Aksal/nuttx-apps
1
0
Fork 1
mirror of https://github.com/apache/nuttx-apps.git synced 2026-08-01 20:29:00 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
nuttx-apps/system/readline/readline_common.c
Alan Carvalho de Assis 8d5e9f3754 system/readline: Fix small issues 
This PR fixes some small issues raised by Xiang Xiao.

Signed-off-by: Alan C. Assis <acassis@gmail.com>
2026-07-26 18:46:45 -03:00

1638 lines
48 KiB
C
Raw Permalink Blame History

/****************************************************************************
* apps/system/readline/readline_common.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <string.h>
#include <ctype.h>
#include <errno.h>
#include <assert.h>
#include <nuttx/debug.h>
#include <nuttx/ascii.h>
#include <nuttx/vt100.h>
#include <nuttx/lib/builtin.h>
#include "system/readline.h"
#include "readline.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifdef CONFIG_READLINE_CMD_HISTORY
# define RL_CMDHIST_LEN CONFIG_READLINE_CMD_HISTORY_LEN
# define RL_CMDHIST_LINELEN CONFIG_READLINE_CMD_HISTORY_LINELEN
#endif
#ifdef CONFIG_READLINE_EDIT_EMACS
/* Emacs-style control key codes */
# define CTRL_A 1 /* ^A - Home */
# define CTRL_B 2 /* ^B - Left */
# define CTRL_D 4 /* ^D - Delete at cursor */
# define CTRL_E 5 /* ^E - End */
# define CTRL_F 6 /* ^F - Right */
# define CTRL_K 11 /* ^K - Kill to end of line */
# define CTRL_U 21 /* ^U - Kill to beginning of line */
# define CTRL_W 23 /* ^W - Kill word backward */
# ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
# define CTRL_G 7 /* ^G - Cancel incremental search */
# define CTRL_R 18 /* ^R - Reverse incremental search */
# endif
#endif
/****************************************************************************
* Private Types
****************************************************************************/
#ifdef CONFIG_READLINE_CMD_HISTORY
struct cmdhist_s
{
char buf[RL_CMDHIST_LEN][RL_CMDHIST_LINELEN]; /* Circular buffer */
int head; /* Head of the circular buffer */
int offset; /* Offset from head */
int len; /* Size of the circular buffer */
};
#endif /* CONFIG_READLINE_CMD_HISTORY */
/****************************************************************************
* Private Data
****************************************************************************/
/* <esc>[K is the VT100 command erases to the end of the line. */
#ifdef CONFIG_READLINE_ECHO
static const char g_erasetoeol[] = VT100_CLEAREOL;
#endif
#ifdef CONFIG_READLINE_EDIT
static const char g_curleft[] =
{
ASCII_ESC, '[', 'D'
};
static const char g_curright[] =
{
ASCII_ESC, '[', 'C'
};
#endif
#if defined(CONFIG_READLINE_TABCOMPLETION) || defined(CONFIG_READLINE_EDIT)
/* Prompt string to present at the beginning of the line. Needed by tab
* completion (to reprint the prompt after listing multiple matches) and
* by line editing's full-line redraws (Home, End, history recall, ...),
* so this is available whenever either feature is enabled, not just
* when both are.
*/
static FAR const char *g_readline_prompt = NULL;
#endif
#if defined(CONFIG_READLINE_TABCOMPLETION) && defined(CONFIG_READLINE_HAVE_EXTMATCH)
static FAR const struct extmatch_vtable_s *g_extmatch_vtbl = NULL;
#endif
#ifdef CONFIG_READLINE_CMD_HISTORY
static struct cmdhist_s g_cmdhist;
#endif /* CONFIG_READLINE_CMD_HISTORY */
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: count_builtin_matches
*
* Description:
* Count the number of builtin commands
*
* Input Parameters:
* matches - Array to save builtin command index.
* len - The length of the matching name to try
*
* Returned Value:
* The number of matching names
*
****************************************************************************/
#if defined(CONFIG_READLINE_TABCOMPLETION) && defined(CONFIG_BUILTIN)
static int count_builtin_matches(FAR char *buf, FAR int *matches,
int namelen)
{
#if CONFIG_READLINE_MAX_BUILTINS > 0
FAR const char *name;
int nr_matches = 0;
int i;
for (i = 0; (name = builtin_getname(i)) != NULL; i++)
{
if (strncmp(buf, name, namelen) == 0)
{
matches[nr_matches] = i;
nr_matches++;
if (nr_matches >= CONFIG_READLINE_MAX_BUILTINS)
{
break;
}
}
}
return nr_matches;
#else
return 0;
#endif
}
#endif
#if defined(CONFIG_READLINE_TABCOMPLETION) && \
(defined(CONFIG_BUILTIN) || defined(CONFIG_READLINE_HAVE_EXTMATCH))
static void tab_print_match(FAR struct rl_common_s *vtbl,
FAR const char *name, FAR char *tmp_name,
size_t tmp_size)
{
size_t j;
if (tmp_name[0] == '\0')
{
strlcpy(tmp_name, name, tmp_size);
}
RL_PUTC(vtbl, ' ');
RL_PUTC(vtbl, ' ');
for (j = 0; j < strlen(name); j++)
{
if (j < tmp_size && name[j] != tmp_name[j])
{
tmp_name[j] = '\0';
}
RL_PUTC(vtbl, name[j]);
}
RL_PUTC(vtbl, '\n');
}
#endif
/****************************************************************************
* Name: tab_completion
*
* Description:
* Unix like tab completion, only for builtin apps
*
* Input Parameters:
* vtbl - vtbl used to access implementation specific interface
* buf - The user allocated buffer to be filled.
