeof(struct sensor_power),               "power"},
+  {sizeof(struct sensor_resistance),          "resistance"},
+  {sizeof(struct sensor_conductivity),        "conductivity"},
+  {sizeof(struct sensor_energy),              "energy"},
+  {sizeof(struct sensor_charge),              "charge"},
 };
 
 static const struct file_operations g_sensor_fops =
diff --git a/include/nuttx/uorb.h b/include/nuttx/uorb.h
index 72e2e1ab636..fc102fb782e 100644
--- a/include/nuttx/uorb.h
+++ b/include/nuttx/uorb.h
@@ -607,18 +607,52 @@
 
 /* Power
  * A sensor of this type returns the measured instantaneous active power.
- * The value is in SI units watt(W). The accumulated energy and the AC
- * power components (reactive, apparent and power factor) are not covered
- * by this type.
+ * The value is in SI units watt(W). The accumulated energy is reported by
+ * SENSOR_TYPE_ENERGY. The AC power components (reactive, apparent and
+ * power factor) are not covered by this type.
  */
 
 #define SENSOR_TYPE_POWER                           61
 
+/* Resistance
+ * A sensor of this type returns the measured DC resistance. The value is
+ * in SI units Ohm(Ω). Use SENSOR_TYPE_IMPEDANCE instead when the reactance
+ * is also needed.
+ */
+
+#define SENSOR_TYPE_RESISTANCE                      62
+
+/* Electrical conductivity
+ * A sensor of this type returns the measured electrical conductivity of a
+ * medium. The value is in SI units siemens per metre(S/m), where 1 S/m
+ * equals 1e4 uS/cm.
+ */
+
+#define SENSOR_TYPE_CONDUCTIVITY                    63
+
+/* Energy
+ * A sensor of this type returns the electrical energy accumulated since
+ * the accumulator was last reset. The value is in uJ, where 1 Wh equals
+ * 3.6e9 uJ. The value is signed: a negative value indicates that the
+ * energy flows in the direction opposite to the reference direction.
+ */
+
+#define SENSOR_TYPE_ENERGY                          64
+
+/* Charge
+ * A sensor of this type returns the electrical charge accumulated since
+ * the accumulator was last reset, that is the time integral of the
+ * current. The value is in uC, where 1 Ah equals 3.6e9 uC. The value is
+ * signed and uses the same direction convention as SENSOR_TYPE_CURRENT.
+ */
+
+#define SENSOR_TYPE_CHARGE                          65
+
 /* The total number of sensor
  * please increase it if you added a new sensor type!
  */
 
-#define SENSOR_TYPE_COUNT                           62
+#define SENSOR_TYPE_COUNT                           66
 
 /* The additional sensor open flags */
 
@@ -1075,6 +1109,30 @@ struct sensor_power         /* Type: Power */
   float power;              /* Instantaneous active power in SI units W */
 };
 
+struct sensor_resistance    /* Type: Resistance */
+{
+  uint64_t timestamp;       /* Unit is microseconds */
+  float resistance;         /* in SI units Ohm(Ω) */
+};
+
+struct sensor_conductivity  /* Type: Electrical conductivity */
+{
+  uint64_t timestamp;       /* Unit is microseconds */
+  float conductivity;       /* in SI units S/m, 1 S/m = 1e4 uS/cm */
+};
+
+struct sensor_energy        /* Type: Energy */
+{
+  uint64_t timestamp;       /* Unit is microseconds */
+  int64_t energy;           /* Accumulated energy. Unit is uJ. */
+};
+
+struct sensor_charge        /* Type: Charge */
+{
+  uint64_t timestamp;       /* Unit is microseconds */
+  int64_t charge;           /* Accumulated charge. Unit is uC. */
+};
+
 struct sensor_gnss          /* Type: GNSS */
 {
   uint64_t timestamp;       /* Time since system start, Units is microseconds */