This companion change updates the nuttx-apps CMake build to use
NuttX’s NUTTX_DIR and NUTTX_BINARY_DIR instead of CMAKE_SOURCE_DIR
and CMAKE_BINARY_DIR, which incorrectly refer to the outermost project
when NuttX is embedded via add_subdirectory(). Since apps/ is itself
included from NuttX’s top-level CMakeLists.txt, these variables were
effectively being used as references to NuttX’s root and inherited
the same bug fixed in the matching NuttX change for #19697. All
self-referencing uses are replaced while intentionally preserving
standalone projects and unrelated custom variables or hardcoded paths.
The change affects only the CMake build system, preserves normal
standalone behavior, and was tested with sim:nsh both standalone and
embedded, with apps such as hello and ostest successfully built and
available in NSH.
Fixes#19697.
Assisted-by: Claude:claude-sonnet-5
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Forward the packets received by a LoRa concentrator to a LoRaWAN network
server with the Semtech UDP protocol version 2, and turn the downlink
requests of the server into transmissions. The server may be given as a name
and is resolved with getaddrinfo(). No floating point is used anywhere.
The same program provides the "lora" command, which mirrors the AT command
set of the vendor gateway firmwares, plus tx, which sends a single packet and
so brings a gateway up against any LoRa receiver without a network server.
Nothing here names a chip: the types and the commands are the device
independent gateway ones of the nuttx repository,
nuttx/wireless/lpwan/lora_gw.h. The application depends on LPWAN_LORA_GW,
the symbol such a driver selects, so until one is merged nothing here is
compiled.
Assisted-by: Claude Code 4.8
Signed-off-by: Jorge Guzman <jorge.gzm@gmail.com>
The controller<->host ACL pool was hardcoded to 10 buffers (~6 KiB with
the 251-byte ACL size). Expose NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT and
NIMBLE_TRANSPORT_ACL_FROM_HS_COUNT (default 10) so RAM-constrained
single-connection peripherals can lower it.
Signed-off-by: raiden00pl <raiden00@railab.me>
it's not needed and cause warnings for C++ builds:
cc1plus: warning: command-line option '-Wno-pointer-to-int-cast' is valid for C/ObjC but not for C++
Signed-off-by: raiden00pl <raiden00@railab.me>
Replace app-side includes of <debug.h> with <nuttx/debug.h> to use the
header from the NuttX tree explicitly after the header move.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Update NimBLE to the latest master. This includes fixing the debug log control,
which was broken since:
da4e2f0f12
The debug log was always enable and it wasn't possible to disable it.
Signed-off-by: raiden00pl <raiden00@railab.me>
remove empty strings from FetchContent to eliminate cmake build warnings like this:
CMake Warning (dev) at /usr/share/cmake/Modules/FetchContent.cmake:1564 (cmake_parse_arguments):
The BUILD_COMMAND keyword was followed by an empty string or no value at
all. Policy CMP0174 is not set, so cmake_parse_arguments() will unset the
ARG_BUILD_COMMAND variable rather than setting it to an empty string.
Signed-off-by: raiden00pl <raiden00@railab.me>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
libuv:
CC: pthread/pthread_mutexattr_setrobust.c libuv/src/unix/thread.c: In function ‘uv_thread_create_ex’:
libuv/src/unix/thread.c:174:24: error: storage size of ‘param’ isn’t known
174 | struct sched_param param;
| ^~~~~
btsak_main:
In file included from btsak_main.c:39:
btsak.h:149:1: error: unknown type name ‘bool’
149 | bool btsak_str2bool(FAR const char *str);
pipe_main.c:
CC: sim/sim_registerdump.c pipe_main.c:44:30: error: unknown type name ‘pthread_addr_t’
44 | static void *open_write_only(pthread_addr_t pvarg)
| ^~~~~~~~~~~~~~
pipe_main.c: In function ‘pipe_main’:
pipe_main.c:81:3: error: unknown type name ‘pthread_t’
81 | pthread_t writeonly;
redirect_test.c: In function ‘redirection_test’:
redirect_test.c:205:3: error: unknown type name ‘pthread_t’
205 | pthread_t readerid;
| ^~~~~~~~~
redirect_test.c:206:3: error: unknown type name ‘pthread_t’
206 | pthread_t writerid;
| ^~~~~~~~~