* buflen - the size of the buffer.
* nch - the number of characters.
*
* Returned Value:
* True if the completion changed 'buf'/'*nch' and/or echoed anything
* to the terminal (a single unambiguous match was appended, or the
* multiple-match list was printed -- which always ends with a full
* reprint of the prompt and buffer, even if the common prefix did
* not grow). False if nothing happened at all (no match, or an
* exact single match with nothing left to add), in which case the
* terminal's cursor never moved.
*
****************************************************************************/
#ifdef CONFIG_READLINE_TABCOMPLETION
static bool tab_completion(FAR struct rl_common_s *vtbl, char *buf,
int buflen, int *nch)
{
FAR const char *name = NULL;
char tmp_name[CONFIG_TASK_NAME_SIZE + 1];
#ifdef CONFIG_BUILTIN
int nr_builtin_matches = 0;
int builtin_matches[CONFIG_READLINE_MAX_BUILTINS];
#endif
#ifdef CONFIG_READLINE_HAVE_EXTMATCH
int nr_ext_matches = 0;
int ext_matches[CONFIG_READLINE_MAX_EXTCMDS];
#endif
int nr_matches;
int len = *nch;
int name_len;
int i;
int j;
if (len >= 1)
{
#ifdef CONFIG_BUILTIN
/* Count the matching builtin commands */
nr_builtin_matches = count_builtin_matches(buf, builtin_matches, len);
nr_matches = nr_builtin_matches;
#else
nr_matches = 0;
#endif
#ifdef CONFIG_READLINE_HAVE_EXTMATCH
/* Is there registered external handling logic? */
nr_ext_matches = 0;
if (g_extmatch_vtbl != NULL)
{
/* Count the number of external commands */
nr_ext_matches =
g_extmatch_vtbl->count_matches(buf, ext_matches, len);
nr_matches += nr_ext_matches;
}
#endif
/* Is there only one matching name? */
if (nr_matches == 1)
{
/* Yes... that that is the one we want. Was it a match with a
* builtin command? Or with an external command.
*/
#ifdef CONFIG_BUILTIN
#ifdef CONFIG_READLINE_HAVE_EXTMATCH
if (nr_builtin_matches == 1)
#endif
{
/* It is a match with a builtin command */
name = builtin_getname(builtin_matches[0]);
}
#endif
#ifdef CONFIG_READLINE_HAVE_EXTMATCH
#ifdef CONFIG_BUILTIN
else
#endif
{
/* It is a match with an external command */
name = g_extmatch_vtbl->getname(ext_matches[0]);
}
#endif
/* Copy the name to the command buffer and to the display. */
name_len = strlen(name);
for (j = len; j < name_len; j++)
{
buf[j] = name[j];
RL_PUTC(vtbl, name[j]);
}
/* Don't remove extra characters after the completed word,
* if any.
*/
if (len < name_len)
{
*nch = name_len;
return true;
}
return false;
}
/* Are there multiple matching names? */
else if (nr_matches > 1)
{
RL_PUTC(vtbl, '\n');
/* See how many characters we can auto complete for the user
* For example, if we have the following commands:
* - prog1
* - prog2
* - prog3
* then it should automatically complete up to prog.
* We do this in one pass using a temp.
*/
memset(tmp_name, 0, sizeof(tmp_name));
#ifdef CONFIG_READLINE_HAVE_EXTMATCH
/* Show the possible external completions */
for (i = 0; i < nr_ext_matches; i++)
{
name = g_extmatch_vtbl->getname(ext_matches[i]);
tab_print_match(vtbl, name, tmp_name, sizeof(tmp_name));
}
#endif
#ifdef CONFIG_BUILTIN
/* Show the possible builtin completions */
for (i = 0; i < nr_builtin_matches; i++)
{
name = builtin_getname(builtin_matches[i]);
tab_print_match(vtbl, name, tmp_name, sizeof(tmp_name));
}
#endif
strlcpy(buf, tmp_name, buflen);
name_len = strlen(tmp_name);
/* Output the original prompt */
if (g_readline_prompt != NULL)
{
for (i = 0; i < (int)strlen(g_readline_prompt); i++)
{
RL_PUTC(vtbl, g_readline_prompt[i]);
}
}
for (i = 0; i < name_len; i++)
{
RL_PUTC(vtbl, buf[i]);
}
/* Don't remove extra characters after the completed word,
* if any
*/
/* Don't remove extra characters after the completed word,
* if any
*/
if (len < name_len)
{
*nch = name_len;
}
/* Whether or not the common prefix grew, the prompt and
* buffer were just reprinted from scratch above, so the
* terminal's cursor is now at the end of the line either
* way.
*/
return true;
}
}
return false;
}
#endif
#ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
/****************************************************************************
* Name: isearch_find
*
* Description:
* Used by Ctrl+R (reverse incremental search). Search backward
* through the command history, starting just before 'startoffset',
* for the most recent entry containing 'search' as a substring (using
* the same head/offset addressing as the up/down arrow history
* recall code above). If a match is found, it is copied into 'buf'
* (updating '*nch'), and its offset is returned via '*foundoffset' so
* that a subsequent call can continue the search further back in
* history. If no match is found, 'buf'/'*nch' are left unmodified.
*
* Returned Value:
* True if a match was found, false otherwise.
*
****************************************************************************/
static bool isearch_find(FAR const char *search, int searchlen,
int startoffset, FAR int *foundoffset,
FAR char *buf, int buflen, FAR int *nch)
{
int minoffset;
int offset;
int idx;
int len;
int i;
int j;
bool matched;
if (searchlen == 0 || g_cmdhist.len == 0)
{
return false;
}
minoffset = -(g_cmdhist.len - 1);
for (offset = startoffset - 1; offset >= minoffset; offset--)
{
idx = g_cmdhist.head + offset;
if (idx < 0)
{
idx += RL_CMDHIST_LEN;
}
else if (idx >= RL_CMDHIST_LEN)
{
idx -= RL_CMDHIST_LEN;
}
len = strlen(g_cmdhist.buf[idx]);
/* Does this history entry contain 'search' anywhere? 'search'
* is a raw character buffer that is never null-terminated (the
* caller only tracks its length in 'searchlen'), so this cannot
* use strstr() -- do a plain bounded substring search instead.
*/
matched = false;
for (i = 0; i + searchlen <= len; i++)
{
for (j = 0; j < searchlen; j++)
{
if (g_cmdhist.buf[idx][i + j] != search[j])
{
break;
}
}
if (j == searchlen)
{
matched = true;
break;
}
}
if (!matched)
{
continue;
}
if (len > buflen - 1)
{
len = buflen - 1;
}
for (i = 0; i < len; i++)
{
buf[i] = g_cmdhist.buf[idx][i];
}
buf[len] = '\0';
*nch = len;
*foundoffset = offset;
return true;
}
return false;
}
#endif
#ifdef CONFIG_READLINE_EDIT
/****************************************************************************
* Name: word_skip
*
* Description:
* Used by Ctrl+Left/Ctrl+Right. Starting from 'cursor', skip over any
* run of spaces then the following word (or, going backward, the
* preceding word then any run of spaces before it), stopping at
* 'bound' (0 going backward, 'nch' going forward). Returns the new
* cursor position.
*
****************************************************************************/
static int word_skip(FAR const char *buf, int cursor, int bound,
bool forward)
{
if (forward)
{
while (cursor < bound && buf[cursor] != ' ')
{
cursor++;
}
while (cursor < bound && buf[cursor] == ' ')
{
cursor++;
}
}
else
{
while (cursor > bound && buf[cursor - 1] == ' ')
{
cursor--;
}
while (cursor > bound && buf[cursor - 1] != ' ')
{
cursor--;
}
}
return cursor;
}
#endif
#ifdef CONFIG_READLINE_ECHO
# ifdef CONFIG_READLINE_EDIT
/****************************************************************************
* Name: redraw_line
*
* Description:
* Redraw the prompt and the line buffer from scratch: return to the
* true start of the terminal line, erase to the end of line, reprint
* the prompt (if any), reprint the buffer, then move the cursor left
* as many times as needed to visually land on 'cursor'. This does
* not depend on where the terminal's cursor happened to be beforehand
* -- unlike a backspace-based erase, it is correct no matter where
* the cursor was left by whatever came before it.
*
* This is the common tail end of every full-line redraw in this file
* (Home, End, Ctrl+Left/Right, history recall, ...); consolidating it
* here instead of repeating the same half-dozen lines at each call
* site saves a fair amount of code space.
*
****************************************************************************/
static void redraw_line(FAR struct rl_common_s *vtbl, FAR const char *buf,
int nch, int cursor)
{
int i;
RL_PUTC(vtbl, '\r');
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
if (g_readline_prompt != NULL)
{
for (i = 0; g_readline_prompt[i] != '\0'; i++)
{
RL_PUTC(vtbl, g_readline_prompt[i]);
}
}
if (nch > 0)
{
RL_WRITE(vtbl, buf, nch);
}
for (i = nch; i > cursor; i--)
{
RL_WRITE(vtbl, g_curleft, sizeof(g_curleft));
}
}
/****************************************************************************
* Name: redraw_tail
*
* Description:
* Redraw just the tail of the line, from 'cursor' to 'nch': erase to
* the end of line, rewrite whatever remains after the cursor (if
* any), then move the cursor back left to where it started. This is
* the shared tail end of every edit that only changes content at or
* after the cursor without moving it (Delete, Backspace, Ctrl+D,
* Ctrl+W, inserting a character) -- unlike redraw_line(), it does
* not touch the prompt or anything before the cursor, since none of
* those callers need to.