drivertest_posix_timer.c:48:29: error: ‘optarg’ undeclared (first use in this function)
48 | value = (type)strtoul(optarg, &ptr, base); \
drivertest_posix_timer.c:208:3: warning: implicit declaration of function ‘sleep’ [-Wimplicit-function-declaration]
208 | sleep(SLEEPSECONDS);
| ^~~~~
drivertest_uart.c:92:13: warning: implicit declaration of function ‘read’; did you mean ‘fread’? [-Wimplicit-function-declaration]
92 | len = read(fd, &tmp_char, 1);
| ^~~~
| fread
drivertest_uart.c:323:44: error: ‘optopt’ undeclared (first use in this function)
323 | printf("Unknown option: %c\n", optopt);
kernel/fs/cases/fs_getfilep_test.c:71:9: warning: implicit declaration of function ‘fs_getfilep’ [-Wimplicit-function-declaration]
71 | ret = fs_getfilep(fileno(fp), &filep);
| ^~~~~~~~~~~
kernel/mm/cases/mm_test_008.c:148:9: warning: implicit declaration of function ‘task_create’; did you mean ‘timer_create’? [-Wimplicit-function-declaration]
148 | pid = task_create("TestNuttx08_routine_1",
| ^~~~~~~~~~~
| timer_create
/home/ajh/work/nuttxwork/apps/testing/cmocka/cmocka_main.c:171:11: warning: implicit declaration of function ‘setenv’ [-Wimplicit-function-declaration]
171 | setenv("CMOCKA_XML_FILE", xml_path, 1);
| ^~~~~~
drivertest_pm_runtime.c:123:7: warning: implicit declaration of function ‘usleep’ [-Wimplicit-function-declaration]
123 | usleep(210 * 1000);
| ^~~~~~
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Will cause compilation warning if NDEBUG is defined We can't modify the code of the external library, so let's ignore it
services/ans/src/ble_svc_ans.c:450:9: error: variable 'rc' set but not used [-Werror=unused-but-set-variable]
450 | int rc;
| ^~
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
When running a dual stack (usrsock daemon and kernel stack),
ioctl requests that should be handled by the kernel stack are being
processed by the usrsock daemon. This causes ifconfig and ifup to fail.
The usrsock daemon that receives an ioctl request that should be
handled by the kernel stack should reply with ENOTTY.
Replying with ENOTTY means that the ioctl request can fall back to the
kernel stack.
Support SIOCDENYINETSOCK ioctl command to set usrsock status.
If usock_enable is false, its means application wants to create
a socket with other network stack.
The NimBLE source code is downloaded at the first pass of the
make system so some makefiles to include might be not in place
initially, but included after code is fetched
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
1. add Makefile.nimble that helps integrate NimBLE with custom applications
To enable NimBLE for an custom application, user needs to include Makefile.nimble in the app's Makefile:
include $(APPDIR)/wireless/bluetooth/nimble/Makefile.nimble
2. add NuttX specific syscfg.h
- file based on nimble/porting/examples/nuttx/include/syscfg/syscfg.h
- all unnecessary definitions was removed
- definitions are configurable from Kconfig
3. add NuttX specific logcfg.h
- bind NimBLE logging with debug.h macros
Currently the help messages use "private" string while code
expects "random".
Remove not needed (CODE void *) cast.
Use 'nitems' macro to calculate number of elements in array
Align output in `btsak_cmd_scanget` command.
Fix style issues
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Similarly to the alg_flag (which can be set by text), the ver_flag
is able to select the WPA version which will be sent to the Wi-Fi
driver through the `IW_AUTH_WPA_VERSION` command. A new bit field
(IW_AUTH_WPA_VERSION_WPA3) was created to indicate WPA3 is set.
It's up to the arch's Wi-Fi driver to implement handling of this
new bit field and config the underlying driver to handle WPA3 on
AP and/or STA mode.
This implementation doesn't interfere with commonly used commands.
`wapi psk wlan0 mypasswd 3` still selects CCMP algorithm and WPA2
and is equivalent to `wapi psk wlan0 mypasswd 3 WPA_VER_2`.
One can use `wapi psk wlan0 mypasswd 3 WPA_VER_3` to set WPA3.
Add the `WAPI_ESSID_DELAY_ON` member of the `wapi_essid_flag_e`
enum to its textual counterpart in `g_wapi_essid_flags`. This
enables `wapi`'s usage to describe it properly.