*
****************************************************************************/
static void redraw_tail(FAR struct rl_common_s *vtbl, FAR const char *buf,
int nch, int cursor)
{
int j;
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
if (cursor < nch)
{
RL_WRITE(vtbl, buf + cursor, nch - cursor);
for (j = nch; j > cursor; j--)
{
RL_WRITE(vtbl, g_curleft, sizeof(g_curleft));
}
}
}
# endif /* CONFIG_READLINE_EDIT */
# ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
/****************************************************************************
* Name: isearch_redraw
*
* Description:
* Redraw the reverse-incremental-search prompt line:
* "(reverse-i-search)`<search>': <match>", or
* "(failed reverse-i-search)`<search>': <match>" if the current
* search string has no match (in which case 'buf'/'nch' still hold
* whatever the last successful match was, exactly as bash does).
*
****************************************************************************/
static void isearch_redraw(FAR struct rl_common_s *vtbl,
FAR const char *search, int searchlen,
FAR const char *buf, int nch, bool failed)
{
static const char matchlabel[] = "(reverse-i-search)`";
static const char faillabel[] = "(failed reverse-i-search)`";
RL_PUTC(vtbl, '\r');
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
if (failed)
{
RL_WRITE(vtbl, faillabel, sizeof(faillabel) - 1);
}
else
{
RL_WRITE(vtbl, matchlabel, sizeof(matchlabel) - 1);
}
if (searchlen > 0)
{
RL_WRITE(vtbl, search, searchlen);
}
RL_PUTC(vtbl, '\'');
RL_PUTC(vtbl, ':');
RL_PUTC(vtbl, ' ');
if (nch > 0)
{
RL_WRITE(vtbl, buf, nch);
}
}
# endif /* CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH */
#endif /* CONFIG_READLINE_ECHO */
/****************************************************************************
* Name: submit_line
*
* Description:
* Finish a line of input: record it in the command history (if
* enabled and it isn't a duplicate of the most recent entry),
* terminate 'buf' with '\n' and a null terminator, and return the
* number of characters in 'buf' (including the trailing '\n'). This
* is shared by the normal Enter key handling and by Ctrl+R
* (reverse-i-search), which also submits the matched line directly
* on Enter.
*
****************************************************************************/
static ssize_t submit_line(FAR char *buf, int nch)
{
#ifdef CONFIG_READLINE_CMD_HISTORY
int i;
/* Save history of command, only if there was something typed besides
* the return character.
*/
if (nch >= 1)
{
/* If this command is the one at the top of the circular buffer,
* don't save it again.
*/
if (strncmp(buf, g_cmdhist.buf[g_cmdhist.head], nch + 1) != 0)
{
g_cmdhist.head = (g_cmdhist.head + 1) % RL_CMDHIST_LEN;
for (i = 0; (i < nch) && i < (RL_CMDHIST_LINELEN - 1); i++)
{
g_cmdhist.buf[g_cmdhist.head][i] = buf[i];
}
g_cmdhist.buf[g_cmdhist.head][i] = '\0';
if (g_cmdhist.len < RL_CMDHIST_LEN)
{
g_cmdhist.len++;
}
}
g_cmdhist.offset = 1;
}
#endif /* CONFIG_READLINE_CMD_HISTORY */
/* The newline is stored in the buffer along with the null
* terminator.
*/
buf[nch++] = '\n';
buf[nch] = '\0';
return nch;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: readline_prompt
*
* If a prompt string is used by the application, then the application
* must provide the prompt string to readline() by calling this function.
* This is needed for tab completion, and for line editing's full-line
* redraws (Home, End, history recall, ...), in cases where it is
* necessary to reprint the prompt string.
*
* Input Parameters:
* prompt - The prompt string. This function may then be
* called with that value in order to restore the previous vtable.
*
* Returned values:
* Returns the previous value of the prompt string. This function may
* then be called with that value in order to restore the previous prompt.
*
* Assumptions:
* The prompt string is statically allocated a global. readline() will
* simply remember the pointer to the string. The string must stay
* allocated and available. Only one prompt string is supported. If
* there are multiple clients of readline(), they must all share the same
* prompt string (with exceptions in the case of the kernel build).
*
****************************************************************************/
#if defined(CONFIG_READLINE_TABCOMPLETION) || defined(CONFIG_READLINE_EDIT)
FAR const char *readline_prompt(FAR const char *prompt)
{
FAR const char *ret = g_readline_prompt;
g_readline_prompt = prompt;
return ret;
}
#endif
/****************************************************************************
* Name: readline_extmatch
*
* If the applications supports a command set, then it may call this
* function in order to provide support for tab complete on these
* "external" commands
*
* Input Parameters:
* vtbl - Callbacks to access the external names.
*
* Returned values:
* Returns the previous vtable pointer. This function may then be
* called with that value in order to restore the previous vtable.
*
* Assumptions:
* The vtbl string is statically allocated a global. readline() will
* simply remember the pointer to the structure. The structure must stay
* allocated and available. Only one instance of such a structure is
* supported. If there are multiple clients of readline(), they must all
* share the same tab-completion logic (with exceptions in the case of
* the kernel build).
*
****************************************************************************/
#if defined(CONFIG_READLINE_TABCOMPLETION) && defined(CONFIG_READLINE_HAVE_EXTMATCH)
FAR const struct extmatch_vtable_s *
readline_extmatch(FAR const struct extmatch_vtable_s *vtbl)
{
# if (CONFIG_READLINE_MAX_EXTCMDS > 0)
FAR const struct extmatch_vtable_s *ret = g_extmatch_vtbl;
g_extmatch_vtbl = vtbl;
return ret;
# else
return NULL;
# endif
}
#endif
/****************************************************************************
* Name: readline_common
*
* Description:
* readline() reads in at most one less than 'buflen' characters from
* 'instream' and stores them into the buffer pointed to by 'buf'.
* Characters are echoed on 'outstream'. Reading stops after an EOF or a
* newline. If a newline is read, it is stored into the buffer. A null
* terminator is stored after the last character in the buffer.
*
* This version of realine assumes that we are reading and writing to
* a VT100 console. This will not work well if 'instream' or 'outstream'
* corresponds to a raw byte steam.
*
* This function is inspired by the GNU readline but is an entirely
* different creature.
*
* Input Parameters:
* vtbl - vtbl used to access implementation specific interface
* buf - The user allocated buffer to be filled.
* buflen - the size of the buffer.
*
* Returned Value:
* On success, the (positive) number of bytes transferred is returned.
* EOF is returned to indicate either an end of file condition or a
* failure.
*
****************************************************************************/
ssize_t readline_common(FAR struct rl_common_s *vtbl, FAR char *buf,
int buflen)
{
int escape;
int nch;
#ifdef CONFIG_READLINE_CMD_HISTORY
int i;
#endif
#ifdef CONFIG_READLINE_EDIT
int cursor;
#endif
#ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
bool insearch;
char search[RL_CMDHIST_LINELEN];
int searchlen;
int searchoffset;
char savedbuf[RL_CMDHIST_LINELEN];
int savednch;
int savedcursor;
#endif
/* Sanity checks */
DEBUGASSERT(buf && buflen > 0);
if (buflen < 2)
{
*buf = '\0';
return 0;
}
/* <esc>[K is the VT100 command that erases to the end of the line. */
#ifdef CONFIG_READLINE_ECHO
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
#endif
/* Read characters until we have a full line. On each the loop we must
* be assured that there are two free bytes in the line buffer: One for
* the next character and one for the null terminator.
*/
escape = 0;
nch = 0;
#ifdef CONFIG_READLINE_EDIT
cursor = 0;
#endif
#ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
insearch = false;
searchlen = 0;
#endif
for (; ; )
{
/* Get the next character. readline_rawgetc() returns EOF on any
* errors or at the end of file.
*/
int ch = RL_GETC(vtbl);
/* Check for end-of-file or read error */
if (ch == EOF)
{
/* Did we already received some data? */
if (nch > 0)
{
/* Yes.. Terminate the line (which might be zero length)
* and return the data that was received. The end-of-file
* or error condition will be reported next time.
*/
buf[nch] = '\0';
return nch;
}
return EOF;
}
#ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
/* Are we in reverse incremental search mode (Ctrl+R)? If so,
* every subsequent keystroke is interpreted as part of the
* search until it is accepted, submitted, or cancelled.
*/
else if (insearch)
{
if (ch == CTRL_R)
{
/* Repeat: search further back for another match of the
* same search string.
*/
bool found = isearch_find(search, searchlen, searchoffset,
&searchoffset, buf, buflen, &nch);
# ifdef CONFIG_READLINE_ECHO
isearch_redraw(vtbl, search, searchlen, buf, nch, !found);
# endif
}
else if (ch == ASCII_BS || ch == ASCII_DEL)
{
if (searchlen > 0)
{
searchlen--;
searchoffset = 1;
if (searchlen > 0)
{
isearch_find(search, searchlen, searchoffset,
&searchoffset, buf, buflen, &nch);
}
else
{
nch = 0;
}
}
# ifdef CONFIG_READLINE_ECHO
isearch_redraw(vtbl, search, searchlen, buf, nch,
searchlen > 0 && nch == 0);
# endif
}
else if (ch == CTRL_G || ch == ASCII_ETX) /* ^G or ^C: cancel */
{
/* Cancel: restore the line exactly as it was before
* Ctrl+R was pressed.
*/
insearch = false;
nch = savednch;
cursor = savedcursor;
for (i = 0; i < nch; i++)
{
buf[i] = savedbuf[i];
}
buf[nch] = '\0';
# ifdef CONFIG_READLINE_ECHO
redraw_line(vtbl, buf, nch, cursor);
# endif
}
else if (ch == '\n')
{
/* Accept the current match and submit it immediately,
* exactly as bash does.
*/
insearch = false;
return submit_line(buf, nch);
}
else if (ch == ASCII_ESC)
{
/* Accept the current match into the line, then let the
* escape sequence that follows (if any) be processed
* normally against it on the next iteration(s).
*/
insearch = false;
cursor = nch;
escape = 1;
}
else if (!iscntrl(ch & 0xff) && searchlen < RL_CMDHIST_LINELEN - 1)
{
search[searchlen++] = (char)ch;
searchoffset = 1;
bool found = isearch_find(search, searchlen, searchoffset,
&searchoffset, buf, buflen, &nch);
# ifdef CONFIG_READLINE_ECHO
isearch_redraw(vtbl, search, searchlen, buf, nch, !found);
# endif
}
else
{
/* Anything else (an unhandled control character) just
* accepts the current match and returns to normal
* editing.
*/
insearch = false;
cursor = nch;
# ifdef CONFIG_READLINE_ECHO
redraw_line(vtbl, buf, nch, cursor);
# endif
}
continue;
}
#endif /* CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH */
/* Are we processing a VT100 escape sequence */
else if (escape)
{
#ifdef CONFIG_READLINE_EDIT
/* Delete key: ESC [ 3 ~ — waiting for '~' */
if (escape == 3)
{
escape = 0;
if (ch == '~')
{
if (cursor < nch)
{
int k;
for (k = cursor + 1; k < nch; k++)
buf[k - 1] = buf[k];
nch--;
}
# ifdef CONFIG_READLINE_ECHO
/* Delete ("ESC [ 3 ~") may leave a stray '~' on
* terminals that do not fully suppress local echo.
* Always use redraw_line(), even if nothing was
* deleted, to resync the cursor and clear any leaked
* characters.
*/
redraw_line(vtbl, buf, nch, cursor);
# endif
}
continue;
}
if (escape == 4 || escape == 5)
{
if (ch == '~')
{
/* Home (1~) or End (4~) */
cursor = (escape == 4) ? 0 : nch;
redraw_line(vtbl, buf, nch, cursor);
}
if (ch == ';')
{
escape = 8;
continue;
}
escape = 0;
continue;
}
#endif
#ifdef CONFIG_READLINE_EDIT
if (escape == 8) /* CSI ; — waiting for modifier digit */
{
if (ch == '5')
{
escape = 9; /* Ready for final char */
continue;
}
if (ch == ';')
{
escape = 8;
continue;
}
escape = 0;
continue;
}
if (escape == 9) /* CSI ;5 — waiting for D or C */
{
escape = 0;
if (ch == 'D') /* Ctrl+Left */
{
cursor = word_skip(buf, cursor, 0, false);
redraw_line(vtbl, buf, nch, cursor);
}
else if (ch == 'C') /* Ctrl+Right */
{
cursor = word_skip(buf, cursor, nch, true);
redraw_line(vtbl, buf, nch, cursor);
}
continue;
}
#endif /* CONFIG_READLINE_EDIT */
if (escape == 10) /* Unrecognized CSI -- consume to final byte */
{
if (ch >= 0x20 && ch <= 0x3f)
{
continue; /* still a parameter/intermediate byte */
}
/* ch is the final byte (0x40-0x7e), or something
* malformed -- either way the sequence is over now and
* is discarded; nothing was ever inserted into the
* buffer. Still issue a corrective redraw: some serial
* drivers only know how to suppress local echo for
* fixed 3-byte "ESC [ x" sequences and leak bytes from
* any longer, unrecognized sequence as literal
* characters, the same class of issue Delete has for
* its own "ESC [ 3 ~". redraw_line() cleans up any
* such leaked characters even though the buffer itself
* was never affected by them.
*/
escape = 0;
# ifdef CONFIG_READLINE_ECHO
# ifdef CONFIG_READLINE_EDIT
redraw_line(vtbl, buf, nch, cursor);
# endif
# endif
continue;
}
/* Recognize SS3 ("ESC O") escape sequences used by some
* terminals (e.g. xterm) for Home/End and application cursor
* keys, handling them the same as CSI ("ESC [") to avoid
* inserting stray "OH"/"OF" characters into the input.
*/
if (escape == 1 && ch == ASCII_O)
{
escape = 6;
continue;
}
/* Yes, is it an <esc>[, 3 byte sequence */
if (ch != ASCII_LBRACKET || escape == 2 || escape == 6)
{
/* We are finished with the escape sequence */
#ifdef CONFIG_READLINE_CMD_HISTORY
/* Intercept up and down arrow keys. This must only run
* for the up/down arrow keys themselves -- previously the
* clear-and-reload logic below ran for *any* completed
* escape sequence (Left, Right, Home, End, Delete, ...)
* as long as some history existed, silently wiping
* whatever the user was currently typing.
*/
if (g_cmdhist.len > 0 && (ch == 'A' || ch == 'B'))
{
if (ch == 'A') /* up arrow */
{
/* Go to the past command in history */
g_cmdhist.offset--;
if (-g_cmdhist.offset >= g_cmdhist.len)
{
g_cmdhist.offset = -(g_cmdhist.len - 1);
}
}
else /* down arrow */
{
/* Go to the recent command in history */
g_cmdhist.offset++;
if (g_cmdhist.offset > 1)
{
g_cmdhist.offset = 1;
}
}
/* Clear the current command safely regardless of the
* cursor position. Move to the start of the line,
* erase to end-of-line, and redraw the prompt,
* avoiding accidental deletion of prompt characters
* when the cursor is not at the command end.
*/
nch = 0;
# ifdef CONFIG_READLINE_ECHO
RL_PUTC(vtbl, '\r');
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
# if defined(CONFIG_READLINE_TABCOMPLETION) || defined(CONFIG_READLINE_EDIT)
if (g_readline_prompt != NULL)
{
int k;
for (k = 0; g_readline_prompt[k] != '\0'; k++)
{
RL_PUTC(vtbl, g_readline_prompt[k]);
}
}
# endif
# endif
if (g_cmdhist.offset != 1)
{
int idx = g_cmdhist.head + g_cmdhist.offset;
/* Circular buffer wrap around */
if (idx < 0)
{
idx = idx + RL_CMDHIST_LEN;
}
else if (idx >= RL_CMDHIST_LEN)
{
idx = idx - RL_CMDHIST_LEN;
}
for (i = 0;
g_cmdhist.buf[idx][i] != '\0' &&
nch + 1 < buflen;
i++)
{
buf[nch++] = g_cmdhist.buf[idx][i];
RL_PUTC(vtbl, g_cmdhist.buf[idx][i]);
}
buf[nch] = '\0';
}
/* The line was just wholesale replaced -- the cursor
* must always end up in sync with the new length, or
* later edits (insert/delete) will index into buf[]
* using a stale, out-of-range cursor value.
*/
# ifdef CONFIG_READLINE_EDIT
cursor = nch;
# endif
}
#endif /* CONFIG_READLINE_CMD_HISTORY */
#ifdef CONFIG_READLINE_EDIT
if (ch == '1')
{
escape = 4;
continue;
}
if (ch == ';')
{
escape = 8;
continue;
}
if (ch == '3')
{
escape = 3;
continue;
}
if (ch == '4')
{
escape = 5;
continue;
}
if (ch == 'F')
{
escape = 0;
cursor = nch;
/* Redraw full line — cursor ends at end */
redraw_line(vtbl, buf, nch, cursor);
continue;
}
if (ch == 'D' && cursor > 0)
{
cursor--;
escape = 0;
RL_WRITE(vtbl, g_curleft, sizeof(g_curleft));
continue;
}
if (ch == 'C' && cursor < nch)
{
cursor++;
escape = 0;
RL_WRITE(vtbl, g_curright, sizeof(g_curright));
continue;
}
if (ch == 'H')
{
escape = 0;
cursor = 0;
/* Redraw full line from column 0 */
redraw_line(vtbl, buf, nch, cursor);
continue;
}
#endif
/* Not one of the specific sequences recognized above. If
* this still looks like a CSI parameter or intermediate
* byte (0x20-0x3f: digits, ';', and similar), this is
* some other CSI sequence this code doesn't specifically
* know about -- keep consuming bytes until the real final
* byte (0x40-0x7e) ends it, rather than treating this
* byte as the end of the sequence and leaking whatever
* comes after it as literal input.
*/
if (ch >= 0x20 && ch <= 0x3f)
{
escape = 10;
continue;
}
escape = 0;
ch = 'a';
}
else
{
/* The next character is the end of a 3-byte sequence.
* NOTE: Some of the <esc>[ sequences are longer than
* 3-bytes, but I have not encountered any in normal use
* yet and, so, have not provided the decoding logic.
*/
escape = 2;
}
}
/* Check for backspace
*
* There are several notions of backspace, for an elaborate summary see
* http://www.ibb.net/~anne/keyboard.html. There is no clean solution.
* Here both DEL and backspace are treated like backspace here. The
* Unix/Linux screen terminal by default outputs DEL (0x7f) when the
* backspace key is pressed.
*/
else if (ch == ASCII_BS || ch == ASCII_DEL)
{
#ifdef CONFIG_READLINE_EDIT
/* Delete character before cursor */
if (cursor > 0)
{
int k;
for (k = cursor; k < nch; k++)
{
buf[k - 1] = buf[k];
}
cursor--;
nch--;
# ifdef CONFIG_READLINE_ECHO
/* Redraw: backspace, clear EOL, redraw tail, restore cursor */
RL_PUTC(vtbl, ASCII_BS);
redraw_tail(vtbl, buf, nch, cursor);
# endif
}
#else
if (nch > 0)
{
nch--;
# ifdef CONFIG_READLINE_ECHO
RL_PUTC(vtbl, ASCII_BS);
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
# endif
}
#endif
}
/* Check for the beginning of a VT100 escape sequence */
else if (ch == ASCII_ESC)
{
/* The next character is escaped */
escape = 1;
}
/* Check for end-of-line. This is tricky only in that some
* environments may return CR as end-of-line, others LF, and
* others both.
*/
else if (ch == '\n')
{
return submit_line(buf, nch);
}
/* Emacs-style control keys */
#ifdef CONFIG_READLINE_EDIT_EMACS
else if (ch == CTRL_A) /* Ctrl+A = Home */
{
cursor = 0;
redraw_line(vtbl, buf, nch, cursor);
}
else if (ch == CTRL_B) /* Ctrl+B = Left */
{
if (cursor > 0)
{
cursor--;
RL_WRITE(vtbl, g_curleft, sizeof(g_curleft));
}
}
else if (ch == CTRL_D) /* Ctrl+D = Delete at cursor */
{
if (cursor < nch)
{
int k;
for (k = cursor + 1; k < nch; k++)
{
buf[k - 1] = buf[k];
}
nch--;
redraw_tail(vtbl, buf, nch, cursor);
}
}
else if (ch == CTRL_E) /* Ctrl+E = End */
{
while (cursor < nch)
{
cursor++;
RL_WRITE(vtbl, g_curright, sizeof(g_curright));
}
}
else if (ch == CTRL_F) /* Ctrl+F = Right */
{
if (cursor < nch)
{
cursor++;
RL_WRITE(vtbl, g_curright, sizeof(g_curright));
}
}
else if (ch == CTRL_K) /* Ctrl+K = Kill to EOL */
{
nch = cursor;
buf[nch] = '\0';
RL_WRITE(vtbl, g_erasetoeol, sizeof(g_erasetoeol));
}
else if (ch == CTRL_U) /* Ctrl+U = Kill to BOL */
{
int j;
for (j = cursor; j < nch; j++)
{
buf[j - cursor] = buf[j];
}
nch -= cursor;
cursor = 0;
buf[nch] = '\0';
redraw_line(vtbl, buf, nch, cursor);
}
else if (ch == CTRL_W) /* Ctrl+W = Kill word backward */
{
int start, k;
start = word_skip(buf, cursor, 0, false);
for (k = cursor; k < nch; k++)
{
buf[k - (cursor - start)] = buf[k];
}
nch -= (cursor - start);
cursor = start;
buf[nch] = '\0';
/* Unlike Ctrl+K, Ctrl+W moves the cursor back by a variable
* number of columns. Use redraw_line() instead of
* redraw_tail() so the line is redrawn correctly regardless
* of the cursor position, matching Delete handling.
*/
redraw_line(vtbl, buf, nch, cursor);
}
# ifdef CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH
else if (ch == CTRL_R && g_cmdhist.len > 0)
{
/* Ctrl+R = start a reverse incremental search through the
* command history, bash-style. Save the line currently
* being edited so it can be restored if the search is
* cancelled (Ctrl+G).
*/
insearch = true;
searchlen = 0;
searchoffset = 1;
savednch = nch;
if (savednch > RL_CMDHIST_LINELEN - 1)
{
savednch = RL_CMDHIST_LINELEN - 1;
}
for (i = 0; i < savednch; i++)
{
savedbuf[i] = buf[i];
}
savedcursor = cursor;
nch = 0;
# ifdef CONFIG_READLINE_ECHO
isearch_redraw(vtbl, search, searchlen, buf, nch, false);
# endif
}
# endif /* CONFIG_READLINE_EDIT_EMACS_REVERSE_SEARCH */
#endif /* CONFIG_READLINE_EDIT_EMACS */
/* Otherwise, put the character in the line buffer if the
* character is not a control byte
*/
else if (!iscntrl(ch & 0xff))
{
#ifdef CONFIG_READLINE_EDIT
/* Defensive check: 'cursor' must always satisfy
* 0 <= cursor <= nch. It should never be able to get out of
* that range now, but clamp it rather than trust it blindly
* -- indexing buf[] with an out-of-range cursor is a
* memory-safety bug (a stale cursor previously let this
* write arbitrarily far past the end of the caller's
* buffer).
*/
if (cursor < 0 || cursor > nch)
{
cursor = nch;
}
/* Only insert if there is room for the new character plus
* the line's null terminator. Checking this before writing
* (rather than only after, as the non-editing path below
* does) is what actually prevents the out-of-bounds write.
*/
if (nch + 1 < buflen)
{
int j;
for (j = nch; j > cursor; j--)
{
buf[j] = buf[j - 1];
}
buf[cursor] = (char)ch; nch++; cursor++;
# ifdef CONFIG_READLINE_ECHO
redraw_tail(vtbl, buf, nch, cursor);
# endif
}
#else
buf[nch++] = ch;
#endif /* CONFIG_READLINE_EDIT */
/* Check if there is room for another character and the line's
* null terminator. If not then we have to end the line now.
*/
if (nch + 1 >= buflen)
{
buf[nch] = '\0';
return nch;
}
}
#ifdef CONFIG_READLINE_TABCOMPLETION
else if (ch == '\t') /* TAB character */
{
/* tab_completion() leaves the terminal cursor at the end of
* the line whenever it modifies or redraws the input, so
* resync 'cursor' in that case. If no completion occurred,
* leave 'cursor' unchanged to preserve its current position.
*/
if (tab_completion(vtbl, buf, buflen, &nch))
# ifdef CONFIG_READLINE_EDIT
{
cursor = nch;
}
# endif
; /* keep this ';' to close the if() if no CONFIG_READLINE_EDIT */
}
#endif
}
}
Reference in a new issue View git blame Copy permalink